Regresar
-
Título
How to reset iDrac password -
Descripción
Need to reset iDrac password. -
Causa
-
Resolución
There're three ways of doing this. Two of them require console level access:Option A:1. Turn on or reboot the managed system2. During Power-On Self-Test (POST), press <F2> when F2 = System Setup appears in the upper right corner of the screen.3. On the System Setup Main Menu, click iDRAC Settings, System configuration, UsersOption B:1. Turn on or reboot the managed system.2. During Power-On Self-Test (POST), press <F2> when F2 = System Setup appears in the upper right corner of the screen.3. On the System Setup Main Menu, click iDRAC Settings → Reset iDRAC Configurations to Defaults.*If you are working remotely, connectivity is lost while the iDRAC resets. Reset to defaults takes approximately five minutes and iDrac network settings need to be reconfigured.Option C:If there's a good, reliable, stable connection to the DR through SSH. Then the iDRAC could be reset and reconfigured with the following DR commands:maintenance --remote_access --racresetmaintenance --remote_access --enable --setstatic_ip --ip a.b.c.d --netmask a.b.c.d --gateway a.b.c.dDefault credentials are as follow:User: rootPassword: calvin