Chat now with support
Chat mit Support

Rapid Recovery 6.3 - Command Line and Scripting Reference Guide

Rapid Recovery overview and system requirements Command Line Management Utility PowerShell Module
Prerequisites for using PowerShell Working with commands and cmdlets Rapid Recovery PowerShell module cmdlets
Add-CredentialsVaultAccount AddEncryptionKeytoProtectedMachine Add-EsxAutoProtectObjects Add-EsxVirtualMachines Add-HyperVClusterSharedVirtualDisks Add-HyperVClusterVirtualMachines Add-HyperVVirtualMachines Disable-HyperVAutoProtection Edit-ActiveBlockMapping Edit-AzureVirtualStandby Edit-EsxiVirtualStandby Edit-EsxServerProtectionRules Edit-ExcludedFilesAndFolders Edit-HyperVClusterProtectionRules Edit-HyperVServerProtectionRules Edit-HyperVVirtualStandby Edit-OracleDBVerifyNightlyJob Edit-OracleLogTruncationNightlyJob Edit-Replication Edit-ScheduledArchive Edit-VBVirtualStandby Edit-VMVirtualStandby Enable-HyperVAutoProtection Enable-OracleArchiveLogMode Get-ActiveJobs Get-CloudAccounts Get-Clusters Get-CompletedJobs Get-CredentialsVaultAccounts Get-ExchangeMailStores Get-Failed Get-FailedJobs Get-HyperVClusterSharedVirtualDisks Get-ListAzureVMSizes Get-Mounts Get-OracleInstanceMetadata Get-OracleInstances Get-Passed Get-ProtectedServers Get-ProtectionGroups Get-ProtectionRules Get-QueuedJobs Get-RecoveryPoints Get-ReplicatedServers Get-Repositories Get-ScheduledArchives Get-SqlDatabases Get-TransferQueueEntries Get-UnprotectedVolumes Get-Version Get-VirtualizedServers Get-Volumes Join-CredentialsVaultAccount New-AzureVirtualStandby New-Base New-BootCD New-CloudAccount New-EncryptionKey New-EsxiVirtualStandby New-FileSearch New-HyperVVirtualStandby New-Mount New-Replication New-Repository New-ScheduledArchive New-Snapshot New-VBVirtualStandby New-VMVirtualStandby Open-DvmRepository Push-Replication Push-Rollup Remove-Agent Remove-CredentialsVaultAccount Remove-EncryptionKey Remove-EsxAutoProtectObjects Remove-EsxVirtualMachines Remove-HyperVClusterSharedVirtualDisks Remove-HyperVClusterVirtualMachines Remove-HyperVVirtualMachines Remove-Mount Remove-Mounts Remove-RecoveryPoints Remove-Replication Remove-Repository Remove-ScheduledArchive Remove-VirtualStandby Restart-CoreService Resume-Replication Resume-ScheduledArchive Resume-Scheduler Resume-Snapshot Resume-VirtualStandby Set-AgentMetadataCredentials Set-CredentialsVaultAccount Set-DedupCacheConfiguration Set-License Set-OracleMetadataCredentials Set-ReplicationResponse Start-Archive Start-AttachabilityCheck Start-AzureDeploy Start-AzureExport Start-BackupSettings Start-ChecksumCheck Start-ConfigureAgentMigration Start-ConsumeSeedDrive Start-CopySeedDrive Start-EsxiExport Start-HypervExport Start-LogTruncation Start-MountabilityCheck Start-OptimizationJob Start-OracleDBVerifyJob Start-OracleLogTruncationJob Start-Protect Start-ProtectCluster Start-ProtectEsxServer Start-ProtectHyperVCluster Start-ProtectHyperVServer Start-RepositoryCheck Start-RestoreAgent Start-RestoreArchive Start-RestoreSettings Start-RestoreUrc Start-ScheduledArchive Start-VBExport Start-VirtualStandby Start-VMExport Stop-ActiveJobs Stop-CoreService Suspend-Replication Suspend-ScheduledArchive Suspend-Scheduler Suspend-Snapshot Suspend-VirtualStandby Update-Repository
Localization Qualifiers
Scripting

New-CloudAccount

The New-CloudAccount command lets you add a new cloud account to the Rapid Recovery Core.

Usage

The usage for the command is as follows: 

New-CloudAccount -core [host name] -user [login] -password [password] -displayname [display name] -type [cloud acco
    unt type] -username [user name] - key [secret key] -region [region] - tenantid [tenant Id] -authurl [authorization
    url]
Command Options

The following table describes the options available for the New-CloudAccount command:

Table 136: New-CloudAccount command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine. 
-user
 Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used. 

-password
 Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used. 

-displayname
 The name of the cloud account to display. 
-type

The type of cloud account you want to add. Supported values include:

  • amazon
  • openstack
  • rackspace
  • windowsazure
  • "windows azure"
  • azure 

-username

The user name for the cloud account that you want to add. It is used in the authentication process. This property resolves as "Access Key" for Amazon™ cloud, "User Name" for Rackspace and OpenStack, and "Storage Account Name" for Windows Azure cloud accounts. 

-key

The key for the cloud account you want to add. It is used in the authentication process. This property resolves as "Secret Key" for Amazon™ cloud, "Api Key" for Rackspace and OpenStack, and "Access Key" for a Windows Azure cloud accounts. 

-region

The region of the cloud account that you want to add. This property is required only for RackSpace and OpenStack cloud accounts. 

-tenantid

The identifier that is used in the authentication process of an OpenStack cloud account. This option is required only for OpenStack cloud accounts. 

-authurl

The URL that is used in the authentication process of an OpenStack cloud account. This option is required only for OpenStack cloud accounts.

Examples:

Create a new Amazon™ S3 cloud account named "Amazon S3 Account" with the access key "akey" and the secret key "skey." 

>New-CloudAccount -displayname "Amazon S3 Account" -type Amazon -username akey -key skey

New-EncryptionKey

The New-EncryptionKey command lets you create a new encryption key for securing your backed up Rapid Recovery data.

Usage

The usage for the command is as follows: 

New-EncryptionKey -core [host name] -user [login] -password [password] -name [encryption key name] -passphrase [pas
    sphrase] -comment [comment]
Command Options

The following table describes the options available for the New-EncryptionKey command:

Table 137: New-EncryptionKey command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine. 
-user
 Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used. 

-password
 Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used. 

-name
 The name of the encryption key that you want to create. 
-passphrase
 The passphrase to the encryption key that you want to create. 
-comment
 Optional. The description of the encryption key.
Examples:

Create an encryption key on the local Core: 

>New-EncryptionKey –name EncryptionKey1 -passphrase 123456

New-EsxiVirtualStandby

The New-EsxiVirtualStandby PowerShell command lets you create a new ESXi virtual standby machine using Rapid Recovery.

Usage

The usage for the command is as follows: 

New-EsxiVirtualStandby -core [host name] -user [login] -password [password] -protectedserver [name | IP address] -volumes [volumes names] -vmname [virtual machine name] -hostname [virtual host name] -hostport [virtual host port number] -hostusername [virtual host login] -hostpassword [virtual host password] [-ram [total megabytes] | -usesourceram] -diskprovisioning [thin | thick] -diskmapping [automatic | manual | withvm] -initialexport
Command Options

The following table describes the options available for the New-EsxiVirtualStandby command:

Table 138: New-EsxiVirtualStandby command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine. 
-user
 Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used. 

-password
 Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used. 

-protectedserver
 Show jobs for a specific protected machine, indicated by IP address. 
-volumes
 Optional. List the volume names you want to export. If not specified, all volumes in the recovery points are exported. Values must be enclosed in double quotes and separated by a space.

NOTE: Do not use trailing slashes in volume names. For example, specify “c:” not “c:/”.

-vmname
 The Microsoft Windows name of the virtual machine. 
-hostname
 The name of the virtual server host. 
-hostport
 The port number to use for communicating with the virtual server. 
-hostusername
 The user name for logging in to the virtual server host. 
-hostpassword
 The password for logging in to the virtual server host. 
-ram
 Allocate a specific amount of RAM on the virtual server. 
-usesourceram
 Optional. Allocate the same amount of RAM on the virtual server that the source protected machine has. 
-diskprovisioning
 Optional. The amount of disk space to allocate on the virtual machine. Available values include:
  • Thick - Specify 'thick' to make the virtual disk as large as the original drive on the protected server.
  • Thin - Specify 'thin' to allocate the amount of actual disk space occupied on the original drive plus some additional megabytes.
The default disk provisioning is 'thin'. 
-diskmappinjg
 Optional. It determines how to map the disks from the recovery point to the virtual machine. Available values include:
  • 'auto'
  • 'manual'
  • 'withvm'
The default setting is 'auto'. 
-initialexport
 Optional. Specify this option if you need to start an initial on-demand virtual machine export after configuring the virtual standby.
Examples:

Create a new ESXi virtual standby: 

>New-EsxiVirtualStandby -protectedserver 10.10.10.4 -vmname ExportedMachine -hostname 10.10.10.127 -hostport 443 -hostusername root -hostpassword pass123 -usesourceram -diskprovisioning thin -diskmapping auto

New-FileSearch

The New-FileSearch command lets you search for a specific file among the recovery points in a repository, which helps you determine which recovery point you need to mount for a restore.

Usage

The usage for the command is as follows: 

New-FileSearch -core [host name] -user [user name] -password [password] -protectedserver [name | IP address] -startdate [start date] -enddate [end date] -filemasks [file masks] -paths [paths] -subdiroff -ntfsfastoff -limitsearch [limit search]
Command Options

The following table describes the options available for the New-FileSearch command:

Table 139: New-FileSearch command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. 
-user
 Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. 
-password
 Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. 
-protectedserver
 Use this option to specify the protected machine for which you want to enable the Oracle archive log mode. 
-startdate
 The earliest date of a period within you want to conduct your search. Use the date pattern "MM/DD/YYYY HH:mm:ss AM." 
-enddate
 The latest date of a period within you want to conduct your search. Use the date pattern "MM/DD/YYYY HH:mm:ss AM." 
-filemasks
 A combination of fixed and wildcard characters to search for the file. It can be one string or an array of strings. All masks should be separated by a space; for example: -filemasks "first" "second." 
-paths
 Optional. If there are specific directories in which you want to search, use this option to list the paths. It can be one string or an array of strings. All directories should be separated by a space; for example: -paths "E:\" "C:\Program Files."
-subdiroff
 Optional. By default, the file search is performed in subdirectories. Use this option if you want to turn this feature off and not search in subdirectories. 
-ntfsfastoff
 Optional. By default, the file search is performed using the NTFS fast algorithm. If you want to perform the search without this feature, specify this option. 
-limitsearch
 Optional. Use this option to limit the number of search results. The default value is 1000.
Examples:

Perform a file search with one file mask: 

New-FileSearch -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.10.10 -filemasks "sample"

Perform a file search with multiple file masks in specified directories and without the NTFS fast algorithm: 

New-FileSearch -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.10.10 -filemasks "sample" "second" -paths "C:\dir" -ntfsfastoff
Verwandte Dokumente

The document was helpful.

Bewertung auswählen

I easily found the information I needed.

Bewertung auswählen