Chat now with support
Chat mit Support

DR Series Software 4.0.4 - Command Line Reference Guide

Introduction to the DR Series System Command Line Reference Guide Introducing the DR Series system Managing the DR Series system
Alerts Commands Authenticate Commands Network
Network Command Usage network --show network --delete network --restart network --setdhcp network --setstatic_ip [--bondif <bondN>] [--nwif <ethN>] --ip <IPv4/IPv6 address not already in use> --netmask <netmask> [--gateway <IPv4/IPv6 address>] network --create_bond network --create_eth network --add_member network --setdns [--suffix <dns suffix>] [--primary <IPv4/IPv6 address>] [--secondary <IPv4/IPv6 address>] network --setbonding --bondif <bondN> [--mode <ALB | 802.3ad>] [--mtu <supported MTU range 512 - 9000>] network --update network --factory_reset network --host network --route network --nslookup --destination <ip address | hostname> network --traceroute --destination <ip address | hostname> network --ping --destination <ip address | hostname> [--tries <number>] [--size <number>] [--interface <bondN | ethN>] network --blink network --enable network --disable=GUID-925B2D94-D583-4966-ABDE-8E3FE14B59FC=1=en-us= network --troubleshoot [--links] [--gateway] [--ntp] [--dns] [--active_domain] [--nis] [--clients] [--port_mapper] [--network_config] [--show_active <NFS|CIFS|OST|RDS|NDMP|ISCSI|FC>] [--interface <bondN | ethN>] network --troubleshoot --gateway --interface <bondN | ethN> network --troubleshoot [--show_active <NFS| CIFS|OST|NDMP|ISCSI|RDS>] network --tcpdump [--port <nfs | windows | replication | ost | rds>] [--pkt_size <128 - 32768>] [--file_size <0 - 100>] [--stop] [--host <ip address list>] [--interface <bondN | ethN>] network --tcpdump [--pkt_size <128 - 32768>] network --tcpdump [--file_size <0 - 100>] network --tcpdump [--host <ip address list>] network --tcpdump [--port <nfs | windows | replication | ost | rds>] network --iperf_client --server <ip address | hostname> [--port <number>] [--window_size <num bytes [KB/MB]>] [--interval <num seconds>] [--time <num seconds>] network --iperf_server [--port <number>] [--window_size <num bytes [KB/MB>] network --help
OST RDA Stats Storage Group commands System
System Command Usage system --show [--config] system --show [--hardware] system --show [--storage] [--type <boot | internal | external>] [--service_tag <service tag>] system --show [--storage] system --show [--license] [--verbose] system --show [--ntp] system --show [--version] system --show [--timezones [Region]] system --show [--upgradefile] system --show [--upgradehistory] system --show [--marker] system --show [--replication_traffic] system --show [--opdup_traffic] system --show [--backup_traffic] system --show [--mgmt_traffic] system --init system --init --secure_erase <1–pass/3-passes/7-passes> system --reboot system --shutdown system --upgrade system --license [--validate] [--add] system --setname --name <node_name> system --setdate [--date <date>] [--timezone <Region/Zone>] system --setntp [--add <server name>] system --setntp [--delete <server name>] system --setntp [--enable] system --setntp [--disable] system --setntp [--adjust_time] system --hybrid_replication [--enable][--disable][--status] system --rdairgap [--enable][--disable][--set_retention_period <0 days to 365 days>][--get_retention_period][--open][--close][--status] system --rdairgap_schedule [--start_time <HH:MM>][--end_time <HH:MM>][--remove] system --setlogin system --telnet [--enable | --disable] system --datacheck --enable system --datacheck --disable system --datacheck --throttle system --marker [--enable] [--disable] system --verify_on_read [--enable] [--disable] system --add_storage --enclosure <service tag> system --storage [--set_usage_alert <70% - 90%>] system --storage [--blink] [--type <internal | external>] [--service_tag <service tag>] [--disk <slot num>] system --storage [--unblink] [--type <internal | external>] [--service_tag <service tag>] [--disk <slot num> system --mgmt_traffic system --backup_traffic system --replication_traffic system --opdup_traffic system --help
User Virtual Machine
Maintaining the DR Series System
Diagnostics Maintenance
Maintenance Command Usage maintenance --filesystem [--start_scan [verify_data | verify_rda_metadata | verify_metadata] [--storage_group <name>] maintenance --filesystem [--stop_scan] maintenance --filesystem [--scan_status] maintenance --filesystem [--scan_report [verbose]] maintenance --filesystem [--repair_status [verbose]] maintenance --filesystem [--repair_history [verbose]] maintenance --filesystem [--scan_restart [verify_data | verify_rda_metadata | verify_metadata]] maintenance --filesystem [--repair_now] maintenance --filesystem [--reclaim_space] maintenance --filesystem [--clear_quarantine] maintenance --filesystem [--clear_quarantine] maintenance --filesystem --show_throughput maintenance --configuration [--backup] maintenance --configuration [--restore] maintenance --configuration [--reinit_dictionary] maintenance --configuration [--reset_web_certificate] maintenance --configuration --enable_sha256_web_certificate maintenance --hardware [--reinit_nvram] maintenance --hardware [--restore_hw_db] maintenance --hardware [--motherboard_replaced] maintenance --disk [--make_standby [slot num]] [--type <internal | external-<num> | service tag>] --clear_foreign] maintenance --remote_access [--show] maintenance --remote_access [--enable] maintenance --remote_access [--racreset] maintenance --remote_access [--static_ip] [--ip <IPv4/IPv6 address>] [--netmask <netmask>] [--gateway <IPv4/IPv6 address>] [--device <lom1|lom2|lom3|lom4>] maintenance --remote access [--disable] maintenance --vdisk --check_consistency --type <boot|internal|external> [--service_tag <service tag>] maintenance --help
Managing DR Series System Storage Operations
System Storage Operation Commands Connection Container VTL NDMP iSCSI FC Replication Seed Schedule
Data Integrity Checking Additional Linux Commands About us

stats --fc [--iostat] [--linkstat]

Description

This command displays statistics for Fibre Channel (FC) sessions on the current DR system. You can specify the following parameters with this command:

  • iostat — returns input/output statistics, such as bytes read

  • linkstats — provides statistics like frames received/sent, loss of sync, loss of signal, and link failures.

Syntax

stats --fc

Result

Target port: 50:00:65:b6:33:63:14:88

    Link Failure: 1
    Loss Of Sync: 0
    Loss Of Signal: 0
    Primitive Sequence Protocol Error: 0
    Invalid Transmission Word: 0
    Invalid CRC: 0
    NOS Received: 1
    Rx Frames: 295069
    Tx Frames: 590099


    Bytes Written               Bytes Read
    0                           51678208

    Initiator: 10:00:00:90:fa:a0:ae:0a
        Bytes Written                   Bytes Read
        0                               24576

    Initiator: 50:0a:09:80:00:88:a7:71
        Bytes Written                   Bytes Read
        0                               1900544

    Initiator: 50:0a:09:80:06:8d:9a:40
        Bytes Written                   Bytes Read
        0                               1900544

    Initiator: c0:03:ff:bd:1d:69:00:48
        Bytes Written                   Bytes Read
        0                               47851520

Target port: 50:00:65:b6:33:63:14:89

    Link Failure: 3
    Loss Of Sync: 0
    Loss Of Signal: 0
    Primitive Sequence Protocol Error: 0
    Invalid Transmission Word: 63
    Invalid CRC: 0
    NOS Received: 2
    Rx Frames: 555628
    Tx Frames: 1111214


    Bytes Written               Bytes Read
    0                           96420864

    Initiator: 10:00:00:90:fa:cf:49:5e
        Bytes Written                   Bytes Read
        0                               0

    Initiator: c0:03:ff:bd:1d:69:00:54
        Bytes Written                   Bytes Read
        0                               734208

    Initiator: c0:03:ff:bd:1d:69:00:58
        Bytes Written                   Bytes Read
        0                               94950400

    Initiator: c0:03:ff:bd:1d:69:00:60
        Bytes Written                   Bytes Read
        0                               734208



stats --fc --iostat
Target port: 50:00:65:b8:14:26:78:78

    Bytes Written               Bytes Read
    138577053696                3776857088

    Initiator: 20:01:00:0e:1e:d0:79:f8
        Bytes Written                   Bytes Read
        138577053696                    3776857088

Target port: 50:00:65:b8:14:26:78:79

    Bytes Written               Bytes Read
    0                           0



stats --fc --linkstat
Target port: 50:00:65:b8:14:26:78:78

    Link Failure: 4
    Loss Of Sync: 3
    Loss Of Signal: 3
    Primitive Sequence Protocol Error: 0
    Invalid Transmission Word: 0
    Invalid CRC: 0
    NOS Received: 4
    Rx Frames: 70594737
    Tx Frames: 7700330
    Abort Task Set: 0
    Clear Task Set: 0
    Clear ACA: 0
    LUN Reset: 0
    Target Reset: 0
				ABTS : 0

Target port: 50:00:65:b8:14:26:78:79

    Link Failure: 0
    Loss Of Sync: 0
    Loss Of Signal: 0
    Primitive Sequence Protocol Error: 0
    Invalid Transmission Word: 0
    Invalid CRC: 0
    NOS Received: 0
    Rx Frames: 0
    Tx Frames: 0
    Abort Task Set: 0
    Clear Task Set: 0
    Clear ACA: 0
    LUN Reset: 0
    Target Reset: 0
				ABTS : 0

stats --container --name <name>

Description

Displays the current statistics for a specific container in a DR Series system that you define by name using the DR Series system CLI --name <name> command.

Syntax

stats --container --name backupsys-60_replicate

Result

Container Name 		: backupsys-60_replicate
Container ID 			: 3
Total Inodes				: 1
Read Throughput 	: 3.91 MiB/s
Write Throughput	: 3.45 MiB/s
Current Files 		: 109931
Current Bytes 		: 6193231169
Cleaner Status 		: Done

stats --storage_group --name <name>

Description

This command displays statistics for a specific storage group as referenced by the --name <name> command option.

Syntax

stats --storage_group --name DefaultGroup

Result

Storage_group ID                : 0
Capacity Used                   : 380.4 GiB
Capacity Used in GB             : 408.425
Capacity Free                   : 3572.8 GiB
Capacity Free in GB             : 3836.313
Total Inodes                    : 810
Read Throughput                 : 0.00 MiB/s
Write Throughput                : 0.00 MiB/s
Current Files                   : 682
Current Bytes                   : 1351703380026
Post Dedupe Bytes               : 408536589100
Post Compression Bytes          : 408424845453
Post Encryption Bytes           : 0
Post Encryption Bytes in GiB    : 0.0 GiB
Bytes decrypted                 : 0
Cleaner Status                  : Pending
Compression Status              : Done
Encryption Status               : Disabled
Dedupe Savings                  : 69.78 %
Compression Savings             : 0.03 %
Total Savings                   : 69.78 %

stats --replication [--name <name>]

Description

Displays the current replication statistics for all containers in a DR Series system or for a specific container in a DR Series system that you define using the DR Series system CLI --name <name> command.

Syntax

stats --replication --name backup-acme-60_replicate

Result

Container Name 												: backup_acme-60_1234567
Replication Target Container 			: backup
Replication Target System 					: 10.25.19.16
Peer Status 														: Stopped
Replication State 										: INSYNC
Schedule Status												: Outside window (starts in 0 days 10 hours 6 min 0 sec
Replication Average Throughput 	: 4154 KiB/s
Replication Maximum Throughput 	: 15710 KiB/s
Network Average Throughput					: 3759 KiB/s
Network Maximum Throughput					: 14999 KiB/s
Network Bytes Sent										: 154.45 MiB
Network Savings 											: 56.60 %
Last INSYNC Time 										: 2012-06-20 09:11:42
Estimated Time To Sync							: 0 days 7 hours 3 minutes 19 seconds

Data replication history

File : /vargen/source/Office_Docs/Email/Outlook/3244.flate, 44.70%, 88773 bytes, 1305 KB/s, replicated at : 2012-06-19 11:47:03

File : /vargen/source/status/DEV/August11/dev-status.doc, 100.00%, 86200 bytes, 4310 KB/s, replicated at : 2012-06-19 11:47:03

File : /vargen/source/MKT/whitepaper/eng/324.tar.gz, 0.00%, 5182 bytes, 259 KB/s, replicated at : 2012-06-19 11:47:03

File : /vargen/source/acctspay/status/Sept11/3242.tar.gz, 65.23%, 94616 bytes, 1456 KB/s, replicated at : 2012-06-19 11:47:03

File : /vargen/source/revenue/Q311/interna/324.xls, 0.00%, 5152 bytes, 286 KB/s, replicated at : 2012-06-19 11:47:03

File : /vargen/source/projects/Q411/europe/3244.tar.gz, 62.94%, 8828 bytes, 1193 KB/s, replicated at : 2012-06-19 11:47:03
Verwandte Dokumente

The document was helpful.

Bewertung auswählen

I easily found the information I needed.

Bewertung auswählen