Chat now with support
Chat mit Support

DR Series Software 4.0.3 - Interoperability Guide

Supported software

This section lists the supported operating systems, applications, and protocols for the DR Series system.

Supported backup software

This section lists the supported operating systems, applications, and protocols for the DR Series system.

Table 22: Supported DMAs
Data Management Application (DMA) CIFS NFS RDA OST Rapid CIFS Rapid NFS NDMP VTL iSCSI VTL FC VTL
NetVault Backup  
v11.0* ✔ ✔ ✔       ✔ ✔ ✔
v11.1* ✔ ✔ ✔       ✔ ✔ ✔
v11.2* ✔ ✔ ✔       ✔ ✔ ✔
v11.3* ✔ ✔ ✔       ✔ ✔ ✔
v11.4 ✔ ✔ ✔       ✔ ✔ ✔
v11.4.5 ✔ ✔ ✔       ✔ ✔ ✔
vRanger  
v6.0 ✔ ✔              
v7.0 ✔ ✔              
v7.1 ✔ ✔ ✔            
v7.2 ✔ ✔ ✔            
v7.3 ✔ ✔ ✔            
v7.5 ✔ ✔ ✔            
v7.6 ✔ ✔ ✔            
AppAssure/RapidRecovery  
v4.7 ✔                
v5.3 (archive mode only) ✔                
v5.4 (archive mode only) ✔                
v6.1 (Rapid Recovery/DR Series Tiering. CIFS support is in archive mode only / RDA is for Recovery Point Tiering to R3) ✔   ✔            
Backup Exec  
v2010 R3 ✔     ✔          
v2012 ✔     ✔          
v2014 ✔     ✔       ✔  
BE15 ✔     ✔       ✔ ✔
BE16** ✔     ✔       ✔ ✔
BE20 ✔     ✔       ✔ ✔
NetBackup  
v7.0 ✔ ✔   ✔          
v7.1 ✔ ✔   ✔          
v7.5 ✔ ✔   ✔     ✔ ✔  
v7.6 ✔ ✔   ✔     ✔ ✔  
v7.7* ✔ ✔   ✔ ✔ ✔ ✔ ✔ ✔
v8.0*** ✔ ✔   ✔ ✔ ✔ ✔ ✔ ✔
CommVault Simpana  
v8 ✔ ✔              
v9 ✔ ✔     ✔ ✔      
v10* ✔ ✔     ✔ ✔ ✔ ✔ ✔
v11* ✔ ✔     ✔ ✔ ✔ ✔ ✔
EMC Networker  
v7.6 ✔ ✔     ✔ ✔      
v8.0 ✔ ✔     ✔ ✔      
v8.1 ✔ ✔     ✔ ✔ ✔ ✔  
v8.2 ✔ ✔     ✔ ✔ ✔ ✔  
IBM TSM  
v6.1 ✔ ✔              
v6.2 ✔ ✔              
v6.3 ✔ ✔     ✔ ✔      
v6.4 ✔ ✔     ✔ ✔      
v7.1 ✔ ✔     ✔ ✔   ✔  
Oracle RMAN  
v11g ✔ ✔     ✔ ✔      
v12c ✔ ✔     ✔ ✔      
CA ArcServe  
v16 ✔ ✔              
v16.5 ✔ ✔              
Veeam  
v6.0 ✔                
v6.1 ✔                
v7.0 ✔                
v7.5 ✔                
v8.0 ✔                
v9.0 ✔ ✔              
v9.5 ✔ ✔     ✔     ✔ ✔
HP Data Protector  
v7 ✔                
v8 ✔                
v9 ✔ ✔              
Bridgehead  
v3.2 ✔ ✔              
Atempo TimeNavigator  
v4.3 ✔ ✔              
Amanda  
Enterprise v3.3.5   ✔              
Microsoft Data Protection Manager (DPM)***  
DPM SC 2012R2               ✔  
DPM SC 2012 SP1               ✔  
DPM SC 2012               ✔  
DPM SC 2010               ✔  
Native OS or third-party utilities and commands that support file copy features****
Unix 
dd   ✔       ✔      
cp   ✔       ✔      
cpio   ✔       ✔      
tar   ✔       ✔      
pax   ✔       ✔      
dump   ✔       ✔      
rsync   ✔       ✔      
Windows
cp ✔       ✔        
scopy ✔       ✔        
xcopy ✔       ✔        
robocopy ✔       ✔        
Windows Explorer drag and drop ✔       ✔        

Footnotes

* For NetVault Backup v11.0 and v11.1, NetBackup v7.7 and v8.0, and CommVault Simpana v10 and v11 with NDMP: For NetApp C mode filers SVM-Scoped NDMP, backup is not supported. You need to use Node-Scoped NDMP backup.

The DR Rapid Air Gap solution has been implemented with NetVault 11.4.5 in DR Series system release 4.0.3.

Support for multi-initiators with NetVault 11.4.5 has been added for FC VTL in DR Series version 4.0.3.

** Requires DR Series system release 4.0.0274.0a or later for BE16 and NetBackup 8.0 support. With DR Series system release 4.0.3 it is possible to configure OST and VTL devices as Quest type. For Netbackup 8.0 to work with these devices, a mapping file needs to be installed. Contact Quest support for more details. Starting with BE 20, Quest OST and VTL devices are supported.

*** For Microsoft DPM: Only tape media of size 800 GB (LTO4) is supported. No other tape size should be used for backups. Refer to the Microsoft DPM best practices guide titled, Setting Up the DR Series System as a VTL Backup Target on Microsoft Data Protection Manager, on support.quest.com/DR-Series for more detailed information and for recommended tape and library drivers for iSCSI VTL.

**** Deduplication savings are based on the data backed up and the frequency of base and incremental backups.

NOTE: Supported Windows and Unix operating systems for the supported backup software versions can include:

  • Windows (2003, 2008, 2012, 2012 R2, 2016; 32-bit and 64-bit systems)
  • Unix (Linux RHEL 5.x, RHEL 6.x, RHEL 7.x, SUSE 10, SUSE 11, AIX 7.1, Solaris 10 x86; 32-bit and 64-bit systems)

Supported operating systems for iSCSI initiators

The following table lists the supported operating systems that are compatible with iSCSI VTL in the DR Series system.

Table 23: Supported OS - iSCI initiators
Operating System Version
Windows 2008 2008 R2 2012 2012 R2 2016
✔ ✔ ✔ ✔ ✔
RHEL 6.0 7.0      
✔ ✔      
CentOS 6.6        
✔        

Supported operating systems for FC initiators

The following table lists the supported operating systems that are compatible with Fibre Channel (FC) VTL in the DR Series system.

Table 24: Supported OS - fibre channel initiators
Operating System Version
Windows 2008 2008 R2 2012 2012 R2 2016
✔ ✔ ✔ ✔ ✔
RHEL 6.0 7.0      
✔ ✔      
CentOS 6.6        
✔        
Verwandte Dokumente

The document was helpful.

Bewertung auswählen

I easily found the information I needed.

Bewertung auswählen