Chat now with support
Chat mit Support

NetVault 12.4 - Installation Guide

Introduction Deploying NetVault Backup Reviewing pre-installation requirements Installing NetVault Backup Reviewing post-installation requirements Upgrading NetVault Backup Licensing NetVault Backup Removing NetVault Backup Troubleshooting

Installing NetVault Backup in unattended mode

The unattended mode is supported on all operating systems. When performing unattended installations, you can specify the installation options at the command line or in an option file.

An option file is a text file that provides answers to the questions that would be asked during the installation process. Each answer is stored as a value for a variable identified in the option file. You can save the option file in any directory and assign it any valid filename.

The installer uses the default values for options that are omitted (except for the password for PostgreSQL Database Superuser, which does not have a default value).

To install NetVault Backup Server or Client in unattended or silent mode:
1
Log on to the system with administrator or root-level access.
2
Start a command prompt window or terminal session, and navigate to the directory in which the installation file resides.
3
Type the following command:
Linux- and UNIX-based systems:
 
* 
NOTE: When installing NetVault Backup on Linux IA (Itanium), the installer shows ‘unaligned access’ warning messages. However, the installation completes successfully.

Example warning messages:

unaligned access to 0x6000000005642f7c, ip=0x2000000004dbe520

To suppress these warning messages, start the installer by running the following command:

prctl --unaligned=silent ./<Name of the installation file> --mode unattended <options>

— or —

prctl --unaligned=silent ./<Name of the installation file> --mode unattended --optionfile <filename>

./<Name of the installation file> --mode unattended <options>
— or —
./<Name of the installation file> --mode unattended --optionfile <filename>
Windows-based systems:
<Name of the installation file> --mode unattended <parameter list>
— or —
<Name of the installation file> --mode unattended --optionfile <filename>

You can specify the following parameters at the command line or in the option file.

 
* 
NOTE: To access help on the installation options, you can run the installer with the --help option:

On Linux and UNIX: ./<Name of the installation file> --help

On Windows: <Name of the installation file> --help

 
Table 4. Installation options
Option
Description

--unattendedmodeui <interaction level>

Specifies the interaction level for the unattended installation.

The allowed values are:

•
none: This is the default mode for unattended installations. In this mode, the installer does not display any prompts or progress information.
•
minimal: In this mode, the installer does not display any prompts, but it provides the progress information through pop-up windows.
•
minimalWithDialogs: In this mode, the installer displays some prompts, and it provides the progress information through pop-up windows.

--optionfile <filename>

Specifies the name of the option file. Provide the full path if the file does not reside in the current directory.

--installer-language <NetVault Backup language>

Specifies the language for your NetVault Backup installation. The supported languages are:

•
en: English
•
zh_CN: Simplified Chinese
•
fr: French
•
de: German
•
ja: Japanese
•
ko: Korean

The default is English (en).

--setup-type <setup-type>

Specifies the setup type for NetVault Backup Server. The setup type can be:

•
Standard: This is a default option and enables you to use the NetVault Backup Server in standalone mode.
•
MSP: This option enables you to use NetVault Backup Server and provide backup as a service to clients or customers. The Managed Service Provider (MSP) option is supported on the Windows and Linux Server pure 64-bit versions.

--prefix <installation directory>

Specifies the installation path for NetVault Backup. If the path contains spaces, enclose it in quotation marks (“ ”).

The default path is as follows:

•
On Linux: /usr/netvault
•
On Windows: “C:\Program Files\Quest\NetVault Backup” or “C:\Program Files (x86)\Quest\NetVault Backup”

--logical-name <NetVault Backup machine name>

Specifies the NetVault Backup machine name.

By default, NetVault Backup uses the OS-assigned machine name. For more information about machine names, see Determine NetVault Backup name and password.

--password <password>

Specifies the NetVault Backup machine password.

The machine password is used while adding a NetVault Backup Client to the server. The password can contain a maximum of 100 characters. It cannot contain the following characters:

\ and spaces

For more information about passwords, see Determine NetVault Backup name and password.

If no password is set during installation, NetVault Backup uses the system’s root or administrator password.

--db-dir <NetVault Database installation>

Specifies the installation path for NetVault Database. This parameter can only be specified for NetVault Backup Server installations.

If the path contains spaces, enclose it in quotation marks (“ ”).

The default path for NetVault Database is as follows:

•
On Linux: /usr/netvault/db
•
On Windows: “C:\Program Files\Quest\NetVault Backup\db” or “C:\Program Files (x86)\Quest\NetVault Backup\db”

--pg-linuxuser-option <pg-linuxuser-option>

Specifies the option for PostgreSQL Linux user account. For more information about NetVault Backup PostgreSQL Linux user account, see Determine NetVault Backup PostgreSQL Linux user account. The default option will be selected if you do not provide the input here.

Default: auto

Allowed: auto custom

--pg-linuxuser-name <pg-linuxuser-name>

Required only when --pg-linuxuser-option is set to custom.

Default: netvault-pgsql

--pg-su-passwd <password>

Specifies the password for PostgreSQL Database Superuser. This parameter can only be specified for NetVault Backup Server installations.

The password can contain a maximum of 100 characters. It cannot contain the following characters:

\ and spaces

For more information about specifying a password for the PostgreSQL database super user, see Determine NetVault Backup name and password.

 
* 
NOTE: When performing unattended installations, you can check the installer return code to verify whether the installation completed successfully. If the return code is zero (0), it implies that the installation is successful. A non-zero value indicates that the installation has failed. In such cases, you can examine the installation logs for details about the problem.
Examples

This section provides some examples of using the NetVault Backup installer in unattended mode.

Server installation
•
To perform an uninterrupted installation of NetVault Backup Server using default values for all options, use the following command:
Linux-based systems:
./<Name of the installation file> --mode unattended --pg-su-passwd MyDbPassword
Windows-based systems:
<Name of the installation file> --mode unattended --pg-su-passwd MyDbPassword
•
To specify a custom name and installation directory for a Windows-based NetVault Backup Server, use the following command:
<Name of the installation file> --mode unattended --prefix “D:\NetVault Backup” --logical‑name TestServer --pg-su-passwd MyDbPassword
•
To install the Japanese version of NetVault Backup Server on a Linux-based system, use the following command:
./<Name of the installation file> --mode unattended --installer-language ja
--pg-su-passwd MyDbPassword
•
To choose MSP as a setup type, use one of the following commands:
Linux-based systems:
./<Name of the installation file> --mode unattended --setup-type msp --pg-supasswd MyDbPassword
Windows-based systems:
<Name of the installation file> --mode unattended --setup-type msp --pg-supasswd MyDbPasswordClient installation
•
To perform an uninterrupted installation of NetVault Backup Client using default values for all options, use the following command:
Linux-based systems:
./<Name of the installation file> --mode unattended
Windows-based systems:
<Name of the installation file> --mode unattended
•
To specify a custom name and installation directory for a Windows-based NetVault Backup Client, use the following command:
<Name of the installation file> --mode unattended --prefix “D:\NetVault Backup” --logical‑name Client-A
•
To install the Japanese version of NetVault Backup Client on a Linux-based system, use the following command:
./<Name of the installation file> --mode unattended --installer-language ja
Sample option files

This section provides some sample option files.

Server installation
•
The following file specifies all options for installing the English version of NetVault Backup on a Linux‑based system:
prefix=/usr/NetVault Backup
logical-name=TestServer
password=MyPassword
db-dir=/usr/TstDir/Db
pg-su-passwd=MyDbPassword
•
The following file specifies a custom name and installation directory for a Windows-based NetVault Backup Server:
prefix=D:\NetVault Backup
logical-name=TestServer
db-dir=D:\TstDir\Db
pg-su-passwd=MyDbPassword
•
The following file specifies the options for installing the Japanese version of NetVault Backup Server on a Linux-based system:
installer-language=ja
pg-su-passwd=MyDbPassword
Client installation
•
The following file specifies all options for installing the English version of NetVault Backup Client on a Linux-based system:
prefix=/usr/NetVault Backup
logical-name=Client-A
password=MyPassword
•
The following file specifies a custom name and installation directory for a Windows-based NetVault Backup Client:
prefix=D:\NetVault Backup
logical-name=Client-A
•
The following file specifies the options for installing the Japanese version of NetVault Backup Client on a Linux-based system:
installer-language=ja

Installing NetVault Backup Client on Windows using Group Policy

This section includes the following topics:

•
Installing the software package using Group Policy
•
Upgrading the software package
•
Removing the software package
Installing the software package using Group Policy

In an Active Directory (AD) Domain, you can create a Group Policy Object (GPO) to install the NetVault Backup Client software on multiple machines in the domain.

To install NetVault Backup Clients using Group Policy Objects:
1
Step 1: Set up a Windows Domain:
a
Set up a machine as the Windows Domain Controller.
b
Add all the clients to the Domain.
For more information about setting up a Windows Domain, see the relevant Windows documentation.
2
Step 2: Copy the NetVault Backup installation file to a shared folder:
a
Log on to the Domain Controller as Administrator, and create a shared folder that is accessible to all machines in the domain.
a
Copy the installation file to the shared directory.
3
Step 3: Create a Group Policy Object:
a
Click Start, point to Administrative Tools, and then click Group Policy Management.
b
Right-click the domain, and click Create a GPO in this domain, and Link it here.
c
Type a name for the new policy (for example, NetVault Backup), and click OK.
d
In the left pane of the Group Policy Management Console, open the applicable nodes, and select the GPO. In the right-pane, go to the Security Filtering section.
e
By default, the policy is not applied to any client machines. To add a machine, click Add. In the dialog box that appears, click Object Types, and select Computers (if not already selected).
f
Select the machines on which you want to install NetVault Backup. Click OK.
4
Step 4: Assign the package:
a
In the Group Policy Management Console, select the policy, and click Edit. Under Computer Configuration, expand Software Settings.
b
Right-click Software installation, point to New, and then click Package. In the Open dialog box, type the full UNC path of the shared installer package (for example, \\<file server>\<share>\<installation file name>), and click Open.
 
* 
NOTE: Verify that you use the UNC path; do not use the Browse button to access the shared location.
c
In the Deploy Software dialog box, leave the Assigned option selected, and click OK.
The NetVault Backup installation package is now listed in the right-pane of the Group Policy Management Editor.
d
Close the Group Policy Management Editor and the Group Policy Management Console.
e
When you restart the machine, NetVault Backup is automatically installed on the selected clients.
Upgrading the software package
To upgrade the NetVault Backup software package:
1
Click Start, point to Administrative Tools, and then click Group Policy Management.
2
Select the Group Policy Object that you used to deploy the package, and then click Edit.
3
In the Group Policy Management Editor, expand Software Settings.
4
Open the Software installation node.
5
In the right-pane of the Group Policy Management Editor, right-click the entry for NetVault Backup, point to All Tasks, and then click Redeploy application.
6
In the confirmation dialog box, click Yes.
7
Close the Group Policy Management Editor and the Group Policy Management Console.
Removing the software package
To remove the assigned software package:
1
Click Start, point to Administrative Tools, and then click Group Policy Management.
2
Select the Group Policy Object that you used to deploy the package, and then click Edit.
3
In the Group Policy Management Editor, expand Software Settings.
4
Open the Software installation node.
5
In the right-pane of the Group Policy Management Editor, right-click the entry for NetVault Backup, point to All Tasks, and then click Remove.
6
Do one of the following:
•
Click Immediately uninstall the software from users and computers, and then click OK.
•
Click Allow users to continue to use the software but prevent new installations, and then click OK.
7
Close the Group Policy Management Editor and the Group Policy Management Console.

Reviewing post-installation requirements

•
Platform-specific post-installation requirements

Platform-specific post-installation requirements

This section covers the requirements for the following platforms:

•
Linux
•
RHEL 5.x
•
Solaris 10 (SPARC and x86-64)
•
Solaris 11 (SPARC and x86-64)
•
Ubuntu
•
Windows
•
Windows 2008 R2
Verwandte Dokumente

The document was helpful.

Bewertung auswählen

I easily found the information I needed.

Bewertung auswählen