立即与支持人员聊天
与支持团队交流

Rapid Recovery 6.9 - Commands and Scripting Reference Guide

Introduction to Rapid Recovery Command Line Management utility PowerShell module
Prerequisites for using PowerShell Working with commands and cmdlets Rapid Recovery PowerShell module cmdlets
Add-EsxAutoProtectObjects Add-EsxVirtualMachines Add-HyperVClusterSharedVirtualDisks Add-HyperVClusterVirtualMachines Add-HyperVVirtualMachines Disable-HyperVAutoProtection Edit-AzureVirtualStandby Edit-EsxiVirtualStandby Edit-HyperVVirtualStandby Edit-OracleDBVerifyNightlyJob Edit-OracleLogTruncationNightlyJob Edit-Replication Edit-ScheduledArchive Edit-VBVirtualStandby Edit-VMVirtualStandby Enable-HyperVAutoProtection Enable-OracleArchiveLogMode Get-ActiveJobs Get-CloudAccounts Get-Clusters Get-CompletedJobs Get-ExchangeMailStores Get-Failed Get-FailedJobs Get-HyperVClusterSharedVirtualDisks Get-ListAzureVMSizes Get-Mounts Get-OracleInstances Get-Passed Get-ProtectedServers Get-ProtectionGroups Get-QueuedJobs Get-RecoveryPoints Get-ReplicatedServers Get-Repositories Get-ScheduledArchives Get-SqlDatabases Get-TransferQueueEntries Get-UnprotectedVolumes Get-Version Get-VirtualizedServers Get-Volumes New-AzureVirtualStandby New-Base New-BootCD New-CloudAccount New-EncryptionKey New-EsxiVirtualStandby New-FileSearch New-HyperVVirtualStandby New-Mount New-Replication New-Repository New-ScheduledArchive New-Snapshot New-VBVirtualStandby New-VMVirtualStandby Push-Replication Push-Rollup Remove-Agent Remove-EsxAutoProtectObjects Remove-HyperVClusterSharedVirtualDisks Remove-HyperVClusterVirtualMachines Remove-HyperVVirtualMachines Remove-Mount Remove-Mounts Remove-RecoveryPoints Remove-RemoteMount Remove-RemoteMounts Remove-Replication Remove-Repository Remove-ScheduledArchive Remove-VirtualStandby Restart-CoreService Resume-Replication Resume-ScheduledArchive Resume-Snapshot Resume-VirtualStandby Set-AgentMetadataCredentials Set-DedupCacheConfiguration Set-License Set-OracleMetadataCredentials Set-ReplicationResponse Start-Archive Start-AttachabilityCheck Start-AzureDeploy Start-AzureExport Start-ChecksumCheck Start-ConsumeSeedDrive Start-CopySeedDrive Start-EsxiExport Start-HypervExport Start-LogTruncation Start-MountabilityCheck Start-OptimizationJob Start-OracleDBVerifyJob Start-OracleLogTruncationJob Start-Protect Start-ProtectCluster Start-ProtectEsxServer Start-ProtectHyperVCluster Start-ProtectHyperVServer Start-RepositoryCheck Start-RestoreAgent Start-RestoreArchive Start-ScheduledArchive Start-VBExport Start-VirtualStandby Start-VMExport Stop-ActiveJobs Stop-CoreService Suspend-Replication Suspend-ScheduledArchive Suspend-Scheduler Suspend-Snapshot Suspend-VirtualStandby Suspend-VMExport Update-Repository
Localization Qualifiers
Scripting

RestartCoreService

If the Core service on the Core machine is stopped, use the restartcoreservice command to start it again.

Usage

The usage for the command is as follows:

/restartcoreservice -core [host name] -user [user name] -password [password] -cancelactivejobs [true | false] -wait [time in seconds]

Command Options

The following table describes the options available for the restartcoreservice command:

Table 61: RestartCoreService command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-cancelactivejobs
Optional. Use this option to cancel all active jobs on the Core. The default setting is "false."
-wait
Optional. This option indicates that the command should wait until the Core service is fully restarted for the specified period of time in seconds before canceling active jobs.

Example:

Restart the Core service:

>cmdutil /restartcoreservice -core 10.10.127.42 -user admin -password 676df#df -cancelactivejobs true -wait 600

RestoreAgent

The restoreagent command lets you restore a protected machine or volume from a specific Rapid Recovery recovery point.

Usage

The usage for the command is as follows:

/restoreagent -protectedserver [name | IP address] -rpn [recovery point number] -volumes [IDs | names | all] -targetmachine [name] -targetvolume [volume name] -forcedismount -autorestart

Command Options

The following table describes the options available for the restoreagent command:

Table 62: RestoreAgent command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-protectedserver
The name or IP address of the server you want to restore.
-rpn
The identification number of the recovery point you want to use to restore the machine. To find the correct number, use the command /list rps.
-volumes
The IDs or names of the volumes you want to restore. To restore all protected volumes, use -volumes all.
-targetmacchine
The name of the machine to which you want to restore the protected machine.
-targetvolume
The name or ID of the volume to which you want to restore the machine.
-forcedismount
Optional. Use this option to force the dismount of the database on demand.
-autorestart
Optional. Use this command if restarting an Exchange Server machine is necessary.

Example:

Restore a machine to a protected machine with the IP address 192.168.20.130, including the force database dismount option:

>cmdutil /restoreagent -protectedserver 192.168.20.130 -rpn 259 -volumes "F:" "E:" "C:" -targetmachine 192.168.20.174 -targetvolume "E:" "G:" "F:" -forcedismount

RestoreArchive

This command restores an archive from a local archive or share and places the restored data in a specified repository.

Usage

The usage for the command is as follows:

/restorearchive -core [host name] -user [user name] -password [password] -all | -protectedserver [name | IP address] -repository [name] -archiveusername [name] -archivepassword [password] -path [location]

Command Options

The following table describes the options available for the restorearchive command:

Table 63: RestoreArchive command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-all
Restore data for all protected machines from the archive files.
-protectedserver
Protected machine with recovery points to restore. You can specify several machine names enclosed in double quotes and separated by spaces.
-repository
Name of a repository on the Core to which the restored recovery points should be placed. The name must be enclosed in double quotes.
-archiveusername
Optional. User name for the remote machine. Required for network path only.
-archivepassword
Optional. Password to the remote machine. Required for network path only.
-path
Location of the archived data to be restored; for example: d:\work\archive or network path \\servename\sharename.

Examples:

Restore archived data for all protected servers:

>cmdutil /restorearchive -core 10.10.10.10 -username administrator -password 23WE@#$sdd -all -repository repository1 -path d:\work\archive

Restore archived data for specific protected servers:

>cmdutil /restorearchive -core 10.10.10.10 -username administrator -password 23WE@#$sdd -protectedserver “10.10.20.30” “20.10.10.5” -repository repository1 -path d:\work\archive

RestoreUrc

The restoreurc command lets you restore a protected machine or volume from a specific Rapid Recovery recovery point to a bare-metal machine using the Universal Recovery Console (URC).

Usage

The usage for the command is as follows:

/restoreurc -protectedserver [name | IP address] -rpn [recovery point number] -volumes [IDs | names | all] -targetmachine [IP address] -urcpassword [password from the URC] -targetdisk [disk number | all]

Command Options

The following table describes the options available for the restoreurc command:

Table 64: RestoreUrc command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-protectedserver
The name or IP address of the server you want to which you want to restore the URC.
-rpn
The identification number of the recovery point you want to use to restore the machine. To find the correct number, use the command /list rps.
-volumes
The IDs or names of the volumes you want to restore. To restore all protected volumes, use -volumes all.
-targetmacchine
The name of the machine to which you want to restore the protected machine.
-urcpassword
The authentication key from the URC.
-targetdisk
The numbers of the disks on which you want to restore the machine. To select all disks from the machine using the URC, use -targetdisk all.

Example:

Restore a machine to disks 0 and 1 of the machine using the URC, when the IP address for the URC machine is 192.168.20.175:

>cmdutil /restoreurc -protectedserver 192.168.20.130 -rpn 259 -volumes "C:" "E:" -targetmachine 192.168.20.175 -urcpassword ******** -targetdisk 0 1
相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级