RestoreArchive
This command restores an archive from a local archive or share and places the restored data in a specified repository.
Usage
The usage for the command is as follows:
/restorearchive -core [host name] -user [user name] -password [password] -all | -protectedserver [name | IP address] -repository [name] -archiveusername [name] -archivepassword [password] -path [location]
Command Options
The following table describes the options available for the restorearchive
command:
Table 61: RestoreArchive command options
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
-all |
Restore data for all protected machines from the archive files. |
-protectedserver |
Protected machine with recovery points to restore. You can specify several machine names enclosed in double quotes and separated by spaces. |
-repository |
Name of a repository on the Core to which the restored recovery points should be placed. The name must be enclosed in double quotes. |
-archiveusername |
Optional. User name for the remote machine. Required for network path only. |
-archivepassword |
Optional. Password to the remote machine. Required for network path only. |
-path |
Location of the archived data to be restored; for example: d:\work\archive or network path \\servename\sharename. |
Examples:
Restore archived data for all protected servers:
>cmdutil /restorearchive -core 10.10.10.10 -username administrator -password 23WE@#$sdd -all -repository repository1 -path d:\work\archive
Restore archived data for specific protected servers:
>cmdutil /restorearchive -core 10.10.10.10 -username administrator -password 23WE@#$sdd -protectedserver “10.10.20.30” “20.10.10.5” -repository repository1 -path d:\work\archive
RestoreUrc
The restoreurc
command lets you restore a protected machine or volume from a specific Rapid Recovery recovery point to a bare-metal machine using the Universal Recovery Console (URC).
Usage
The usage for the command is as follows:
/restoreurc -protectedserver [name | IP address] -rpn [recovery point number] -volumes [IDs | names | all] -targetmachine [IP address] -urcpassword [password from the URC] -targetdisk [disk number | all]
Command Options
The following table describes the options available for the restoreurc
command:
Table 62: RestoreUrc command options
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
-protectedserver |
The name or IP address of the server you want to which you want to restore the URC. |
-rpn |
The identification number of the recovery point you want to use to restore the machine. To find the correct number, use the command /list rps . |
-volumes |
The IDs or names of the volumes you want to restore. To restore all protected volumes, use -volumes all . |
-targetmacchine |
The name of the machine to which you want to restore the protected machine. |
-urcpassword |
The authentication key from the URC. |
-targetdisk |
The numbers of the disks on which you want to restore the machine. To select all disks from the machine using the URC, use -targetdisk all . |
Example:
Restore a machine to disks 0 and 1 of the machine using the URC, when the IP address for the URC machine is 192.168.20.175:
>cmdutil /restoreurc -protectedserver 192.168.20.130 -rpn 259 -volumes "C:" "E:" -targetmachine 192.168.20.175 -urcpassword ******** -targetdisk 0 1
Resume
The administrator can use this command to resume snapshots, export to a virtual machine, and replicate. You must specify your need to resume by a parameter. The following parameters are valid: snapshot
, vmexport
, and replication
. See Pause for more details.
Usage
The usage for the command is as follows:
/resume [snapshot | vmexport | replication] -core [host name] -user [user name] -password [password] -all | -protectedserver [name | IP address] -incoming [host name] | outgoing [host name] -time [time string]
Command Options
The following table describes the options available for the resume
command:
Table 63: Resume command options
-? |
Display this help message. |
-restore |
[snapshots ], [replication ] or [vmexport ]. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
-all |
Resume all agents on the selected Core. |
-protectedserver |
Resume current protected server. |
-incoming |
Host name of the remote core that replicates to the core machine. |
-outgoing |
Host name of the remote target core to which data is replicated. |
Examples:
Resume snapshots for specific protected server:
>cmdutil /resume snapshot -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.10.4
Resume export to a virtual machine for all protected machines on the core:
>cmdutil /resume vmexport –core 10.10.10.10 -user administrator -password 23WE@#$sdd -all
Resume outgoing replication on the core for a specific protected machine:
>cmdutil /resume replication -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.1.76
Resume outgoing replication for all protected machines on the target core:
>cmdutil /resume replication -core 10.10.10.10 -user administrator -password 23WE@#$sdd -outgoing 10.10.1.63
Resume incoming replication for all machines on the target core:
>cmdutil /resume replication -core 10.10.10.10 -user administrator -password 23WE@#$sdd -incoming 10.10.1.82
ResumeScheduler
This command lets you resume the task scheduler it has been paused.
Usage
The usage for the command is as follows:
/resumescheduler -core [host name] -user [user name] -password [password]
Command Options
The following table describes the options available for the resumescheduler
command:
Table 64: ResumeScheduler command options
-? |
Display this help message. |
-restore |
[snapshots ], [replication ] or [vmexport ]. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
Example:
Resume snapshots for specific protected server:
>cmdutil /resumescheduler -core 10.10.127.42 -user admin -password 676df#df