立即与支持人员聊天
与支持团队交流

NetVault Plug-in for NDMP 11.4.5 - Application Notes for Mirapoint Message Server

Installation and configuration prerequisites

Installation prerequisites

In addition to the prerequisites covered in the Quest NetVault Backup Plug‑in for NDMP User’s Guide, verify that the software requirements and supported filer operating systems requires are met. For more information, see the Quest NetVault Backup Compatibility Guide available at: https://support.quest.com/technical-documents.

NOTE: The installation and configuration procedures are described in the Quest NetVault Backup Plug‑in for NDMP User’s Guide.

Configuration prerequisites

In addition to the prerequisites covered in the Quest NetVault Backup Plug‑in for NDMP User’s Guide, verify that the following requirements are met:

Set the NDMP dma parameter to bakbone by typing the following command at the prompt:
To use a backup device locally attached to the Mirapoint Server, set the NDMP LogProtocol parameter to off by typing the following command at the prompt:
Create a user with Backup Operator privileges and use this user account when adding the NDMP Server or reconfiguring the plug-in authentication details.

Additional steps for servers with locally attached devices

When adding a Mirapoint Message Server, the NDMP Server window is displayed again after you complete the process for adding an NDMP Server outlined in the Quest NetVault Backup Plug‑in for NDMP User’s Guide.

This window displays an additional field, Arm(s), that lets you configure the robotic arm locally attached to the filer. For Mirapoint Message Servers with locally attached arms, type the complete file path to the device file for the robotic arm.

 

相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级