Tests network performance between a client and server using a designated port (use this command at the same time you use the other --iperf command).
network --iperf_client --server acme-sw-02 --port 5001 --window_size 7KB --interval 30 --time 60
----------------------------------------------------------- Client connecting to acme-sw-02, TCP port 5001 TCP window size: 14.0 KByte (WARNING: requested 7.00 KByte) ----------------------------------------------------------- [ 6] local 10.20.21.23 port 5812 connected with 10.20.20.3 port 5001 [ ID] Interval Transfer Bandwidth [ 6] 0.0-30.0 sec 193 MBytes 54.0 Mbits/sec [ 6] 30.0-60.0 sec 205 MBytes 57.4 Mbits/sec [ 6] 0.0-60.0 sec 398 MBytes 55.7 Mbits/sec
Tests network performance between a client and server using a designated port (use this command at the same time you use the other --iperf command).
----------------------------------------------------------- Server listening on TCP port 5001 TCP window size: 14.0 KByte (WARNING: requested 7.00 KByte) ----------------------------------------------------------- [ 7] local 10.20.21.23 port 5812 connected with 10.20.20.3 port 5001 [ ID] Interval Transfer Bandwidth [ 7] 0.0-60.0 sec 398 MBytes 55.7 Mbits/sec
network --show [--bondif <bond0,bond1,...,bondN>]
[--nwif <eth0,eth1,...,ethN>]
[--hosts]
[--routes]
[--interface <bondN|ethN>]
network --delete [--bondif <bond0,bond1,...,bondN>]
[--member <eth0,eth1,...,ethN>]
[--nwif <eth0,eth1,...,ethN>]
network --restart
network --setdhcp [--bondif <bondN>]
[--nwif <ethN>]
network --setstatic_ip [--bondif <bondN>]
[--nwif <ethN>]
--ip <IPv4/IPv6 address>
--netmask <netmask>
[--gateway <IPv4/IPv6 address>]
network --create_bond --bondif <bondN>
[--dhcp]
[--static]
--nwif <eth0,eth1,...,ethN>
[--mode < ALB | 802.3ad >]
[--name < DNS name >]
[--mtu <Supported MTU range 512 - 9000>]
[--ip <IPv4/IPv6 address>]
[--netmask <netmask>]
[--gateway <IPv4/IPv6 address>]
[--restart]
network --create_eth --nwif <ethN>
[--dhcp]
[--static]
[--name < DNS name >]
[--mtu <Supported MTU range 512 - 9000>]
[--ip <IPv4/IPv6 address>]
[--netmask <netmask>]
[--restart]
network --add_member --bondif <bondN>
--nwif <eth0,eth1,...,ethN>
network --setdns [--suffix <dns suffix>]
[--primary <IPv4/IPv6 address>]
[--secondary <IPv4/IPv6 address>]
network --setbonding [--bondif <bondN>]
[--mode < ALB | 802.3ad >]
[--mtu <Supported MTU range 512 - 9000>]
network --update [--bondif <bondN>]
[--nwif <ethN>]
[--mode < ALB | 802.3ad >]
[--name < DNS name >]
[--mtu <Supported MTU range 512 - 9000>]
network --factory_reset [--auto_bonding_speed <1G|10G>]
network --host [--add] [--ip <IPv4/IPv6 address>] [--name <host name>]
[--delete] [--ip <IPv4/IPv6 address>] [--name <host name>]
network --route [--add] [--network <destination networks>] [--netmask <netmask>] [--gateway <gateway addresses>] [--interface <bondN|ethN>]
[--delete] [--network <destination networks>] [--netmask <netmask>] [--gateway <gateway addresses>] [--interface <bondN|ethN>]
network --nslookup --destination <ip address | hostname>
network --traceroute --destination <ip address | hostname>
[--interface <bondN|ethN>]
network --ping --destination <ip address | hostname>
[--tries <number>]
[--size <number>]
[--interface <bondN|ethN>]
network --blink --nwif <ethN>
network --enable [--bondif <bond0,bond1,...,bondN>]
[--nwif <eth0,eth1,...,ethN>]
network --disable [--bondif <bond0,bond1,...,bondN>]
[--nwif <eth0,eth1,...,ethN>]
network --troubleshoot [--links]
[--gateway]
[--ntp]
[--dns]
[--active_domain]
[--nis]
[--clients]
[--port_mapper]
[--network_config]
[--show_active <NFS|CIFS|OST|RDS>]
[--interface <bondN|ethN>]
network --tcpdump [--port <NFS|Windows|Replication|OST|RDA>]
[--pkt_size <128 - 32768>]
[--file_size <0 - 100>]
[--stop]
[--host <ip address list>]
[--interface <bondN|ethN>]
network --iperf_client --server <ip address | hostname>
[--port <number>]
[--window_size <num bytes [KB/MB]>]
[--interval <num seconds>]
[--time <num seconds>]
network --iperf_server [--port <number>]
[--window_size <num bytes [KB/MB]>]
network --help
network <command> <command-arguments>
<command> can be one of:
--show Display network settings.
--delete Delete network interfaces(s).
--restart Restarts networking.
--setdhcp Configures bond interface to use DHCP.
--setstatic_ip Assigns a static IP address to the bond interface.
--create_bond Create bond interfaces for the machine.
--create_eth Create eth interfaces for the machine.
--add_member Add an interface to an existing bond.
--setdns Configures the Domain Name Servers.
--setbonding Updates bonding mode or MTU information.
--update Updates bonding and individual interface information.
--factory_reset Reset networking to factory configuration.
--host Manage local hosts.
--route Manage local routes.
--nslookup Looks up the IP address/hostname.
--traceroute Displays the packets route to network host.
--ping Sends ICMP ECHO_REQUEST to destination host.
--blink Blink LED on the specific ethernet device.
--enable Start the specific ethernet device(s) on restart.
--disable Don't start the specific ethernet device(s) on restart.
--troubleshoot Troubleshoots network issues.
--tcpdump Capture network traffic.
--iperf_client Run iperf (Network Performance) in client mode.
--iperf_server Run iperf (Network Performance) in server mode.
For command-specific help, please type network --help <command>
eg:
network --help show
© ALL RIGHTS RESERVED. 使用条款 隐私 Cookie Preference Center