Chat now with support
Chat with Support

Unified Communications Analytics 8.7 - Deployment Guide

Prerequisites for your installation Installing UC Analytics Configuring UC Analytics Adding data sources for Active Directory or Azure Active Directory Adding data sources, chargeback costs, and thresholds for Exchange and Exchange Online
Permissions needed to collect Exchange on-premises or hybrid data Permissions needed to collect from native Exchange Online Creating an Exchange Configuration data source Creating an Exchange Tracking Logs data source Creating an Exchange Mailbox Contents data source Do I need both Exchange Tracking Logs and Exchange Mailbox Contents collections? Creating an Exchange IIS Logs data source Creating an Exchange Mailbox Content Summary data source Creating an Exchange Calendar data source Creating an Exchange Public Folders data source Adding Exchange Online hybrid data sources for hybrid Office 365 Adding Exchange Online data sources for native Office 365 Setting chargeback costs for Exchange Setting thresholds for Exchange metrics Omitting words when filtering by subject or body
Adding data sources, chargeback costs, and thresholds for Skype for Business/Lync Adding data sources, chargeback, and thresholds for Cisco Managing which insights can seen by users Configuring and managing subscriptions Making changes to your deployment Appendix A:Configuring Exchange and Office 365 Appendix B:Configuring the Skype for Business or Lync Server Appendix C:Configuring IIS Log Files to capture ActiveSync or OWA events Appendix D:PowerShell cmdlets used by data sources Appendix E:Backup and recovery options Appendix F:Custom configurations Appendix G: Questions and answers about UC Analytics

Setting thresholds for Skype for Business/Lync metrics

You can set thresholds for Skype for Business/Lync Quality of Experience (QoE) metrics, using different colors to show good calls or the severity of poor calls. When you set a threshold, you set the color that displays when the number is over or under a specified value. When you view a QoE insight, if a value shown in a table meets the set threshold, a colored underline appears below the value.

By default, the Thresholds Classification page lists key Lync QoE thresholds that can be set. You can also add thresholds for the conference and session metrics that are displayed in the Skype for Business/Lync insights. You can use color to identify minimum and maximum values that you want to track.

1
Click Classifications and click Thresholds.
6
To add another threshold, click Add threshold and specify the value, units of measure, and color.

The default metrics that display on the Thresholds Classifications page are preset with the recommended thresholds for Skype for Business 2015/2019 and for Lync 2013. Many of them also apply to Lync 2010. To add recommended thresholds that apply only to Lync 2010, you can add a threshold classification for the specific quality metric. For more information, see Adding new threshold classifications

The following table provides basic information about the quality metrics thresholds that are displayed by default:

% of application sharing content lost

The percentage of the content from the sharer that did not reach the viewer. Content can be discarded (or spoiled) when the sharer discards tiles from the graphics source or when the ASMCU tiles discards tiles from sharer respectively.

Available for Microsoft Lync Server 2013 and later only.

% of call with high video CPU load

Percentage of the call where the client experienced high CPU load when processing video (dynamic capability flag was active).

Available for Microsoft Lync Server 2013 and later only.

% of call with low video frame rate

The percentage of the call that is below the low frame rate threshold.

Available for Microsoft Lync Server 2013 and later only.

% of local video frames lost

The percentage of the total video frames that are lost.

Average % of packets lost

Packet loss (%) represents the percentage of packets that did not make it to their destination.

Packet loss will cause the audio to be distorted or missing (on the receiver end).

Average % of samples concealed

Average ratio of concealed samples generated by audio healing to typical samples.

Average % of video packets lost with error correction

The packet loss rate after forward error correction (FEC) has been applied.

Available for Microsoft Lync Server 2013 and later only.

Average application sharing RDP latency

Average processing time for remote desktop protocol (RDP) tiles over the duration of the viewing session. A higher total equates to a longer delay in the viewing experience.

Available for Microsoft Lync Server 2013 and later only.

Average jitter

Jitter (ms) measures the variability of packet delay and results in a distorted or choppy audio experience.

Jitter can increase latency on networks.

Generally, jitter metrics can be qualified as follows:

Average network MOS degradation

Network Average Mean Opinion Score (MOS) is the key measurement used to gauge the perceived audio quality (based on an algorithm that calculates how a typical user would rate the voice quality).

This metric shows the amount the Network MOS was reduced because of jitter and packet loss.

It is an integer rating from 0 to 5.

Average relative endpoint latency

Average amount of one-way latency between the two media end points involved in the application sharing. This is a single-hop latency measure. Relative one-way latency measures the delay between the client and the server.

Available for Microsoft Lync Server 2013 and later only.S

Average round trip latency

Network Round Trip Time (RTT) is the most common measure of latency and is measured in ms.

This measure is the average round trip time for RTP packets between endpoints.

When latency is high, users will likely hear the words, but there will be delays.

For RTP packets as reported in the monitoring reports:

Average video frame rate

The average video frame rate sent (outbound) during the call and the average video frame rate received (inbound) during the call. (frames/s)

Average video frame rate used

Average frames per second received for all video streams and computed over the duration of the session. This metric is reported for video streams when available. (frames/s)

Adding new threshold classifications

In addition to the default threshold metrics, you can set thresholds for additional metrics. You can add threshold classifications for more QoE metrics or for conference and peer-to-peer session metrics.

1
Click Classifications and click Thresholds.
2
Click Add classification.
7
To add another threshold for the metric, click Add threshold and specify the value, units of measure, and color.

You can add threshold classifications for the quality metrics that are specific only to Lync 2010.

Average estimated bandwidth

The available bandwidth estimated on the client-side. Absolute thresholds are not useful, but when the client detects bandwidth is low (< 100 kbps) audio quality can easily be affected by other applications or network congestion.

In Lync 2010 only.

Average Listen MOS

The average predicted wideband listening MOS score for audio received from and sent to the network including speech level, noise level, codec, network conditions and capture device characteristics.

Mean Opinion Score (MOS) is the gold standard measurement to gauge the perceived audio quality (an algorithm calculates how a typical user would rate the voice quality).

In Lync 2010 only.

In addition to adding the specific Lync 2010 recommended metric thresholds, you can add threshold classifications for a wide range of numeric values that are reported in the Skype for Business/Lync insights.

The following table lists the additional thresholds that you can add and set.

QoE media session

QoE session

QoE stream

Conference participant

Conference

Peer-to-peer session

Peer-to-peer session participant

Conferencing policy

Adding data sources, chargeback, and thresholds for Cisco

Permissions needed to collect Cisco data

Cisco is supported only if Active Directory is present and Cisco end-users are synchronized to Active Directory users using the SAM account name.

To collect data from Cisco, you add different data sources to gather information. You can create the following data sources:

Cisco Configuration: end-user data from the Cisco Unified Communications Manager (CUCM) and user data from Active Directory using LDAP
Cisco CDR Logs: Peer-to-peer session and conference details from the Cisco CDR (call detail records) log files.
Related Documents

The document was helpful.

Select Rating

I easily found the information I needed.

Select Rating