external help file: QuestSoftware.RecoveryManager.AD.PowerShellFE.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShellFE
online version:
Sets recovery mode for the current recovery project
Set-RMADFERecoveryMode [-RecoveryMode] <RecoveryMode> [[-ExcludingDomains] <String[]>]
[-InformationAction <ActionPreference>] [-InformationVariable <String>] [<CommonParameters>]
This cmdlet changes the recovery mode of the recovery project.
@{paragraph=PS C:\>}
PS C:\> Set-RMADFERecoveryMode -RecoveryMode SYSVOLRecovery
Sets up SYSVOL recovery mode on the recovery project
@{paragraph=PS C:\>}
PS C:\> Set-RMADFERecoveryMode -RecoveryMode DomainRecovery -ExcludingDomains @("domain1", "domain2")
Sets up Domain recovery mode on the recovery project and exclude "domain1" and "domain2" from recovering.
Specifies recovery mode which can accept one of the following values:
1.
ForestRecovery - complete forest recovery mode
2.
DomainRecovery - recover selected domains only
3.
SYSVOLRecovery - recover SYSVOL only
4.
Repromotion - recover domain controllers that were not recovered in previous recovery sessions
Type: RecoveryMode
Parameter Sets: (All)
Aliases:
Required: True
Position: 0
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies domains that must not be recovered when DomainRecovery mode selected.
Type: String[]
Parameter Sets: (All)
Aliases:
Required: False
Position: 1
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
@{Text=}
Type: ActionPreference
Parameter Sets: (All)
Aliases: infa
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
@{Text=}
Type: String
Parameter Sets: (All)
Aliases: iv
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
external help file: QuestSoftware.RecoveryManager.AD.PowerShellFE.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShellFE
online version:
Applies settings to the verification schedule for the RMADFE project.
Set-RMADFESchedule [[-Schedules] <Schedule[]>] [-Credential] <PSCredential> [[-NewCredential] <PSCredential>]
[[-IsEnabled] <Boolean>] [-InformationAction <ActionPreference>] [-InformationVariable <String>]
[<CommonParameters>]
This cmdlet applies settings to the verification schedule for the current RMADFE project.
@{paragraph=PS C:\>}
PS C:\> $schedule = New-RMADFESchedule -Once -StartDate "2/20/2008 1:00"
$credential = Get-Credential
Set-RMADFESchedule -Schedules $schedule -Credential $credential -IsEnabled $true
Set a one-time schedule for the current project.
Schedule is enabled and will run under the specified user account.
Specifies schedules for project verification.
Type: Schedule[]
Parameter Sets: (All)
Aliases:
Required: False
Position: 0
Default value: None
Accept pipeline input: True (ByValue)
Accept wildcard characters: False
Specifies credentials that will be used to run the command.
Type: PSCredential
Parameter Sets: (All)
Aliases:
Required: True
Position: 1
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Credential to change an account to.
If a new credential is specified, the Credential parameter should contain the previous account credential for a task.
Type: PSCredential
Parameter Sets: (All)
Aliases:
Required: False
Position: 2
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies whether the schedule is enabled.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: 3
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
@{Text=}
Type: ActionPreference
Parameter Sets: (All)
Aliases: infa
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
@{Text=}
Type: String
Parameter Sets: (All)
Aliases: iv
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
external help file: QuestSoftware.RecoveryManager.AD.PowerShell.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShell
online version:
Sets global application settings
Set-RMADGlobalOptions [-EmailServer <String>] [-EmailSender <String>] [-ExtendedLogging <Boolean>]
[-Properties <Hashtable>] [-IgnoreReadOnly] [-InformationAction <ActionPreference>]
[-InformationVariable <String>] [-WhatIf] [-Confirm] [<CommonParameters>]
Sets Recovery Manager global application settings
PS C:\> {{ Add example code here }}
{{ Add example description here }}
Specifies the SMTP server for e-mail notifications
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the sender field of e-mail notifications
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies diagnostic logs
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Allows you to modify the application settings.
To specify the properties you want to modify, use an associative array or hash table.
For more information, see the Windows PowerShell help topic on associative arrays (hash tables).
To open the topic, at the PoweShell command prompt enter the following:
help about_associative_arrayBelow are the properties you can modify by using this parameter.
The properties are grouped by the names of tabs in the "Computer Collection Properties" dialog box, because each property corresponds to an option on these tabs.To assign a new value to a property, use the following format: PropertyName=Value E-MAIL TAB
Type: Hashtable
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Allows you to perform the action in a console currently performing full replication.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Describes what would happen if you executed the command without actually executing the command.
Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Prompts for a confirmation before executing the command.
Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
@{Text=}
Type: ActionPreference
Parameter Sets: (All)
Aliases: infa
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
@{Text=}
Type: String
Parameter Sets: (All)
Aliases: iv
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
external help file: QuestSoftware.RecoveryManager.AD.PowerShell.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShell
online version:
Sets replication properties of consoles in the replication console list.
Set-RMADReplicationConsole [-AccessCredential <PSCredential>] [-Enabled <Boolean>]
[-FallbackCredential <PSCredential>] [-Id] <Int32[]> [-InformationAction <ActionPreference>]
[-InformationVariable <String>] [<CommonParameters>]
Set-RMADReplicationConsole [-AccessCredential <PSCredential>] [-Enabled <Boolean>]
[-FallbackCredential <PSCredential>] [-ComputerName] <String[]> [-InformationAction <ActionPreference>]
[-InformationVariable <String>] [<CommonParameters>]
Set-RMADReplicationConsole [-AccessCredential <PSCredential>] [-Enabled <Boolean>]
[-FallbackCredential <PSCredential>] [-InputObject] <ReplicationConsole[]>
[-InformationAction <ActionPreference>] [-InformationVariable <String>] [<CommonParameters>]
Updates user credentials for connecting to a specified computer, and enables/disables the manual and scheduled replication for the console.
PS C:\> C:\>$credential = Get-Credential
C:\>Set-RMADReplicationConsole -ComputerName Hostname1 -AccessCredential $credential -Enabled $true
This command changes the credentials for accessing the console on Hostname1, and enables the replication for the console.
PS C:\> C:\>Set-RMADReplicationConsole -Id 1 -AccessCredential $credential -Enabled $true
This command changes the credentials for accessing the console with specified ID, and enables the replication for the console.
PS C:\> C:\>Set-RMADReplicationConsole -ComputerName Hostname1 -FallbackCredential $([System.Management.Automation.PSCredential]::Empty)
This command removes the fallback account for the console on Hostname1.
Specifies the user credentials to read data from the target computer.
The user must be a local Administrator on the target computer.
To obtain the user credentials, create a PSCredential object using the Get-Credential cmdlet provided by Windows PowerShell.
If you need to use the credentials of the currently logged in user, specify [System.Management.Automation.PSCredential]::Empty value for this parameter.
Type: PSCredential
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Set replication item enabled.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Supplies a fallback account for replacing the account that is used by the backup schedule task.
The account must have administrator privileges on the system(s) to be backed up.
If you need to reset the fallback account, specify [System.Management.Automation.PSCredential]::Empty value for this parameter.
You can use this parameter only when Full mode is set for the console.
Type: PSCredential
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the ID of the replication console.
Type: Int32[]
Parameter Sets: Id
Aliases:
Required: True
Position: 0
Default value: None
Accept pipeline input: True (ByPropertyName, ByValue)
Accept wildcard characters: False
Specifies the hostname of the replication console.
Type: String[]
Parameter Sets: ComputerName
Aliases:
Required: True
Position: 0
Default value: None
Accept pipeline input: True (ByPropertyName, ByValue)
Accept wildcard characters: False
Specifies the replication console object you want to update.
Type: ReplicationConsole[]
Parameter Sets: InputObject
Aliases:
Required: True
Position: 0
Default value: None
Accept pipeline input: True (ByValue)
Accept wildcard characters: False
@{Text=}
Type: ActionPreference
Parameter Sets: (All)
Aliases: infa
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
@{Text=}
Type: String
Parameter Sets: (All)
Aliases: iv
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
© ALL RIGHTS RESERVED. 이용 약관 개인정보 보호정책 Cookie Preference Center