DismountRemote
Use the dismountremote
command to dismount a mounted recovery point mounted from a remote location.
Usage
The usage for the command is as follows:
/dismountremote -core [host name] -user [user name] -password [password] [-all | -protectedserver [name | IP address] | -protectedserver [name | IP address] -path [location]
Command Options
The following table describes the options available for the dismountremote
command:
Table 18: DismountRemote command options
-? |
Display this help message. |
-core |
Optional. Remote core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
-all |
Dismount all mounted recovery points. |
-protectedserver |
Dismount all mounted recovery points for current agent. |
-path |
Dismount selected mount point. |
Example:
Dismount a remotely mounted recovery point by a specific path:
>cmdutil /dismountremote -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver "11.11.11.11" -path "C:\ProgramData\AppRecovery\MountPoints\LMU_DESKTOP-IA8FI3J-2022-03-21T142354\F__\"
Dismount all remotely mounted recovery points for specified protected server:
>cmdutil /dismountremote -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver "11.11.11.11"
Dismount all remotely mounted recovery points for all protected servers:
>cmdutil /dismountremote -core 10.10.10.10 -user administrator -password 23WE@#$sdd -all
EditEsxServer
You can use the editesxserver
command whenever you want to make changes to the number of VMware ESX(i) virtual machines that you want to protect agentlessly.
Usage
The usage for the command is as follows:
/editEsxServer -core [host name] -user [user name] -password [password] -protectedserver [name | IP address] -add | -remove -virtualMachines [virtual machines collection | all] -autoprotect [object ID or name collection]
Command Options
The following table describes the options available for the editesxserver
command:
Table 19: EditEsxServer command options
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
-repository |
Required. The name of the repository that is associated with the Core that you want to use to protect the virtual machine.
Note: You must enclose the name in double quotes. |
-protectedserver |
Use this option to edit vCenter and ESX(i) objects for a specific protected machine. |
-add |
Use this option to add a specified vCenter or ESXi object. |
-remove |
Use this option to remove a specified vCenter or ESXi object. |
-virtualmachines |
Optional. This option lets you list the virtual machines that you want to protect. |
-autoprotect |
Optional. This option lets you list the new virtual machines that you want to automatically protect. |
Examples:
Automatically protect specific vCenter or ESXi objects of a vCenter or ESXi server with the Core:
>cmdutil /editEsxServer -protectedserver 10.10.8.150 -add -autoprotect "Folder1" "Folder2"
EditHyperVCluster
You can use the edithypervcluster
command whenever you want to add or remove a Hyper-V cluster or virtual machine using agentless protection.
Usage
The usage for the command is as follows:
/edithypervcluster -core [host name] -user [user name] -password [password] -protectedserver [name | IP address] -add | -remove -virtualMachines [virtual machines collection | all] -shareddisks [name/path collection | all]
Command Options
The following table describes the options available for the edithypervcluster
command:
Table 20: EditHyperVCluster command options
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
-repository |
Required. The name of the repository that is associated with the Core that you want to use to protect the virtual machine.
![](/ko-kr/technical-documents/image/20cb2681-10aa-4bbc-bace-ac616f40425c)
|
NOTE: You must enclose the name in double quotes. | |
-protectedserver |
The name of the protected cluster from which you want to add or remove virtual machines or shared virtual disks. |
-add |
Use this option to add virtual machines or shared virtual disks under protection. |
-remove |
Use this option to remove a virtual machine or shared virtual disks from protection. |
-virtualmachines |
Optional. This option lets you list the clusters or virtual machines that you want to protect. Separate the names by spaces and enclose the names of virtual machines in double quotes. |
-deleterecoverypoints |
Optional. This option can only be used with the "-remove" parameter. Use it to delete all recovery points for specified virtual machines. |
-shareddisks |
Optional. List the shared virtual disks that you want to protect or remove, separated by spaces. The name of the shared virtual disk must be enclosed double quotes. |
Example:
Protect a specific Hyper-V cluster with the Core:
>cmdutil /edithypervcluster -protectedserver 10.10.8.150 -add -shareddisks C:\SharedDisks\Folder1
EditHyperVServer
You can use the edithypervserver
command whenever you want to add or remove a Hyper-V server using agentless protection.
Usage
The usage for the command is as follows:
/edithypervserver -core [host name] -user [user name] -password [password] -protectedserver [name | IP address] -add | -remove -virtualmachines [virtual machines collection | all]
Command Options
The following table describes the options available for the edithypervserver
command:
Table 21: EditHyperVServer command options
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
-repository |
Required. The name of the repository that is associated with the Core that you want to use to protect the virtual machine.
Note: You must enclose the name in double quotes. |
-protectedserver |
Use this option to specify Hyper-V objects for a specific protected machine. |
-add |
Use this option to add specific Hyper-V objects under protection. |
-remove |
Use this option to remove specific Hyper-V objects from protection. |
-virtualmachines |
Optional. This option lets you list the virtual machines that you want to protect. Separate the names by spaces and enclose the names of virtual machines in double quotes. |
Example:
Protect all of the virtual machines for a specific Hyper-V server:
>cmdutil /edithypervserver -protectedserver 10.10.8.150 -add -virtualmachines all