지금 지원 담당자와 채팅
지원 담당자와 채팅

Rapid Recovery 6.7 - Commands and Scripting Reference Guide

Introduction to Rapid Recovery Command Line Management utility PowerShell module
Prerequisites for using PowerShell Working with commands and cmdlets Rapid Recovery PowerShell module cmdlets
Add-EsxAutoProtectObjects Add-EsxVirtualMachines Add-HyperVClusterSharedVirtualDisks Add-HyperVClusterVirtualMachines Add-HyperVVirtualMachines Disable-HyperVAutoProtection Edit-AzureVirtualStandby Edit-EsxiVirtualStandby Edit-HyperVVirtualStandby Edit-OracleDBVerifyNightlyJob Edit-OracleLogTruncationNightlyJob Edit-Replication Edit-ScheduledArchive Edit-VBVirtualStandby Edit-VMVirtualStandby Enable-HyperVAutoProtection Enable-OracleArchiveLogMode Get-ActiveJobs Get-CloudAccounts Get-Clusters Get-CompletedJobs Get-ExchangeMailStores Get-Failed Get-FailedJobs Get-HyperVClusterSharedVirtualDisks Get-ListAzureVMSizes Get-Mounts Get-OracleInstances Get-Passed Get-ProtectedServers Get-ProtectionGroups Get-QueuedJobs Get-RecoveryPoints Get-ReplicatedServers Get-Repositories Get-ScheduledArchives Get-SqlDatabases Get-TransferQueueEntries Get-UnprotectedVolumes Get-Version Get-VirtualizedServers Get-Volumes New-AzureVirtualStandby New-Base New-BootCD New-CloudAccount New-EncryptionKey New-EsxiVirtualStandby New-FileSearch New-HyperVVirtualStandby New-Mount New-Replication New-Repository New-ScheduledArchive New-Snapshot New-VBVirtualStandby New-VMVirtualStandby Push-Replication Push-Rollup Remove-Agent Remove-EsxAutoProtectObjects Remove-HyperVClusterSharedVirtualDisks Remove-HyperVClusterVirtualMachines Remove-HyperVVirtualMachines Remove-Mount Remove-Mounts Remove-RecoveryPoints Remove-RemoteMount Remove-RemoteMounts Remove-Replication Remove-Repository Remove-ScheduledArchive Remove-VirtualStandby Restart-CoreService Resume-Replication Resume-ScheduledArchive Resume-Snapshot Resume-VirtualStandby Set-AgentMetadataCredentials Set-DedupCacheConfiguration Set-License Set-OracleMetadataCredentials Set-ReplicationResponse Start-Archive Start-AttachabilityCheck Start-AzureDeploy Start-AzureExport Start-ChecksumCheck Start-ConsumeSeedDrive Start-CopySeedDrive Start-EsxiExport Start-HypervExport Start-LogTruncation Start-MountabilityCheck Start-OptimizationJob Start-OracleDBVerifyJob Start-OracleLogTruncationJob Start-Protect Start-ProtectCluster Start-ProtectEsxServer Start-ProtectHyperVCluster Start-ProtectHyperVServer Start-RepositoryCheck Start-RestoreAgent Start-RestoreArchive Start-ScheduledArchive Start-VBExport Start-VirtualStandby Start-VMExport Stop-ActiveJobs Stop-CoreService Suspend-Replication Suspend-ScheduledArchive Suspend-Scheduler Suspend-Snapshot Suspend-VirtualStandby Suspend-VMExport Update-Repository
Localization Qualifiers
Scripting

ForceMount

Use the forcemount command to conduct an one-time recovery point mountability check. This determines whether or not the specified recovery point or recovery points can be mounted and used to restore backed up data. You must list either one or more specific recovery points on which to conduct the check, or a time range during which the recovery points were created.

Usage

The usage for the command is as follows:

/forcemount -core [host name] -user [user name] -password [password] -protectedserver [name | IP address] -rpn [number | numbers] | -time [time string]

Command Options

The following table describes the options available for the forcemount command:

Table 30: ForceMount command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-protectedserver
Protected machine against which to perform a mountability check.
-rpn
The sequential number of a recovery point against which to perform checks (run command /list rps to obtain the numbers). To perform checks against multiple recovery points with a single command, you can specify several numbers separated by spaces.
-time
Select a recovery point by its creation time. You must specify the exact time in the format “mm/dd/yyyy hh:mm tt” (for example, “2/24/2012 09:00 AM”). Keep in mind to specify the date and time values of the time zone set on your PC.

Example:

Perform mountability checks for recovery points with numbers 5 and 7:

>cmdutil /forcemount -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.20.20 -rpn 5 7

ForceOptimizationJob

The forceoptimizationjob command lets you perform optimize a repository on demand.

Usage

The usage for the command is as follows:

/forceoptimizationjob -repository [repository name] | -all -core [host name] -user [user name] -password [password]

Command Options

The following table describes the options available for the forceoptimizationjob command:

Table 31: ForceOptimizationJob command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-repository
The name of the repository that you want to optimize.
-all
Use this option to perform the optimization job on all repositories for this Core.

Example:

Force a repository optimization job:

>cmdutil /forceoptimizationjob -repository "Repository 1" -core 10.10.10.10 -user administrator -password 23WE@#$sdd

ForceReplication

Use the forcereplication command to force a one-time transfer of replicated data from the source core to the target core. You can replicate one specific protected server or replicate all protected servers. The protected servers must be already configured for replication.

Usage

The usage for the command is as follows:

/[forcereplication |frep] -core [host name] -user [user name] -password [password] -targetcore [host name] -all | -protectedserver [name | IP address]

Command Options

The following table describes the options available for the forcereplication command:

Table 32: ForceReplication command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used
-targetcore
Host name of the target core against which replication should be forced.
-protectedserver
The protected machine you want to replicate.
-all
Force replication for all machines being replicated to the target core.

Example:

Force replication for a protected server on a specific target core:

>cmdutil /forcereplication -target core 10.10.10.10 -protectedserver 10.20.30.40

ForceRollup

Use the forcerollup command to force the rollup of recovery points on a protected machine.

Usage

The usage for the command is as follows:

/[forcerollup | fro] -core [host name] -user [user name] -password [password] -protectedserver [name | IP address]

Command Options

The following table describes the options available for the forcerollup command:

Table 33: ForceRollup command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used
-protectedserver
Optional. Protected machine against which to perform rollup.

Example:

Force rollup for agent 10.10.10.1 on the Core:

>cmdutil /forcerollup -core 10.10.10.10 - user administrator -password 23WE@#$sdd -protectedserver 10.10.10.1
관련 문서

The document was helpful.

평가 결과 선택

I easily found the information I needed.

평가 결과 선택