Rapid Recovery 6.5 - User Guide

Scheduling replication

1. On the target Core, open the Rapid Recovery Core Console, and from the icon bar, click (Replication).
   The Replication page appears.
2. In the Outgoing Replication pane, on the Core for which you want schedule replication, click (More options) and then select Schedule.

   The Replication Schedule for [CoreName] dialog box opens.

3. Select from one of the following options:
   • At All Times. Replicates after every new snapshot, checksum check, and attachability check, and after the nightly jobs complete.
   • Daily (Start replication only during the specified time period). Begins replicating only within the time range provided.
     1. In the From text box, enter the earliest time at which replication should begin.
     2. In the To text box, enter the latest time at which replication should begin.
        

        NOTE: If replication is in progress when the scheduled time ends, the replication job completes after the allotted time period.

   • Custom. Begins replicating only within the time range provided, letting you set one time range for weekdays and another time range for weekends.
     1. Next to Weekdays, in the From text box, enter the earliest time at which replication should occur on a weekday; and then in the To text box, enter the latest time at which replication should occur on a weekday.
     2. Next to Weekends, in the From text box, enter the earliest time at which replication should occur on weekends; and then in the To text box, enter the latest time at which replication should occur on weekends.
4. Click Save.

   The schedule is applied to all replication to the selected target Core.

Using the Copy function to create a seed drive

1. On the source Core, open the Rapid Recovery Core Console, and from the icon bar, click (Replication).
   The Replication page appears.
2. On the Replication page, in the Outgoing Replication pane, click to expand the Core that protects the machine for which you want to create a seed drive.
   The selection expands to show each protected machine in the specified Core.
3. Click in the first row of the table to select each machine for which you want to create a seed drive.
4. In the menu under the Outgoing Replication pane, click Copy.
   The Replication Wizard appears.
5. On the Seed Drive Location page of the wizard, use the Location drop-down list to select from the following destination types:
   • Local
   • Network
   • Cloud
6. Enter the details for the seed drive archive, as described in the following table, based on the location type you selected in the preceding step.

   Table 95: Archive details

   Option	Text Box	Description
   Local	Output location	Enter the location for the output. It is used to define the location path where you want the archive to reside; for example, D:\work\archive.
   Network	Output location	Enter the location for the output. It is used to define the location path where you want the archive to reside; for example, \\servername\sharename.
   	User Name	Enter a user name. It is used to establish logon credentials for the network share.
   	Password	Enter a password for the network path. It is used to establish logon credentials for the network share.
   Cloud	Account	Select an account from the drop-down list. NOTE: To select a cloud account, you must first have added it in the Core Console. For more information, see Adding a cloud account.
   	Container	Select a container associated with your account from the drop-down menu.
   	Folder Name	Enter a name for the folder in which the archived data is to be saved. The default name is Rapid-Recovery-Archive-[DATE CREATED]-[TIME CREATED]

7. Click Next.
8. On the Seed Drive Options page, enter the information as described in the following table.

   Table 96: Seed drive options

   Item	Description
   Maximum Size	Large archives of data can be divided into multiple segments. Select the maximum amount of space you want to reserve for creating the seed drive by doing one of the following: Select Entire Target to reserve all available space in the path provided on the Seed Drive Location page (for example, if the location is D:\work\archive, all of the available space on the D: drive is reserved). Select the blank text box, enter an amount, and then select a unit of measurement from the drop-down list to customize the maximum space you want to reserve.
   Recycle action	In the event the path already contains a seed drive, select one of the following options: Do not reuse. Does not overwrite or clear any existing seed data from the location. If the location is not empty, the seed drive write will fail. Replace this Core. Overwrites any pre-existing seed data pertaining to this Core but leaves the data for other Core s intact. Erase completely. Clears all seed data from the directory before writing the seed drive.
   Comment	Enter a comment that describes the seed drive.
   Add all Agents to Seed Drive	Select this option to replicate all protected machines on the source Core using the seed drive. This option is selected by default.
   Build recovery point chains (fix orphans)	Select this option to replicate the entire recovery point chain to the seed drive. This option is selected by default. NOTE: Typical seeding in Rapid Recovery 5.4.x replicated only the latest recovery point to the seed drive, which reduced the amount of time and space required for creating the seed drive. Opting to build recovery point chains to the seed drive requires enough space on the seed drive to store the latest recovery points from the specified protected machines, and may take additional time to complete the task.

9. Do one of the following:
   • If you cleared the Add all Agents to Seed Drive check box, click Next.
   • If you selected Add all Agents to Seed Drive, go to step 10.

   If you selected Add all Agents to Seed Drive, go to step 10.
10. On the Protected Machines page of the wizard, select the protected machines for which you want to create a seed drive.
11. Click Finish.

Monitoring replication

1. On the source Core, open the Rapid Recovery Core Console, and from the icon bar, click (Replication).
   The Replication page appears.
2. On this page, you can view information about and monitor the status of replication tasks as described in the following table.

   Table 97: Replication tasks

   Section	Description	Available Actions
   Seed Drives (#)	After you specify the use of a seed drive when defining replication, until you abandon or consume it, a Seed Drives (#) link appears on the Outgoing Replication pane on the source Core. The number displayed indicates how many seed drives are pending. NOTE: This link does not appear unless a seed drive is pending. Click this link to list seed drives that have been written but not yet consumed by the target Core. Further expand the collapsible menu to show information about outstanding seed drives, including the target Core and the date range of the recovery points included in the seed drive.	In the drop-down menu, click Abandon to abandon or cancel the seed process.
   Outgoing Replication	Lists all target Cores to which the source Core is replicating. It includes a state indicator, the target Core name, the number of machines being replicated, and the progress of a replication transmission.	On a source Core, from the (More) drop-down menu, you can select the following options: Details. Lists the ID, URL, display name, state, customer ID, email address, and comments for the replicated Core. Change Settings. Lists the display name and lets you edit the host and port for the target Core. Schedule. Lets you set a customized schedule for replication to this target Core. Add Machines. Lets you select a host from a drop-down list, select protected machines for replication, and create a seed drive for the new protected machine’s initial transfer. You can optionally choose to include recovery points for machines already added to replication. Delete. Lets you delete the replication relationship between source and target Cores. Doing so ceases all replication to this Core.
   Incoming Replication	Lists all source machines from which the target receives replicated data. It includes the remote Core name, state, machines, and progress. Lists all source Cores from which the target receives replicated data. The display name for the source Cores listed are populated from the value in the Replication Wizard when defining replication. It includes a state indicator, the remote Core name, and the progress of a replication transmission.	On a target Core, from the (More) drop-down menu, you can select the following options: Details. Lists the ID, host name, customer ID, email address, and comments for the replicated Core. Consume. Consumes the initial data from the seed drive and saves it to the local repository. Delete. Lets you delete the replication relationship between target and source Cores. Doing so ceases all replication from this Core.
   Pending Replication Requests	This information applies to managed service providers only. When a customer clicks he Requests link in the Incoming Replication pane, a summary table section appears listing the customer ID, email address, and host name for the request.	In the drop-down menu, click Ignore to ignore or reject the request, or Review to review the pending request.

Pausing and resuming replication

1. Open the Rapid Recovery Core Console, and from the icon bar, click (Replication).
   The Replication page appears.
2. To pause replication for all replicated machines, do the following:
   1. Click the checkbox at the top of the summary table to select the source or target Core.
   2. Click Pause from the menu preceding the summary table.
      Replication for all protected machines in the selected Core is paused.
3. To pause replication for only certain machines, do the following:
   1. Click the arrow to the right of any Core.
      The view expands to show each of the protected machines from the selected Core that are being replicated.
   2. Click in the first column to select each machine for which you want to pause replication. Click any selection again to clear the checkbox for machines you do not want to pause.
   3. Click Pause from the menu preceding the summary table.
      Replication for the selected protected machines is paused.
4. To resume replication for all replicated machines, do the following:
   1. Click the checkbox at the top of the summary table to select the source or target Core.
   2. Click Resume from the menu at the top of the summary table.
      Replication for all protected machines in the selected Core is resumed.
5. To resume replication for only certain machines, do the following:
   1. Click the arrow to the right of any Core.
      The view expands to show each of the protected machines from the selected Core that are being replicated.
   2. Click in the first column to select each machine for which you want to resume replication. Click any selection again to clear the checkbox for machines you do not want to resume.
   3. Click Resume from the menu at the top of the summary table.
      Replication for the selected protected machines is resumed.