The following is a list of issues, including those attributed to third-party products, known to exist at the time of release.
Table 2. Known issues To perform backups to a virtual tape library, you must set the Device Block Size to 256K. For instructions configuring this setting, see the chapter on Managing Storage Devices in the Dell NetVault Backup Administrator’s Guide. The backup option Delete Snapshot on Exit (SMTAPE_DELETE_SNAPSHOT) is only supported on ONTAP versions 6.5 P5 and later, 6.5 H2 and later, and 6.5 R2 and later. If a filer reboots or there is a loss of network connectivity with the filer while the plug-in is running, the filer-attached drive goes offline with the message “Command Failed, Re-initializing Driver” when the plug-in tries to access the drive after the NAS Device is brought back online. After a few minutes, the drive recovers and becomes online, but you must perform a manual check before using the drive.
1 In the Navigation pane, click Manage Devices, and then in the list of devices, click the applicable drive or the corresponding Manage Device icon.
2 On the Tape Drive Management page, click Check. When a job starts child jobs, the user logged on to NetVault Backup when creating the parent job remains the owner of the parent job, but the child jobs are owned by the default user. This issue can affect NetVault Backup Reports, Job Status page, and other functionality that depend on job ownership.
Before installing Plug‑in for SnapMirror to Tape 10.0.5, ensure that your system meets the following minimum hardware and software requirements.
Table 3. System requirements For complete supported platform information, see the Dell NetVault Backup Compatibility Guide available at .
• Select the correct installation package on Linux: Starting with 10.0, NetVault Backup offers separate client-only and server-only installation packages for Linux-based systems. Both the server and the client packages are available in hybrid and pure 64-bit versions:
• Hybrid server and client packages: The hybrid packages (LinuxX86HybridServer and LinuxX86Hybrid) are intended for Linux users who do not have a pure 64-bit-only requirement.These packages let you upgrade from pure 32-bit as well as hybrid installations of NetVault Backup. The hybrid packages retain binary compatibility with all previous versions of 32-bit and 64-bit plug-ins. These packages also work on 32-bit systems that do not have 64-bit capability.
• Pure 64-bit server and client packages: The pure 64-bit packages (LinuxX86Pure64Server and LinuxX86Pure64) packages are intended for pure 64-bit Linux distributions. If you have a specific reason that you cannot use any 32-bit components (for example, you are using a Linux distribution that does not run 32-bit code), use these packages.The pure 64-bit packages cannot be used to upgrade existing pure 32-bit or hybrid NetVault Backup installations. You must remove the existing pure 32-bit or hybrid version and install the pure 64-bit version separately. To reduce confusion, warning messages have been added to both the upgrade and installation packages to ensure that you understand that they are not compatible.Depending on your OS type, verify that you select the correct installation package to install the NetVault Backup Server or Client software:
• LinuxX86HybridServer: Use this package to install or upgrade NetVault Backup Server on 32- or 64-bit Linux systems.
• LinuxX86Hybrid: Use this package to install or upgrade NetVault Backup Client on 32- or 64-bit Linux systems.
• LinuxX86Pure64Server: Use this package to install or upgrade NetVault Backup Server on pure 64-bit Linux systems.
• LinuxX86Pure64: Use this package to install or upgrade NetVault Backup Client on pure 64-bit Linux systems.
Table 4. Pure64 builds
NOTE: X = Compatible
To obtain the license key for your NetVault Backup Server environment, you must first provide the NetVault Machine ID of your main NetVault Backup Server along with the machine IDs of clients running any licensed plug‑in.You can use the NetVault Configuration Wizard to install the product license keys. Alternatively, you can install the license keys from the Manage Clients page.
1 Start the NetVault WebUI, and in the Navigation pane, click Manage Clients.
2 In the NetVault Backup Clients list, select the client, and click Manage.
3 On the View Clients page, note the machine ID exactly as it appears in the Client Summary table.
1 In the Navigation pane, click Guided Configuration, and then on the NetVault Configuration Wizard page, click Install Licenses.
2 In the NetVault Backup Clients list, select the client on which you want to install the license key, and click Next.
3 In the Enter the license key string box, type or copy and paste the license key, and click Apply.
1 In the Navigation pane, click Manage Clients.
2 In the NetVault Backup Clients list, select the client on which you want to install the license key, and click Manage.
3 On the View Clients page, click Install License.
4 In the Install License dialog box, type or copy and paste the license key, and click Apply.
© 2020 Quest Software Inc. ALL RIGHTS RESERVED. Feedback 이용 약관 개인정보 보호정책