The following is a list of issues known to exist at the time of this release.
Note: Check the release notes for each cartridge you will be using for known and late-breaking issues with that cartridge.
The timeframe selector has a new and modern implementation. It has the following limitations compared to the previous implementation:
Foglight for Automation is not supported:
See below for details. These limitations will be addressed in a future release.
When a Foglight Management Server running in High Availability mode fails over, all in-progress tasks fail and the system cannot recover them.
The Foglight Cartridge for Automation should not be installed, and workflow automation must not be used, on a Foglight Federation Master. This is because active tasks that update topology objects are not permitted on the Federation Master. Workflow automation may be installed and used on the Federated Child(ren) as usual.
Defect ID |
Known Issue |
FOG-3615 | Notification emails body prefix formatting may show as one big line instead of separated lines. Workaround: add dot "." at the end of each line you add to the email body prefix |
FOG-3589 | In the Notification Channel dashboard, on the "Alarms" tab an "Error occur" message is displayed sometimes. Workaround: Move to another domain in the same alarm template. |
WCF-15913 |
Custom rules (which are copied from existing cartridge rules) will drop some tables or charts that exist in the original Alarm dialog. Contact Quest Support for workaround. |
FGL-20162 |
Running Foglight 5.9.5 on Windows Server 2008 requires upgrading PowerShell to version 3.0. |
FGL-19877 |
Upgrading to version 5.9.3 completes successfully but the installation log contains shortcut creation failures. |
FGL-19479 |
The Management Server UI will possibly be displayed abnormally if Tomcat version is upgraded. Workaround: Clear the cache data of your web browser. |
FGL-19431 |
If you toggled enable/disable state for Alarm Integration, Incident Integration, Clear Integration Alarm, or QMX Agent Host Connection Rule rule in the Integration cartridge, its enable/disable state will be reset after upgrading to 5.9.x from 5.7.5.8. |
FGL-19283 |
When upgrading the Management Server from 5.7.5.8 to 5.9.x, unexpected CartridgeDeploymentException shows in the log file. Workaround: This exception only occurs in environments with those cartridges which define Java Archive or JBoss Artifacts component, like Integration and IntelliProfile cartridges. JBoss Server has been removed from the Management Server 5.9.x. As a result, JBossDeploymentHandler, which was used to handle above components, has also been removed from the Management Server 5.9.2 or later. If you encounter this issue, you could ignore it as this exception does not impact upgrade of the Management Server and relevant cartridges. |
FGL-18953 |
EU appliances may fail connecting the Foglight Management Server after the initial installation of Foglight Management Server. |
FGL-18611 |
LDAP accounts may fail binding to the OU group whose name includes backslash characters '\'. This can prevent Foglight to authenticate LDAP users. |
FGL-18470 |
FSMService availability calculations do not work as expected in a service hierarchy. |
FGL-18125 |
FoglightShutdownAction.checkInUsedPort() does not load port settings from server.config during an upgrade. |
FGL-18122 |
In a Windows Single-Sign ON (SSO) with untrusted multiple domains, only the user with the keytab file-corresponding group can be imported. |
FGL-18076 |
The Management Server data-driven multiple severity rules may fire multiple times for the same severity in case of concurrent data submissions. |
FGL-18075 |
The rule engine may pass non-persisted alarm IDs to rule actions. This can prevent some alarms, that are generated multiple times against the same scoping object, from firing. |
FGL-18034 |
PostgreSQL fails to start up while installing the Management Server with an embedded PostgreSQL database on a Korean OS. |
FGL-17845 |
Failing to start the Management Server with the --host=*.*.*.* option due to a failed attempt to start the embedded database. |
FGL-17826 |
LDAP users may have to log in twice to get proper role assignments. |
FGL-17769 |
Foglight is configured with a list of default ciphers. Some of these ciphers are potentially vulnerable ciphers. A review of the ciphers that will be available in a future release is ongoing. Workaround: Edit the list of ciphers by completing the following steps:
For complete information, visit http://tomcat.apache.org/tomcat-7.0-doc/config/http.html. |
FGL-17768 |
The Management Server distribution layout contains some confusing directories under server/jboss. |
FGL-17415 |
ObservationQueryPlan$QueryStep.getDayIndex(...) can result in ArrayIndexOutOfBoundsExceptions during a Daylight Savings Time (DST) change. |
FGL-17162 |
Core monitoring policy derivations are not deployed on a Federated Master. |
FGL-17055 |
Excluded objects are sometimes included in a Federation topology synchronization. |
FGL-17015 |
A Foglight Agent Manager that is no longer in use maintains a stale disconnected RemoteObject instance under the host object. This causes the host to appear as undefined on the Hosts dashboard, even though the host is monitored by Foglight for Infrastructure. |
FGL-16508 |
When federation.config does not contain any queries, TopologySynchService mistakenly logs the following warning: WARN Obsolete federated topology object purge will not be performed because the following federated servers are not connected: ... |
FGL-16487 |
Topology loading can fail for topology objects that have been converted to DataObjects. |
FGL-16439 |
Type-based exclusions in federation.config do not apply to referenced objects. |
FGL-16432 |
String observations containing reserved characters in script agents are not supported. |
FGL-16388 |
The alarm email notification code does not persist any information about notification alarms that were previously sent. If the server is restarted, all alarms appear as new, and the notifications are resent. |
FGL-16166 |
Hibernate/JDBC errors occurring while loading rules return an empty list. |
FGL-16163 |
Cleared credential alarms are found when querying for alarms that are not cleared. |
FGL-4498 |
Simple rules that report alarms directly are not affected by blackouts. |
FXM-880 |
Diagnose link doesn't work on the Master FMS. |
Defect ID |
Known Issue |
FADUI-1149 |
An attempt to import external groups results in the following error: Could not execute the requested operation, error(s) had occurred: Failed to retrieve groups, please make sure you correctly configured the Directory Services, check log for details. The log, however, does not contain any errors. |
FGLUI-11228 |
After changing the value of the registry value, some of the performance calendars may disappear from the list. |
FGLUI-11009 |
When editing properties from the Agent Status dashboard or the Agent Properties dashboard in Chrome 17, some edit fields are not available. |
FGLUI-10834 |
The Cartridge Inventory page is currently unable to alert users if a cartridge install fails due to lack of space in the server's temp directory. An error is written to the log files. |
FGLUI-10788 |
When editing secondary agent property tables from either the Agent Status or Agent Properties dashboards, performing Add and Delete operations at the same time results in all Added items being deleted. |
FGLUI-10504 |
Selecting the time range "All" on the Service Details dashboard can result in the page getting stuck refreshing. Avoid using the "All" time range on this page. |
FGLUI-10456 |
Selections made on the Service Selector tab of the Select services and tiers to monitor dialog box of the SOC become unselected when you switch to the Tier Selector tab and back again. |
FGLUI-10323 |
The first time the Environment Report is run it may generate a warning: "com.quest.wcf.core.component.RenderPDFContext - Text ... did not fit. in view ..." |
FGLUI-10036 |
Credential alarm messages sometimes contain UUIDs for objects related to the alarm. |
FGLUI-8261 |
When using a Federation Master that is a newer version than the Federated Child, it is possible to get warnings about missing metrics. This occurs when new metrics have been added to the Federation Master's version. The warnings indicate that the Federated Child does not provide these metrics, and they will cease when the Federated Child is upgraded to the same version as the Federation Master. |
FGLUI-7817 |
When editing secondary agent property lists, the Delete Selected Row(s) button marks the rows to be deleted by graying them out. Save changes must be selected to delete the selected rows. If a required field is blank, then a value must be entered before the row can be marked for deletion. |
FGLUI-7729 |
In the Service Builder and Service Operation Console (SOC) dashboards, when alarm filters are configured, they are applied to the main dashboards (Service Builder and SOC dashboards) and to some first level popups only. The alarm filters are not applied throughout all popups/drilldowns at any level. |
FGLUI-7593 |
When reviewing Alarms on a Federation Master, you are able to open a link to view the rule that fired the alarm on the Federated Child. This involves opening the console of the Federated Child. If the Federated Child is of an older version than the Federation Master, an error page is displayed. |
FGLUI-7377 |
Under rare conditions, if the session is allowed to expire while viewing some of the views in the Administration dashboard, the process of logging in again displays the Administration view without any decoration around the side panels. Workaround: To clear this condition, close the browser. Do not save your session if the browser prompts you to save the last session configuration. Instead, start the browser and log in again. |
FGLUI-7356 |
The column layout on the Agent Status Page does not allow resizing of columns, which can result in the host name appearing truncated. |
FGLUI-7333 |
An error message stating "Error getting value of context entry with key:timeRange" can appear in the logs when using the popup menu on the Origin field of the Alarm Details dialog. |
FGLUI-6874 |
If a Federation Master Server connects an older version Federated Child, the Federated Child may have some of the objects that are no longer associated with the Management Server Performance Report and Foglight Server Diagnostic views on the Federation Master. This results in some data about the Federated Child being unavailable to this report and views. |
FGLUI-5990 |
Inconsistency in the number of alerts shown in the "All Alarms Chart" and "Alarm List with Filter" in the Alarms dashboard. |
FGLUI-5708 |
Display all available scoping objects in the condition editor for copied and user-created rules. |
FGLUI-4628 |
On systems with a large numbers of hosts, the Host Table view can be slow to display. |
FGLUI-4544 |
Foglight 4 Tabular views generate an error when the time range has "Auto" granularity. |
FGLUI-3509 |
The edit rule definition for an alarm from a Federated Child brings up a page for editing a rule on the Federation Master, rather than for the rule that triggered the alarm. This occurs because it is not possible to perform administration from the Federation Master. |
FGLUI-3440 |
When the user pastes data using right-click > Paste to a box that automatically updates itself (for example, the edit agent properties screen), the user interface does not automatically refresh itself. |
FGLUI-3430 |
When agent activation fails, the "Activating" status box does not show the status of the failed start agent. |
FGLUI-1906 |
The Service Levels Details page does not show cleared alarms for Service Level Policy. |
FGLUI-257 |
Seconds should be displayed in the startTime and endTime in the WCF under Browse > Data when granularity is set to "raw". |
WCF-13385 |
QP5 needs to be upgraded to the latest version. |
WCF-12581 |
In Internet Explorer 8, when the number of dashboard nodes in the navigation panel exceeds the maximum that can be displayed without a scrollbar, the scrollbar does not immediately appear. |
WCF-10580 |
Tree Table list nodes should not be clickable or dwellable. |
WCF-7344 |
PDF charts and files that were requested through a proxy fail and result in a Connection Refused error. Note that this error only applies to requests made by the Management Server. |
WCF-5895 |
Vertical scrollbar not shown for the text area. |
The following is a list of issues known to exist at the time of this release.
Note: Check the release notes for each cartridge you will be using for known and late-breaking issues with that cartridge.
The timeframe selector has a new and modern implementation. It has the following limitations compared to the previous implementation:
Foglight for Automation is not supported:
See below for details. These limitations will be addressed in a future release.
When a Foglight Management Server running in High Availability mode fails over, all in-progress tasks fail and the system cannot recover them.
The Foglight Cartridge for Automation should not be installed, and workflow automation must not be used, on a Foglight Federation Master. This is because active tasks that update topology objects are not permitted on the Federation Master. Workflow automation may be installed and used on the Federated Child(ren) as usual.
Defect ID |
Known Issue |
FOG-3615 | Notification emails body prefix formatting may show as one big line instead of separated lines. Workaround: add dot "." at the end of each line you add to the email body prefix |
FOG-3589 | In the Notification Channel dashboard, on the "Alarms" tab an "Error occur" message is displayed sometimes. Workaround: Move to another domain in the same alarm template. |
WCF-15913 |
Custom rules (which are copied from existing cartridge rules) will drop some tables or charts that exist in the original Alarm dialog. Contact Quest Support for workaround. |
FGL-20162 |
Running Foglight 5.9.5 on Windows Server 2008 requires upgrading PowerShell to version 3.0. |
FGL-19877 |
Upgrading to version 5.9.3 completes successfully but the installation log contains shortcut creation failures. |
FGL-19479 |
The Management Server UI will possibly be displayed abnormally if Tomcat version is upgraded. Workaround: Clear the cache data of your web browser. |
FGL-19431 |
If you toggled enable/disable state for Alarm Integration, Incident Integration, Clear Integration Alarm, or QMX Agent Host Connection Rule rule in the Integration cartridge, its enable/disable state will be reset after upgrading to 5.9.x from 5.7.5.8. |
FGL-19283 |
When upgrading the Management Server from 5.7.5.8 to 5.9.x, unexpected CartridgeDeploymentException shows in the log file. Workaround: This exception only occurs in environments with those cartridges which define Java Archive or JBoss Artifacts component, like Integration and IntelliProfile cartridges. JBoss Server has been removed from the Management Server 5.9.x. As a result, JBossDeploymentHandler, which was used to handle above components, has also been removed from the Management Server 5.9.2 or later. If you encounter this issue, you could ignore it as this exception does not impact upgrade of the Management Server and relevant cartridges. |
FGL-18953 |
EU appliances may fail connecting the Foglight Management Server after the initial installation of Foglight Management Server. |
FGL-18611 |
LDAP accounts may fail binding to the OU group whose name includes backslash characters '\'. This can prevent Foglight to authenticate LDAP users. |
FGL-18470 |
FSMService availability calculations do not work as expected in a service hierarchy. |
FGL-18125 |
FoglightShutdownAction.checkInUsedPort() does not load port settings from server.config during an upgrade. |
FGL-18122 |
In a Windows Single-Sign ON (SSO) with untrusted multiple domains, only the user with the keytab file-corresponding group can be imported. |
FGL-18076 |
The Management Server data-driven multiple severity rules may fire multiple times for the same severity in case of concurrent data submissions. |
FGL-18075 |
The rule engine may pass non-persisted alarm IDs to rule actions. This can prevent some alarms, that are generated multiple times against the same scoping object, from firing. |
FGL-18034 |
PostgreSQL fails to start up while installing the Management Server with an embedded PostgreSQL database on a Korean OS. |
FGL-17845 |
Failing to start the Management Server with the --host=*.*.*.* option due to a failed attempt to start the embedded database. |
FGL-17826 |
LDAP users may have to log in twice to get proper role assignments. |
FGL-17769 |
Foglight is configured with a list of default ciphers. Some of these ciphers are potentially vulnerable ciphers. A review of the ciphers that will be available in a future release is ongoing. Workaround: Edit the list of ciphers by completing the following steps:
For complete information, visit http://tomcat.apache.org/tomcat-7.0-doc/config/http.html. |
FGL-17768 |
The Management Server distribution layout contains some confusing directories under server/jboss. |
FGL-17415 |
ObservationQueryPlan$QueryStep.getDayIndex(...) can result in ArrayIndexOutOfBoundsExceptions during a Daylight Savings Time (DST) change. |
FGL-17162 |
Core monitoring policy derivations are not deployed on a Federated Master. |
FGL-17055 |
Excluded objects are sometimes included in a Federation topology synchronization. |
FGL-17015 |
A Foglight Agent Manager that is no longer in use maintains a stale disconnected RemoteObject instance under the host object. This causes the host to appear as undefined on the Hosts dashboard, even though the host is monitored by Foglight for Infrastructure. |
FGL-16508 |
When federation.config does not contain any queries, TopologySynchService mistakenly logs the following warning: WARN Obsolete federated topology object purge will not be performed because the following federated servers are not connected: ... |
FGL-16487 |
Topology loading can fail for topology objects that have been converted to DataObjects. |
FGL-16439 |
Type-based exclusions in federation.config do not apply to referenced objects. |
FGL-16432 |
String observations containing reserved characters in script agents are not supported. |
FGL-16388 |
The alarm email notification code does not persist any information about notification alarms that were previously sent. If the server is restarted, all alarms appear as new, and the notifications are resent. |
FGL-16166 |
Hibernate/JDBC errors occurring while loading rules return an empty list. |
FGL-16163 |
Cleared credential alarms are found when querying for alarms that are not cleared. |
FGL-4498 |
Simple rules that report alarms directly are not affected by blackouts. |
FXM-880 |
Diagnose link doesn't work on the Master FMS. |
Defect ID |
Known Issue |
FADUI-1149 |
An attempt to import external groups results in the following error: Could not execute the requested operation, error(s) had occurred: Failed to retrieve groups, please make sure you correctly configured the Directory Services, check log for details. The log, however, does not contain any errors. |
FGLUI-11228 |
After changing the value of the registry value, some of the performance calendars may disappear from the list. |
FGLUI-11009 |
When editing properties from the Agent Status dashboard or the Agent Properties dashboard in Chrome 17, some edit fields are not available. |
FGLUI-10834 |
The Cartridge Inventory page is currently unable to alert users if a cartridge install fails due to lack of space in the server's temp directory. An error is written to the log files. |
FGLUI-10788 |
When editing secondary agent property tables from either the Agent Status or Agent Properties dashboards, performing Add and Delete operations at the same time results in all Added items being deleted. |
FGLUI-10504 |
Selecting the time range "All" on the Service Details dashboard can result in the page getting stuck refreshing. Avoid using the "All" time range on this page. |
FGLUI-10456 |
Selections made on the Service Selector tab of the Select services and tiers to monitor dialog box of the SOC become unselected when you switch to the Tier Selector tab and back again. |
FGLUI-10323 |
The first time the Environment Report is run it may generate a warning: "com.quest.wcf.core.component.RenderPDFContext - Text ... did not fit. in view ..." |
FGLUI-10036 |
Credential alarm messages sometimes contain UUIDs for objects related to the alarm. |
FGLUI-8261 |
When using a Federation Master that is a newer version than the Federated Child, it is possible to get warnings about missing metrics. This occurs when new metrics have been added to the Federation Master's version. The warnings indicate that the Federated Child does not provide these metrics, and they will cease when the Federated Child is upgraded to the same version as the Federation Master. |
FGLUI-7817 |
When editing secondary agent property lists, the Delete Selected Row(s) button marks the rows to be deleted by graying them out. Save changes must be selected to delete the selected rows. If a required field is blank, then a value must be entered before the row can be marked for deletion. |
FGLUI-7729 |
In the Service Builder and Service Operation Console (SOC) dashboards, when alarm filters are configured, they are applied to the main dashboards (Service Builder and SOC dashboards) and to some first level popups only. The alarm filters are not applied throughout all popups/drilldowns at any level. |
FGLUI-7593 |
When reviewing Alarms on a Federation Master, you are able to open a link to view the rule that fired the alarm on the Federated Child. This involves opening the console of the Federated Child. If the Federated Child is of an older version than the Federation Master, an error page is displayed. |
FGLUI-7377 |
Under rare conditions, if the session is allowed to expire while viewing some of the views in the Administration dashboard, the process of logging in again displays the Administration view without any decoration around the side panels. Workaround: To clear this condition, close the browser. Do not save your session if the browser prompts you to save the last session configuration. Instead, start the browser and log in again. |
FGLUI-7356 |
The column layout on the Agent Status Page does not allow resizing of columns, which can result in the host name appearing truncated. |
FGLUI-7333 |
An error message stating "Error getting value of context entry with key:timeRange" can appear in the logs when using the popup menu on the Origin field of the Alarm Details dialog. |
FGLUI-6874 |
If a Federation Master Server connects an older version Federated Child, the Federated Child may have some of the objects that are no longer associated with the Management Server Performance Report and Foglight Server Diagnostic views on the Federation Master. This results in some data about the Federated Child being unavailable to this report and views. |
FGLUI-5990 |
Inconsistency in the number of alerts shown in the "All Alarms Chart" and "Alarm List with Filter" in the Alarms dashboard. |
FGLUI-5708 |
Display all available scoping objects in the condition editor for copied and user-created rules. |
FGLUI-4628 |
On systems with a large numbers of hosts, the Host Table view can be slow to display. |
FGLUI-4544 |
Foglight 4 Tabular views generate an error when the time range has "Auto" granularity. |
FGLUI-3509 |
The edit rule definition for an alarm from a Federated Child brings up a page for editing a rule on the Federation Master, rather than for the rule that triggered the alarm. This occurs because it is not possible to perform administration from the Federation Master. |
FGLUI-3440 |
When the user pastes data using right-click > Paste to a box that automatically updates itself (for example, the edit agent properties screen), the user interface does not automatically refresh itself. |
FGLUI-3430 |
When agent activation fails, the "Activating" status box does not show the status of the failed start agent. |
FGLUI-1906 |
The Service Levels Details page does not show cleared alarms for Service Level Policy. |
FGLUI-257 |
Seconds should be displayed in the startTime and endTime in the WCF under Browse > Data when granularity is set to "raw". |
WCF-13385 |
QP5 needs to be upgraded to the latest version. |
WCF-12581 |
In Internet Explorer 8, when the number of dashboard nodes in the navigation panel exceeds the maximum that can be displayed without a scrollbar, the scrollbar does not immediately appear. |
WCF-10580 |
Tree Table list nodes should not be clickable or dwellable. |
WCF-7344 |
PDF charts and files that were requested through a proxy fail and result in a Connection Refused error. Note that this error only applies to requests made by the Management Server. |
WCF-5895 |
Vertical scrollbar not shown for the text area. |
The following is a list of issues known to exist at the time of this release.
Note: Check the release notes for each cartridge you will be using for known and late-breaking issues with that cartridge.
The timeframe selector has a new and modern implementation. It has the following limitations compared to the previous implementation:
Foglight for Automation is not supported:
See below for details. These limitations will be addressed in a future release.
When a Foglight Management Server running in High Availability mode fails over, all in-progress tasks fail and the system cannot recover them.
The Foglight Cartridge for Automation should not be installed, and workflow automation must not be used, on a Foglight Federation Master. This is because active tasks that update topology objects are not permitted on the Federation Master. Workflow automation may be installed and used on the Federated Child(ren) as usual.
Defect ID |
Known Issue |
FOG-3615 | Notification emails body prefix formatting may show as one big line instead of separated lines. Workaround: add dot "." at the end of each line you add to the email body prefix |
FOG-3589 | In the Notification Channel dashboard, on the "Alarms" tab an "Error occur" message is displayed sometimes. Workaround: Move to another domain in the same alarm template. |
WCF-15913 |
Custom rules (which are copied from existing cartridge rules) will drop some tables or charts that exist in the original Alarm dialog. Contact Quest Support for workaround. |
FGL-20162 |
Running Foglight 5.9.5 on Windows Server 2008 requires upgrading PowerShell to version 3.0. |
FGL-19877 |
Upgrading to version 5.9.3 completes successfully but the installation log contains shortcut creation failures. |
FGL-19479 |
The Management Server UI will possibly be displayed abnormally if Tomcat version is upgraded. Workaround: Clear the cache data of your web browser. |
FGL-19431 |
If you toggled enable/disable state for Alarm Integration, Incident Integration, Clear Integration Alarm, or QMX Agent Host Connection Rule rule in the Integration cartridge, its enable/disable state will be reset after upgrading to 5.9.x from 5.7.5.8. |
FGL-19283 |
When upgrading the Management Server from 5.7.5.8 to 5.9.x, unexpected CartridgeDeploymentException shows in the log file. Workaround: This exception only occurs in environments with those cartridges which define Java Archive or JBoss Artifacts component, like Integration and IntelliProfile cartridges. JBoss Server has been removed from the Management Server 5.9.x. As a result, JBossDeploymentHandler, which was used to handle above components, has also been removed from the Management Server 5.9.2 or later. If you encounter this issue, you could ignore it as this exception does not impact upgrade of the Management Server and relevant cartridges. |
FGL-18953 |
EU appliances may fail connecting the Foglight Management Server after the initial installation of Foglight Management Server. |
FGL-18611 |
LDAP accounts may fail binding to the OU group whose name includes backslash characters '\'. This can prevent Foglight to authenticate LDAP users. |
FGL-18470 |
FSMService availability calculations do not work as expected in a service hierarchy. |
FGL-18125 |
FoglightShutdownAction.checkInUsedPort() does not load port settings from server.config during an upgrade. |
FGL-18122 |
In a Windows Single-Sign ON (SSO) with untrusted multiple domains, only the user with the keytab file-corresponding group can be imported. |
FGL-18076 |
The Management Server data-driven multiple severity rules may fire multiple times for the same severity in case of concurrent data submissions. |
FGL-18075 |
The rule engine may pass non-persisted alarm IDs to rule actions. This can prevent some alarms, that are generated multiple times against the same scoping object, from firing. |
FGL-18034 |
PostgreSQL fails to start up while installing the Management Server with an embedded PostgreSQL database on a Korean OS. |
FGL-17845 |
Failing to start the Management Server with the --host=*.*.*.* option due to a failed attempt to start the embedded database. |
FGL-17826 |
LDAP users may have to log in twice to get proper role assignments. |
FGL-17769 |
Foglight is configured with a list of default ciphers. Some of these ciphers are potentially vulnerable ciphers. A review of the ciphers that will be available in a future release is ongoing. Workaround: Edit the list of ciphers by completing the following steps:
For complete information, visit http://tomcat.apache.org/tomcat-7.0-doc/config/http.html. |
FGL-17768 |
The Management Server distribution layout contains some confusing directories under server/jboss. |
FGL-17415 |
ObservationQueryPlan$QueryStep.getDayIndex(...) can result in ArrayIndexOutOfBoundsExceptions during a Daylight Savings Time (DST) change. |
FGL-17162 |
Core monitoring policy derivations are not deployed on a Federated Master. |
FGL-17055 |
Excluded objects are sometimes included in a Federation topology synchronization. |
FGL-17015 |
A Foglight Agent Manager that is no longer in use maintains a stale disconnected RemoteObject instance under the host object. This causes the host to appear as undefined on the Hosts dashboard, even though the host is monitored by Foglight for Infrastructure. |
FGL-16508 |
When federation.config does not contain any queries, TopologySynchService mistakenly logs the following warning: WARN Obsolete federated topology object purge will not be performed because the following federated servers are not connected: ... |
FGL-16487 |
Topology loading can fail for topology objects that have been converted to DataObjects. |
FGL-16439 |
Type-based exclusions in federation.config do not apply to referenced objects. |
FGL-16432 |
String observations containing reserved characters in script agents are not supported. |
FGL-16388 |
The alarm email notification code does not persist any information about notification alarms that were previously sent. If the server is restarted, all alarms appear as new, and the notifications are resent. |
FGL-16166 |
Hibernate/JDBC errors occurring while loading rules return an empty list. |
FGL-16163 |
Cleared credential alarms are found when querying for alarms that are not cleared. |
FGL-4498 |
Simple rules that report alarms directly are not affected by blackouts. |
FXM-880 |
Diagnose link doesn't work on the Master FMS. |
Defect ID |
Known Issue |
FADUI-1149 |
An attempt to import external groups results in the following error: Could not execute the requested operation, error(s) had occurred: Failed to retrieve groups, please make sure you correctly configured the Directory Services, check log for details. The log, however, does not contain any errors. |
FGLUI-11228 |
After changing the value of the registry value, some of the performance calendars may disappear from the list. |
FGLUI-11009 |
When editing properties from the Agent Status dashboard or the Agent Properties dashboard in Chrome 17, some edit fields are not available. |
FGLUI-10834 |
The Cartridge Inventory page is currently unable to alert users if a cartridge install fails due to lack of space in the server's temp directory. An error is written to the log files. |
FGLUI-10788 |
When editing secondary agent property tables from either the Agent Status or Agent Properties dashboards, performing Add and Delete operations at the same time results in all Added items being deleted. |
FGLUI-10504 |
Selecting the time range "All" on the Service Details dashboard can result in the page getting stuck refreshing. Avoid using the "All" time range on this page. |
FGLUI-10456 |
Selections made on the Service Selector tab of the Select services and tiers to monitor dialog box of the SOC become unselected when you switch to the Tier Selector tab and back again. |
FGLUI-10323 |
The first time the Environment Report is run it may generate a warning: "com.quest.wcf.core.component.RenderPDFContext - Text ... did not fit. in view ..." |
FGLUI-10036 |
Credential alarm messages sometimes contain UUIDs for objects related to the alarm. |
FGLUI-8261 |
When using a Federation Master that is a newer version than the Federated Child, it is possible to get warnings about missing metrics. This occurs when new metrics have been added to the Federation Master's version. The warnings indicate that the Federated Child does not provide these metrics, and they will cease when the Federated Child is upgraded to the same version as the Federation Master. |
FGLUI-7817 |
When editing secondary agent property lists, the Delete Selected Row(s) button marks the rows to be deleted by graying them out. Save changes must be selected to delete the selected rows. If a required field is blank, then a value must be entered before the row can be marked for deletion. |
FGLUI-7729 |
In the Service Builder and Service Operation Console (SOC) dashboards, when alarm filters are configured, they are applied to the main dashboards (Service Builder and SOC dashboards) and to some first level popups only. The alarm filters are not applied throughout all popups/drilldowns at any level. |
FGLUI-7593 |
When reviewing Alarms on a Federation Master, you are able to open a link to view the rule that fired the alarm on the Federated Child. This involves opening the console of the Federated Child. If the Federated Child is of an older version than the Federation Master, an error page is displayed. |
FGLUI-7377 |
Under rare conditions, if the session is allowed to expire while viewing some of the views in the Administration dashboard, the process of logging in again displays the Administration view without any decoration around the side panels. Workaround: To clear this condition, close the browser. Do not save your session if the browser prompts you to save the last session configuration. Instead, start the browser and log in again. |
FGLUI-7356 |
The column layout on the Agent Status Page does not allow resizing of columns, which can result in the host name appearing truncated. |
FGLUI-7333 |
An error message stating "Error getting value of context entry with key:timeRange" can appear in the logs when using the popup menu on the Origin field of the Alarm Details dialog. |
FGLUI-6874 |
If a Federation Master Server connects an older version Federated Child, the Federated Child may have some of the objects that are no longer associated with the Management Server Performance Report and Foglight Server Diagnostic views on the Federation Master. This results in some data about the Federated Child being unavailable to this report and views. |
FGLUI-5990 |
Inconsistency in the number of alerts shown in the "All Alarms Chart" and "Alarm List with Filter" in the Alarms dashboard. |
FGLUI-5708 |
Display all available scoping objects in the condition editor for copied and user-created rules. |
FGLUI-4628 |
On systems with a large numbers of hosts, the Host Table view can be slow to display. |
FGLUI-4544 |
Foglight 4 Tabular views generate an error when the time range has "Auto" granularity. |
FGLUI-3509 |
The edit rule definition for an alarm from a Federated Child brings up a page for editing a rule on the Federation Master, rather than for the rule that triggered the alarm. This occurs because it is not possible to perform administration from the Federation Master. |
FGLUI-3440 |
When the user pastes data using right-click > Paste to a box that automatically updates itself (for example, the edit agent properties screen), the user interface does not automatically refresh itself. |
FGLUI-3430 |
When agent activation fails, the "Activating" status box does not show the status of the failed start agent. |
FGLUI-1906 |
The Service Levels Details page does not show cleared alarms for Service Level Policy. |
FGLUI-257 |
Seconds should be displayed in the startTime and endTime in the WCF under Browse > Data when granularity is set to "raw". |
WCF-13385 |
QP5 needs to be upgraded to the latest version. |
WCF-12581 |
In Internet Explorer 8, when the number of dashboard nodes in the navigation panel exceeds the maximum that can be displayed without a scrollbar, the scrollbar does not immediately appear. |
WCF-10580 |
Tree Table list nodes should not be clickable or dwellable. |
WCF-7344 |
PDF charts and files that were requested through a proxy fail and result in a Connection Refused error. Note that this error only applies to requests made by the Management Server. |
WCF-5895 |
Vertical scrollbar not shown for the text area. |
The following is a list of issues known to exist at the time of this release.
Note: Check the release notes for each cartridge you will be using for known and late-breaking issues with that cartridge.
The timeframe selector has a new and modern implementation. It has the following limitations compared to the previous implementation:
Foglight for Automation is not supported:
See below for details. These limitations will be addressed in a future release.
When a Foglight Management Server running in High Availability mode fails over, all in-progress tasks fail and the system cannot recover them.
The Foglight Cartridge for Automation should not be installed, and workflow automation must not be used, on a Foglight Federation Master. This is because active tasks that update topology objects are not permitted on the Federation Master. Workflow automation may be installed and used on the Federated Child(ren) as usual.
Defect ID |
Known Issue |
FOG-3615 | Notification emails body prefix formatting may show as one big line instead of separated lines. Workaround: add dot "." at the end of each line you add to the email body prefix |
FOG-3589 | In the Notification Channel dashboard, on the "Alarms" tab an "Error occur" message is displayed sometimes. Workaround: Move to another domain in the same alarm template. |
WCF-15913 |
Custom rules (which are copied from existing cartridge rules) will drop some tables or charts that exist in the original Alarm dialog. Contact Quest Support for workaround. |
FGL-20162 |
Running Foglight 5.9.5 on Windows Server 2008 requires upgrading PowerShell to version 3.0. |
FGL-19877 |
Upgrading to version 5.9.3 completes successfully but the installation log contains shortcut creation failures. |
FGL-19479 |
The Management Server UI will possibly be displayed abnormally if Tomcat version is upgraded. Workaround: Clear the cache data of your web browser. |
FGL-19431 |
If you toggled enable/disable state for Alarm Integration, Incident Integration, Clear Integration Alarm, or QMX Agent Host Connection Rule rule in the Integration cartridge, its enable/disable state will be reset after upgrading to 5.9.x from 5.7.5.8. |
FGL-19283 |
When upgrading the Management Server from 5.7.5.8 to 5.9.x, unexpected CartridgeDeploymentException shows in the log file. Workaround: This exception only occurs in environments with those cartridges which define Java Archive or JBoss Artifacts component, like Integration and IntelliProfile cartridges. JBoss Server has been removed from the Management Server 5.9.x. As a result, JBossDeploymentHandler, which was used to handle above components, has also been removed from the Management Server 5.9.2 or later. If you encounter this issue, you could ignore it as this exception does not impact upgrade of the Management Server and relevant cartridges. |
FGL-18953 |
EU appliances may fail connecting the Foglight Management Server after the initial installation of Foglight Management Server. |
FGL-18611 |
LDAP accounts may fail binding to the OU group whose name includes backslash characters '\'. This can prevent Foglight to authenticate LDAP users. |
FGL-18470 |
FSMService availability calculations do not work as expected in a service hierarchy. |
FGL-18125 |
FoglightShutdownAction.checkInUsedPort() does not load port settings from server.config during an upgrade. |
FGL-18122 |
In a Windows Single-Sign ON (SSO) with untrusted multiple domains, only the user with the keytab file-corresponding group can be imported. |
FGL-18076 |
The Management Server data-driven multiple severity rules may fire multiple times for the same severity in case of concurrent data submissions. |
FGL-18075 |
The rule engine may pass non-persisted alarm IDs to rule actions. This can prevent some alarms, that are generated multiple times against the same scoping object, from firing. |
FGL-18034 |
PostgreSQL fails to start up while installing the Management Server with an embedded PostgreSQL database on a Korean OS. |
FGL-17845 |
Failing to start the Management Server with the --host=*.*.*.* option due to a failed attempt to start the embedded database. |
FGL-17826 |
LDAP users may have to log in twice to get proper role assignments. |
FGL-17769 |
Foglight is configured with a list of default ciphers. Some of these ciphers are potentially vulnerable ciphers. A review of the ciphers that will be available in a future release is ongoing. Workaround: Edit the list of ciphers by completing the following steps:
For complete information, visit http://tomcat.apache.org/tomcat-7.0-doc/config/http.html. |
FGL-17768 |
The Management Server distribution layout contains some confusing directories under server/jboss. |
FGL-17415 |
ObservationQueryPlan$QueryStep.getDayIndex(...) can result in ArrayIndexOutOfBoundsExceptions during a Daylight Savings Time (DST) change. |
FGL-17162 |
Core monitoring policy derivations are not deployed on a Federated Master. |
FGL-17055 |
Excluded objects are sometimes included in a Federation topology synchronization. |
FGL-17015 |
A Foglight Agent Manager that is no longer in use maintains a stale disconnected RemoteObject instance under the host object. This causes the host to appear as undefined on the Hosts dashboard, even though the host is monitored by Foglight for Infrastructure. |
FGL-16508 |
When federation.config does not contain any queries, TopologySynchService mistakenly logs the following warning: WARN Obsolete federated topology object purge will not be performed because the following federated servers are not connected: ... |
FGL-16487 |
Topology loading can fail for topology objects that have been converted to DataObjects. |
FGL-16439 |
Type-based exclusions in federation.config do not apply to referenced objects. |
FGL-16432 |
String observations containing reserved characters in script agents are not supported. |
FGL-16388 |
The alarm email notification code does not persist any information about notification alarms that were previously sent. If the server is restarted, all alarms appear as new, and the notifications are resent. |
FGL-16166 |
Hibernate/JDBC errors occurring while loading rules return an empty list. |
FGL-16163 |
Cleared credential alarms are found when querying for alarms that are not cleared. |
FGL-4498 |
Simple rules that report alarms directly are not affected by blackouts. |
FXM-880 |
Diagnose link doesn't work on the Master FMS. |
Defect ID |
Known Issue |
FADUI-1149 |
An attempt to import external groups results in the following error: Could not execute the requested operation, error(s) had occurred: Failed to retrieve groups, please make sure you correctly configured the Directory Services, check log for details. The log, however, does not contain any errors. |
FGLUI-11228 |
After changing the value of the registry value, some of the performance calendars may disappear from the list. |
FGLUI-11009 |
When editing properties from the Agent Status dashboard or the Agent Properties dashboard in Chrome 17, some edit fields are not available. |
FGLUI-10834 |
The Cartridge Inventory page is currently unable to alert users if a cartridge install fails due to lack of space in the server's temp directory. An error is written to the log files. |
FGLUI-10788 |
When editing secondary agent property tables from either the Agent Status or Agent Properties dashboards, performing Add and Delete operations at the same time results in all Added items being deleted. |
FGLUI-10504 |
Selecting the time range "All" on the Service Details dashboard can result in the page getting stuck refreshing. Avoid using the "All" time range on this page. |
FGLUI-10456 |
Selections made on the Service Selector tab of the Select services and tiers to monitor dialog box of the SOC become unselected when you switch to the Tier Selector tab and back again. |
FGLUI-10323 |
The first time the Environment Report is run it may generate a warning: "com.quest.wcf.core.component.RenderPDFContext - Text ... did not fit. in view ..." |
FGLUI-10036 |
Credential alarm messages sometimes contain UUIDs for objects related to the alarm. |
FGLUI-8261 |
When using a Federation Master that is a newer version than the Federated Child, it is possible to get warnings about missing metrics. This occurs when new metrics have been added to the Federation Master's version. The warnings indicate that the Federated Child does not provide these metrics, and they will cease when the Federated Child is upgraded to the same version as the Federation Master. |
FGLUI-7817 |
When editing secondary agent property lists, the Delete Selected Row(s) button marks the rows to be deleted by graying them out. Save changes must be selected to delete the selected rows. If a required field is blank, then a value must be entered before the row can be marked for deletion. |
FGLUI-7729 |
In the Service Builder and Service Operation Console (SOC) dashboards, when alarm filters are configured, they are applied to the main dashboards (Service Builder and SOC dashboards) and to some first level popups only. The alarm filters are not applied throughout all popups/drilldowns at any level. |
FGLUI-7593 |
When reviewing Alarms on a Federation Master, you are able to open a link to view the rule that fired the alarm on the Federated Child. This involves opening the console of the Federated Child. If the Federated Child is of an older version than the Federation Master, an error page is displayed. |
FGLUI-7377 |
Under rare conditions, if the session is allowed to expire while viewing some of the views in the Administration dashboard, the process of logging in again displays the Administration view without any decoration around the side panels. Workaround: To clear this condition, close the browser. Do not save your session if the browser prompts you to save the last session configuration. Instead, start the browser and log in again. |
FGLUI-7356 |
The column layout on the Agent Status Page does not allow resizing of columns, which can result in the host name appearing truncated. |
FGLUI-7333 |
An error message stating "Error getting value of context entry with key:timeRange" can appear in the logs when using the popup menu on the Origin field of the Alarm Details dialog. |
FGLUI-6874 |
If a Federation Master Server connects an older version Federated Child, the Federated Child may have some of the objects that are no longer associated with the Management Server Performance Report and Foglight Server Diagnostic views on the Federation Master. This results in some data about the Federated Child being unavailable to this report and views. |
FGLUI-5990 |
Inconsistency in the number of alerts shown in the "All Alarms Chart" and "Alarm List with Filter" in the Alarms dashboard. |
FGLUI-5708 |
Display all available scoping objects in the condition editor for copied and user-created rules. |
FGLUI-4628 |
On systems with a large numbers of hosts, the Host Table view can be slow to display. |
FGLUI-4544 |
Foglight 4 Tabular views generate an error when the time range has "Auto" granularity. |
FGLUI-3509 |
The edit rule definition for an alarm from a Federated Child brings up a page for editing a rule on the Federation Master, rather than for the rule that triggered the alarm. This occurs because it is not possible to perform administration from the Federation Master. |
FGLUI-3440 |
When the user pastes data using right-click > Paste to a box that automatically updates itself (for example, the edit agent properties screen), the user interface does not automatically refresh itself. |
FGLUI-3430 |
When agent activation fails, the "Activating" status box does not show the status of the failed start agent. |
FGLUI-1906 |
The Service Levels Details page does not show cleared alarms for Service Level Policy. |
FGLUI-257 |
Seconds should be displayed in the startTime and endTime in the WCF under Browse > Data when granularity is set to "raw". |
WCF-13385 |
QP5 needs to be upgraded to the latest version. |
WCF-12581 |
In Internet Explorer 8, when the number of dashboard nodes in the navigation panel exceeds the maximum that can be displayed without a scrollbar, the scrollbar does not immediately appear. |
WCF-10580 |
Tree Table list nodes should not be clickable or dwellable. |
WCF-7344 |
PDF charts and files that were requested through a proxy fail and result in a Connection Refused error. Note that this error only applies to requests made by the Management Server. |
WCF-5895 |
Vertical scrollbar not shown for the text area. |
© ALL RIGHTS RESERVED. 이용 약관 개인정보 보호정책 Cookie Preference Center