지금 지원 담당자와 채팅
지원 담당자와 채팅

DR Series Software 4.0.3 - Command Line Reference Guide

Introduction to the DR Series System Command Line Reference Guide Introducing the DR Series system Managing the DR Series system
Alerts Commands Authenticate Commands Network
Network Command Usage network --show network --delete network --restart network --setdhcp network --setstatic_ip [--bondif <bondN>] [--nwif <ethN>] --ip <IPv4/IPv6 address not already in use> --netmask <netmask> [--gateway <IPv4/IPv6 address>] network --create_bond network --create_eth network --add_member network --setdns [--suffix <dns suffix>] [--primary <IPv4/IPv6 address>] [--secondary <IPv4/IPv6 address>] network --setbonding --bondif <bondN> [--mode <ALB | 802.3ad>] [--mtu <supported MTU range 512 - 9000>] network --update network --factory_reset network --host network --route network --nslookup --destination <ip address | hostname> network --traceroute --destination <ip address | hostname> network --ping --destination <ip address | hostname> [--tries <number>] [--size <number>] [--interface <bondN | ethN>] network --blink network --enable network --troubleshoot [--links] [--gateway] [--ntp] [--dns] [--active_domain] [--nis] [--clients] [--port_mapper] [--network_config] [--show_active <NFS|CIFS|OST|RDS|NDMP|ISCSI|FC>] [--interface <bondN | ethN>] network --troubleshoot --gateway --interface <bondN | ethN> network --troubleshoot [--show_active <NFS| CIFS|OST|NDMP|ISCSI|RDS>] network --tcpdump [--port <nfs | windows | replication | ost | rds>] [--pkt_size <128 - 32768>] [--file_size <0 - 100>] [--stop] [--host <ip address list>] [--interface <bondN | ethN>] network --tcpdump [--pkt_size <128 - 32768>] network --tcpdump [--file_size <0 - 100>] network --tcpdump [--host <ip address list>] network --tcpdump [--port <nfs | windows | replication | ost | rds>] network --iperf_client --server <ip address | hostname> [--port <number>] [--window_size <num bytes [KB/MB]>] [--interval <num seconds>] [--time <num seconds>] network --iperf_server [--port <number>] [--window_size <num bytes [KB/MB>] network --help
OST RDA Stats Storage Group commands System
System Command Usage system --show [--config] system --show [--hardware] system --show [--storage] [--type <boot | internal | external>] [--service_tag <service tag>] system --show [--storage] system --show [--license] [--verbose] system --show [--ntp] system --show [--version] system --show [--timezones [Region]] system --show [--upgradefile] system --show [--upgradehistory] system --show [--marker] system --show [--replication_traffic] system --show [--opdup_traffic] system --show [--backup_traffic] system --show [--mgmt_traffic] system --init system --init --secure_erase <1–pass/3-passes/7-passes> system --reboot system --shutdown system --upgrade system --license [--validate] [--add] system --setname --name <node_name> system --setdate [--date <date>] [--timezone <Region/Zone>] system --setntp [--add <server name>] system --setntp [--delete <server name>] system --setntp [--enable] system --setntp [--disable] system --setntp [--adjust_time] system --hybrid_replication [--enable][--disable][--status] system --rdairgap [--enable][--disable][--set_retention_period <0 days to 365 days>][--get_retention_period][--open][--close][--status] system --rdairgap_schedule [--start_time <HH:MM>][--end_time <HH:MM>][--remove] system --setlogin system --telnet [--enable | --disable] system --datacheck --enable system --datacheck --disable system --datacheck --throttle system --marker [--enable] [--disable] system --verify_on_read [--enable] [--disable] system --add_storage --enclosure <service tag> system --storage [--set_usage_alert <70% - 90%>] system --storage [--blink] [--type <internal | external>] [--service_tag <service tag>] [--disk <slot num>] system --storage [--unblink] [--type <internal | external>] [--service_tag <service tag>] [--disk <slot num> system --mgmt_traffic system --backup_traffic system --replication_traffic system --opdup_traffic system --help
User Virtual Machine
Maintaining the DR Series System
Diagnostics Maintenance
Maintenance Command Usage maintenance --filesystem [--start_scan [verify_data | verify_rda_metadata | verify_metadata] [--storage_group <name>] maintenance --filesystem [--stop_scan] maintenance --filesystem [--scan_status] maintenance --filesystem [--scan_report [verbose]] maintenance --filesystem [--repair_status [verbose]] maintenance --filesystem [--repair_history [verbose]] maintenance --filesystem [--scan_restart [verify_data | verify_rda_metadata | verify_metadata]] maintenance --filesystem [--repair_now] maintenance --filesystem [--reclaim_space] maintenance --filesystem [--clear_quarantine] maintenance --filesystem [--clear_quarantine] maintenance --filesystem --show_throughput maintenance --configuration [--backup] maintenance --configuration [--restore] maintenance --configuration [--reinit_dictionary] maintenance --configuration [--reset_web_certificate] maintenance --configuration --enable_sha256_web_certificate maintenance --hardware [--reinit_nvram] maintenance --hardware [--restore_hw_db] maintenance --hardware [--motherboard_replaced] maintenance --disk [--make_standby [slot num]] [--type <internal | external-<num> | service tag>] --clear_foreign] maintenance --remote_access [--show] maintenance --remote_access [--enable] maintenance --remote_access [--racreset] maintenance --remote_access [--static_ip] [--ip <IPv4/IPv6 address>] [--netmask <netmask>] [--gateway <IPv4/IPv6 address>] [--device <lom1|lom2|lom3|lom4>] maintenance --remote access [--disable] maintenance --vdisk --check_consistency --type <boot|internal|external> [--service_tag <service tag>] maintenance --help
Managing DR Series System Storage Operations
System Storage Operation Commands Connection Container VTL NDMP iSCSI FC Replication Seed Schedule
Data Integrity Checking Additional Linux Commands About us

FC Command Usage

This topic introduces the DR Series system CLI commands that allow you to manage Fibre Channel connections when you are using virtual tape library (VTL) containers. These commands include:

fc --show [--verbose] [--target]

Description

Syntax

Result

For fc --show --verbose:

Target port: Slot 6 Port 0

Port WWN: 50:00:65:b8:36:69:96:00
Node WWN: 50:00:65:b8:36:69:90:00
Symbolic node name: "Dell Inc.: Dell DR4300"
Card description: QLogic QLE2662 Dual Port FC16 HBA
Firmware version: 8.01.02
Port state: Online
Port type: NPort (fabric via point-to-point)
Port speed: 16 Gbit
Port Enabled: Yes

Container: test2
LUN: 1
Type: Media changer (L700)
Backing store path: /dev/sg76
LUN: 2
Type: Magnetic tape (ULT3580-TD4)
Backing store path: /dev/sg36
LUN: 3
Type: Magnetic tape (ULT3580-TD4)
Backing store path: /dev/sg37
LUN: 4
Type: Magnetic tape (ULT3580-TD4)
Backing store path: /dev/sg38
LUN: 5
Type: Magnetic tape (ULT3580-TD4)
Backing store path: /dev/sg39
LUN: 6
Type: Magnetic tape (ULT3580-TD4)
Backing store path: /dev/sg40
LUN: 7
Type: Magnetic tape (ULT3580-TD4)
Backing store path: /dev/sg41
LUN: 8
Type: Magnetic tape (ULT3580-TD4)
Backing store path: /dev/sg42
LUN: 9
Type: Magnetic tape (ULT3580-TD4)
Backing store path: /dev/sg43
LUN: 10
Type: Magnetic tape (ULT3580-TD4)
Backing store path: /dev/sg44
LUN: 11
Type: Magnetic tape (ULT3580-TD4)
Backing store path: /dev/sg45

Initiators:
21:00:00:24:ff:76:58:66


Target port: Slot 6 Port 1

Port WWN: 50:00:65:b8:36:69:96:01
Node WWN: 50:00:65:b8:36:69:90:00
Symbolic node name: "Dell Inc.: Dell DR4300"
Card description: QLogic QLE2662 Dual Port FC16 HBA
Firmware version: 8.01.02
Port state: Online
Port type: NPort (fabric via point-to-point)
Port speed: 16 Gbit
Port Enabled: Yes

Container: test2
LUN: 1
Type: Media changer (L700)
Backing store path: /dev/sg76
LUN: 2
Type: Magnetic tape (ULT3580-TD4)
Backing store path: /dev/sg36
LUN: 3
Type: Magnetic tape (ULT3580-TD4)
Backing store path: /dev/sg37
LUN: 4
Type: Magnetic tape (ULT3580-TD4)
Backing store path: /dev/sg38
LUN: 5
Type: Magnetic tape (ULT3580-TD4)
Backing store path: /dev/sg39
LUN: 6
Type: Magnetic tape (ULT3580-TD4)
Backing store path: /dev/sg40
LUN: 7
Type: Magnetic tape (ULT3580-TD4)
Backing store path: /dev/sg41
LUN: 8
Type: Magnetic tape (ULT3580-TD4)
Backing store path: /dev/sg42
LUN: 9
Type: Magnetic tape (ULT3580-TD4)
Backing store path: /dev/sg43
LUN: 10
Type: Magnetic tape (ULT3580-TD4)
Backing store path: /dev/sg44
LUN: 11
Type: Magnetic tape (ULT3580-TD4)
Backing store path: /dev/sg45

Initiators:
21:00:00:24:ff:76:58:66

For fc --show --target:

fc --sessions [--topology] [--condensed]

Description

Syntax

fc --sessions --condensed

Result

For fc --sessions --condensed:

fc --help <command>

Description

Syntax

Result

관련 문서

The document was helpful.

평가 결과 선택

I easily found the information I needed.

평가 결과 선택