지금 지원 담당자와 채팅
지원 담당자와 채팅

Change Auditor 7.3 - PowerShell User Guide

Managing client authentication options

Change Auditor has two authentication method:

These commands allow you to manage the authentication used in your Change Auditor deployment.

Use this command to view the authentication profile Change Auditor coordinators use in a particular installation.

Returns: An object containing the options for authentication for the specified installation.

-Connection

A connection obtained by using the Connect-CAClient command.

-InstallationName (Optional)

The installation name to connect to. If an installation cannot be found with this name, no connection is made.

If more than one Change Auditor installation exists in the current forest, this parameter is mandatory. Omitting it results in a connection failure due to ambiguity.

-DomainName (Optional)

The name of the domain where the Change Auditor installation exists.

Get-CAAuthenticationOptions –InstallationName ‘DEFAULT’ –DomainName ‘DomainName.com’

Get-CAAuthenticationOptions -Connection $connection

Use this command to alter the authentication profile the Change Auditor coordinators use in a particular installation.

Returns: An object containing the options for authentication for the specified installation.

-Connection

A connection obtained by using the Connect-CAClient command.

-AlwaysChallengeForCredential (Optional)

 

When specified, instructs the coordinator to disallow any connection that is not accompanied by credentials. For PowerShell clients, this means that the Connect-CAClient command will not connect without the use of the
-Credential parameter.

-AllowActiveDirectoryCertificateAuthentication (Optional)

 

When specified, instructs the coordinator to allow certificate authentication via a web client. This switch has no meaning for the Win32 client.

-AllowWindowsFormsAuthentication (Optional)

 

When specified, instructs the coordinator to accept default username/password style of credentials.

-AuthenticationOptions (Optional)

 

 

This parameter allows the caller to pass directly the result of the Get-CAAuthenticationOptions without having to break down the options into their constituent flag values.

Set-CAAuthenticationOptions -Connection $connection -AlwaysChallengeForCredential
-AllowActiveDirectoryCertificateAuthentication -AllowWindowsFormsAuthentication

Set-CAAuthenticationOptions -Connection $connection -AuthenticationOptions $AuthenticationOptions

Gathering Change Auditor system information

You can gather Change Auditor system information to help you to manage your installation components.

Use this command to retrieve coordinator-specific (as opposed to installation-wide) status information from the connected coordinator such as coordinator name, status, deployment name, version, connected agents, connected legacy agents, connected clients, client port, total events, and buffered events which may be different on each coordinator.

Get-CACoordinator $connection

$creds = Get-Credential

$connection = Connect-CAClient -Credential $creds

Get-CACoordinator -Connection $connection

Use this command to gather information about all the coordinators in a Change Auditor installation.

Get-CACoordinators -Connection $connection

$creds = Get-Credential

$connection = Connect-CAClient -Credential $creds

Get-CACoordinators -Connection $connection

Use this command to retrieve installation-specific (as opposed to coordinator-specific) status information including the name of the installation, database server, and database and the database size.

Get-CAInstallation -Connection $connection

Use this command to view information on all available (and optionally uninstalled) agents.

-Connection

A connection obtained by using the Connect-CAClient command.

-IncludeUninstalled (Optional)

Adds uninstalled agents to the list of agents returned from this command.

Get-CAAgents -Connection $connection -IncludeUninstalled

Deploying Change Auditor agents

The following commands are available to manage your agent deployments.

Use this command to install an agent.

-Connection

A connection obtained by using the Connect-CAClient command.

-MachineName

The fully qualified name of a target computer.

-Credential

Credentials used to access the target computer.

-OperationTime (Optional)

Specifies when to perform this operation.

Install-CAAgent -Connection $connection -MachineName "ComputerName.DomainName.com" -Credential $credential -OperationTime “01/01/2020 12:00:00”

Use this command to ensure that the coordinator and agent can communicate using WCF framework.

-Connection

A connection obtained by using the Connect-CAClient command.

-AgentInfo

The PSCAAgentInfo retrieved from the Get-CAAgents command.

Example: Test the communication between an agent and coordinator

Ping-CAAgent -Connection $connection -AgentInfo $agentinfo

Use this command to uninstall an agent.

-Connection

A connection obtained by using the Connect-CAClient command.

-MachineName

The fully qualified name of the target computer.

-Credential

Credentials used to access the target computer.

-OperationTime (Optional)

Specifies when to perform this operation.

Uninstall-CAAgent -Connection $connection -MachineName "ComputerName.DomainName.com" -Credential $credential -OperationTime “01/01/2020 12:00:00”

Use this command to upgrade an agent.

-Connection

A connection obtained by using the Connect-CAClient command.

-Agent

Agents obtained from a previous call to Get-CAAgents.

-Credential

Credentials used to access the target computer.

-OperationTime (Optional)

Specifies when to perform this operation.

Update-CAAgent -Connection $connection -Agent $agent -Credential $credential

Use this command to update the agent configuration to ensure that the agent is using the most up-to-date configuration.

-Connection

A connection obtained by using the Connect-CAClient command.

-Agents

Agents obtained from a previous call to Get-CAAgents.

Update-CAAgentConfigurations -Connection $connection -Agents $agent

Use this command to assign an auditing configuration to an agent.

-Connection

A connection obtained by using the Connect-CAClient command.

-Agents

Agents obtained from a previous call to Get-CAAgents.

-Configuration

The configuration obtained by a previous call to Get-CAConfigurations.

Set-CAAgentConfiguration -Connection $connection -Agents $agent -Configuration
$configuration

Use this command to see the list of subsystems included in an agent‘s configuration.

-AgentInfo

The PSCAAgentInfo retrieved from the Get-CAAgents command.

Get-CAAgentSubsystems -AgentInfo $agentinfo

Use this command to enable a template.

-Connection

A connection obtained by using the Connect-CAClient command.

-Template

The template to modify.

-Credential (This is only required for the FluidFS module. It is optional for all others.)

Credentials associated with the target agent and template. These vary depending on the type of template.

Enable-CAAgentTemplate -Connection $connection -Template $template

Use this command to disable a template.

-Connection

A connection obtained by using the Connect-CAClient command.

-Template

The template to modify.

-Credential (This is only required for the FluidFS module. It is optional for all others.).

Credentials associated with the target agent and template. These vary depending on the type of template.

Disable-CAAgentTemplate -Connection $connection -Template $template

Use this command to remove a template.

 

-Connection

A connection obtained by using the Connect-CAClient command.

-Template

The template to remove.

-Credential (This is only required for the FluidFS module. It is optional for all others.)

Credentials associated with the target agent and template. These vary depending on the type of template.

Example: Remove a template

Remove-CAAgentTemplate -Connection $connection -Template $template -credential $credential

Use this command to create an agent configuration.

-Connection

A connection obtained by using the Connect-CAClient command.

-ConfigurationName

The name of the agent configuration to create.

Example: Create an agent configuration

New-CAConfiguration -Connection $connection -ConfigurationName $configurationName

Use this command to get list of all agent configurations for a deployment.

-Connection

A connection obtained by using the Connect-CAClient command.

Example: See a list of all agent configurations

Get-CAConfigurations -Connection $connection

Use this command to change the agents port used for the coordinator to communicate with the agent and to configure a proxy server.

-Connection

A connection obtained by using the Connect-CAClient command.

-Configuration

The configuration on which to set the port on.

-Port

The port the agent starts its service on for coordinator and agent communication.

-ProxyServer

The fully qualified domain name, down-level name, or IPv4 address of the proxy server.

-ProxyPort

The port on which to communicate with the proxy server. (Default is 8080).

-ProxyCredential

The credentials used to authenticate with the proxy server.

-ClearProxyCredential

Specify this parameter to clear the credentials for the proxy server authentication.

Example: Update the port used to communicate with the agent

Set-CAConfiguration –Connection $connection –Configuration $configurationObject –Port $port

Example: Update the configuration to allow for cloud-based auditing

Set-CAConfiguration -Connection $connection -Configuration $config -ProxyServer "ServerName" -ProxyPort 8080

Use this command to remove an existing agent configuration.

-Connection

A connection obtained by using the Connect-CAClient command.

-Configuration

The name of the configuration to remove.

Example: Remove an agent

Remove-CAConfiguration -Connection $connection -Configuration $configuration

Managing auditing templates

Use this command to assign an auditing template to a Change Auditor configuration.

-Connection

A connection obtained by using the Connect-CAClient command.

-Configuration

The configuration to which to add a template. Use Get-CAConfigurations to obtain the configuration object.

-Templates

The templates to apply to the configuration. Use Get-CAConfigurationTemplates to obtain the templates.

Example: Assign a template to a configuration

Add-CATemplateToConfiguration -Connection $connection -Configuration $configuration -Templates $templates

Use this command to get a list of all templates in the installation.

-Connection

A connection obtained by using the Connect-CAClient command.

Example: Get a list of all templates in the installation

Get-CAConfigurationTemplates -Connection $connection

Use this command to get a list of the templates that are assigned to a configuration.

-Connection

A connection obtained by using the Connect-CAClient command.

-Configuration

Use Get-CAConfigurations to obtain the configuration object.

Example: Get a list of all templates assigned to a configuration

Get-CATemplatesInConfiguration -Connection $connection -Configuration $configuration

 

Use this command to remove templates from a configuration.

-Connection

A connection obtained by using the Connect-CAClient command.

-Configuration

The configuration from which to remove a template. Use Get-CAConfigurations to obtain the configuration object.

-Templates

The templates to remove from the configuration. Use Get-CAConfigurationTemplates to obtain the templates.

Example: Remove a template from a configuration

Remove-CATemplatesFromConfiguration -Connection $connection -Connection $connection
-Configuration $configuration

 

 

관련 문서

The document was helpful.

평가 결과 선택

I easily found the information I needed.

평가 결과 선택