Checked med Media Management Window the taps are full with 100% But only 52.22 GB Data. But LTO can store up to 200GB without compression.
Ran backup test to tape drive using tar 150 GB data using following commands and the backup worked.
# mt –f /dev/st0 status
# mt –f /dev/st0 rewind
# mt –f /dev/st0 setblk 0
# tar –cvf /dev/st0 file_to_be_backed_up
Note if this happens on windows use NT backup to run a similar test
In netvault all device configuration is held in the device tree files so it would appear that something has happened to the drive parameters set for the drive.
Remove and read the library or standalone drive making sure that the correct template has been added for the drive you are using.
Note the drive is normally recognised and correct template loaded but check this is correct if not use the drop down menu and chose the correct drive.
Sometimes if the device tree has corruption you need to remove and recreate the device tree files. To do this see solution below:
https://support.quest.com/Search/SolutionDetail.aspx?id=SOL79547
© ALL RIGHTS RESERVED. Feedback Terms of Use Privacy Cookie Preference Center