There may be times when you need to change the Rapid Recovery license applied to a machine, such as when moving from a trial license to a subscription or perpetual license. In such instances, you can change the license in the Command Prompt by using the Set-License command.
Usage
The usage for the command is as follows:
Set-License -core [host name] -user [user name] -password [password] -licensekey [license key] -licensepath [license file path] -licensenumber [license number] -email [email address]
Command Options
The following table describes the options available for the Set-License command:
Table 159: Set-License command options
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
-licensekey |
Optional. A 30-character key comprising six groups of five alphanumeric characters, each separate by a hyphen. Use this key when a license file is not available. |
-licensepath |
Optional. The path to the file that ends with the .lic extension. If a license file is available, you can use this option instead of the -licensekey. |
-licensenumber |
Optional. You may have received this nine-digit license number in an order confirmation email. If you provide this number, use the email address that received it for verification. |
-email |
Optional. If you use the -licensenumber, you must include the email address that received it for verification. |
Examples:
Change the license key associated with this Core to JL09F-89FSD-6THFS-DSE34-KS3D5-65DF2:
>Set-License -core 10.10.10.10 -user admin -password 676df#df -licensekey JL09F-89FSD-6THFS-DSE34-KS3D5-65DF2
Change the license key associated with this Core to the key contained in the license file:
>Set-License -core 10.10.10.10 -user admin -password 676df#df -licensepath C:\MyLicenseFile.lic
Change the license number associated with this Core to 111-111-111 using john.doe@example.com to verify the license:
>Set-License -core 10.10.10.10 -user admin -password 676df#df -licensenumber 111-111-111 -email john.doe@example.com
The Set-OracleMetadataCredentials command lets you set the metadata credentials for a specified Oracle instance.
Usage
The usage for the command is as follows:
Set-OracleMetadataCredentials -core [host name] -user [user name] -password [password] -protectedserver [name | IP address] -instancename [Oracle instance SID] -connectiontype [-basic | TNS] -hostname [host name | IP address] -port [port number] [-usesid] -instanceservicename [service name] -tnsnetworkalias [TNS alias] [-usewindowsauthentication] -oracleusername [user name] -oraclepassword [password] [-edit]
Command Options
The following table describes the options available for the Set-OracleMetadataCredentials command:
Table 160: Set-OracleMetadataCredentialscommand options
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
-protectedserver |
The name or IP address of the protected machine. |
-instancename |
The Oracle SID from which you want to fetch metadata. |
-connectiontype |
Use this option to identify the connection type. It must be represented by either basic or TNS. |
-hostname |
Optional. The name of the Oracle host. Use it for the basic connection type. |
-port |
Optional. A port number. Use it for the basic connection type. |
-usesid |
Optional. This option uses the -instancename to identify the Oracle instance. Use it for the basic connection type. |
-instanceservicename |
Optional. The Oracle instance service name. Use it when the -usesid is not specified and for the basic connection type. |
-tnsnetworkalias |
Optional. Use this option to identify the TNS network alias when using the TNS connection type. |
-usewindowsauthentication |
Optional. This option lets you authenticate with your Windows credentials. |
-oracleusername |
Optional. The user name for the Oracle instance. |
-oraclepassword |
Optional. The password for the Oracle instance. |
-edit |
Optional. This option lets you omit any number of options. |
Examples:
Set the metadata credentials for the ORCL instance on a protected server using the basic connection type:
>Set-OracleMetadataCredentials -core 10.10.127.42 -user admin -password -676df#df -protectedserver 10.10.34.88 -instancename ORCL -connectiontype basic -hostname localhost -port 1521 -usesid -oracleusername User-ORA -oraclepassword 676df#df
Set the metadata credentials for the ORCL instance on a protected server using the TNS connection type and Windows authentication:
>Set-OracleMetadataCredentials -core 10.10.127.42 -user admin -password -676df#df -protectedserver 10.10.34.88 -instancename ORCL -connectiontype TNS -tnsnetworkalias ORCL_ALIAS -usewindowsauthentication
Use the Set-ReplicationResponse command to manage pending replication requests.
Usage
The usage for the command is as follows:
Set-ReplicationResponse -core [host name] -user [user name] -password [password] -id [replication ID] -accept | -deny | -ignore -protectedserver [name | IP address]
Command Options
The following table describes the options available for the Set-ReplicationResponse command:
Table 161: Set-ReplicationResponse command options
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used |
-id |
The identifier for the replication job or pending replication request. It can be a remote Core ID, host name, customer ID, email address, or pending replication request ID. |
-accept |
Accepts the replication request. |
-deny |
Denies the replication request. |
-ignore |
Ignores the replication request. |
-protectedserver |
When responding to a replication request, use this option to apply your response to list of protected servers with a repository name or ID. Use the parameter "all" to apply response to all requested machines. |
Examples:
Accept a pending replication request for one protected machines:
>Set-ReplicationResponse -id customer@email.address -accepted -protectedserver 10.10.1.1 Repository1 10.10.1.2 Repository2 -responsecomment A response comment
Deny a pending replication request:
>Set-ReplicationResponse -id customer@email.address -deny
Businesses often use long-term storage to archive both compliant and non-compliant data. The archive feature in Rapid Recovery is used to support the extended retention for compliant and non-compliant data. The administrator can save an archive on the local storage or network location by specifying the /Path command and credentials.
Usage
The usage for the command is as follows:
Start-Archive -path -startdate -enddate [-all] | -protectedserver [machine name] or [IP]] -core [host name] -user [user name] -password [password]
Command Options
The following table describes the options available for the Start-Archive command:
Table 162: Start-Archive command options
-? |
Display this help message. |
-path |
Location path. Example path: ‘D:\work\archive’ or network path: ‘\\servername\sharename’. |
-all |
Archive recovery points for all machines on the Core. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine. |
-startdate |
Start date of the date range for the created recovery points. Should be in the format specified by the OS on the current PC. |
-enddate |
End date of the date range. Defaults to the current time. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none are provided, then the logged-on user's credentials will be used. |
-protectedserver |
Archive recovery points for the specified machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password. If none are provided, then the logged-on user's credentials will be used. |
-archiveusername |
Optional. Required for network path only. |
-archivepassword |
Optional. Required for network path only. |
-comment |
Optional. Example: -comment 'Before install new application'. |
Example:
Archive all recovery points for all machines on the Core:
>Start-Archive -path D:\work\archive -startdate 'Example 04/30/2012' –all
