Rapid Recovery 6.9 - Commands and Scripting Reference Guide

Introduction to Rapid Recovery Command Line Management utility

ApplyLicense Archive CancelActiveJobs CheckRepository ConfigureAgentMigration CreateArchiveRepository CreateBootCD CreateEncryptionKey CreateNASRepository CreateRepository DedupCacheConfig DeleteReplication DeleteRepository DeleteTieredRepository DeployToAzure Dismount DismountRepository DismountArchiveRepository DismountRemote EditEsxServer EditHyperVCluster EditHyperVServer EditOracleDBVerifyNightlyJob EditOracleLogTruncationNightlyJob EnableOracleArchiveLogMode FileSearch Force ForceAttach ForceChecksum ForceLogTruncation ForceMount ForceOptimizationJob ForceReplication ForceRollup ForceScheduledArchive ForceVirtualStandby GetOracleInstanceMetadata Help List ListAzureVMSizes ListOracleInstances ManagementCertificates Mount MountRepository MountArchiveRepository NewCloudAccount OpenDvmRepository Pause Protect ProtectCluster ProtectEsxServer ProtectHyperVCluster ProtectHyperVServer RemoveAgent RemoveArchiveRepository RemovePoints RemoveScheduledArchive RemoveVirtualStandby Replicate Replication ResizeDedupeCache RestartCoreService RestoreAgent RestoreArchive RestoreUrc Resume ResumeScheduler SeedDrive SetAgentMetadataCredentials SetOracleMetadataCredentials StartExport StartExportAzure StartOracleDBVerifyJob StartOracleLogTruncationJob StopCoreService SuspendScheduler UpdateRepository Version VirtualStandby

Localization

PowerShell module

Prerequisites for using PowerShell

powershell.exe.config

Working with commands and cmdlets Rapid Recovery PowerShell module cmdlets

Add-EsxAutoProtectObjects Add-EsxVirtualMachines Add-HyperVClusterSharedVirtualDisks Add-HyperVClusterVirtualMachines Add-HyperVVirtualMachines Disable-HyperVAutoProtection Edit-AzureVirtualStandby Edit-EsxiVirtualStandby Edit-HyperVVirtualStandby Edit-OracleDBVerifyNightlyJob Edit-OracleLogTruncationNightlyJob Edit-Replication Edit-ScheduledArchive Edit-VBVirtualStandby Edit-VMVirtualStandby Enable-HyperVAutoProtection Enable-OracleArchiveLogMode Get-ActiveJobs Get-CloudAccounts Get-Clusters Get-CompletedJobs Get-ExchangeMailStores Get-Failed Get-FailedJobs Get-HyperVClusterSharedVirtualDisks Get-ListAzureVMSizes Get-Mounts Get-OracleInstances Get-Passed Get-ProtectedServers Get-ProtectionGroups Get-QueuedJobs Get-RecoveryPoints Get-ReplicatedServers Get-Repositories Get-ScheduledArchives Get-SqlDatabases Get-TransferQueueEntries Get-UnprotectedVolumes Get-Version Get-VirtualizedServers Get-Volumes New-AzureVirtualStandby New-Base New-BootCD New-CloudAccount New-EncryptionKey New-EsxiVirtualStandby New-FileSearch New-HyperVVirtualStandby New-Mount New-Replication New-Repository New-ScheduledArchive New-Snapshot New-VBVirtualStandby New-VMVirtualStandby Push-Replication Push-Rollup Remove-Agent Remove-EsxAutoProtectObjects Remove-HyperVClusterSharedVirtualDisks Remove-HyperVClusterVirtualMachines Remove-HyperVVirtualMachines Remove-Mount Remove-Mounts Remove-RecoveryPoints Remove-RemoteMount Remove-RemoteMounts Remove-Replication Remove-Repository Remove-ScheduledArchive Remove-VirtualStandby Restart-CoreService Resume-Replication Resume-ScheduledArchive Resume-Snapshot Resume-VirtualStandby Set-AgentMetadataCredentials Set-DedupCacheConfiguration Set-License Set-OracleMetadataCredentials Set-ReplicationResponse Start-Archive Start-AttachabilityCheck Start-AzureDeploy Start-AzureExport Start-ChecksumCheck Start-ConsumeSeedDrive Start-CopySeedDrive Start-EsxiExport Start-HypervExport Start-LogTruncation Start-MountabilityCheck Start-OptimizationJob Start-OracleDBVerifyJob Start-OracleLogTruncationJob Start-Protect Start-ProtectCluster Start-ProtectEsxServer Start-ProtectHyperVCluster Start-ProtectHyperVServer Start-RepositoryCheck Start-RestoreAgent Start-RestoreArchive Start-ScheduledArchive Start-VBExport Start-VirtualStandby Start-VMExport Stop-ActiveJobs Stop-CoreService Suspend-Replication Suspend-ScheduledArchive Suspend-Scheduler Suspend-Snapshot Suspend-VirtualStandby Suspend-VMExport Update-Repository

Localization Qualifiers

Scripting

Using PowerShell scripting with Rapid Recovery

Qualifiers Input Parameters for PowerShell Scripting Sample PowerShell scripts

PreTransferScript.ps1 PostTransferScript.ps1 PreExportScript.ps1 PostExportScript.ps1 PreNightlyJobScript.ps1 PostNightlyJobScript.ps1

Using Bourne shell and Bash scripting with Rapid Recovery

Input parameters for shell scripting Sample shell scripts

PreTransferScript.sh PostTransferScript.sh PreSnapshotScript.sh PostSnapshotScript.sh PostExportScript.sh

Remove-EsxAutoProtectObjects

PowerShell module > Rapid Recovery PowerShell module cmdlets > Remove-EsxAutoProtectObjects

The Remove-EsxAutoProtectObjects cmdlet lets you remove specific objects on vCenter or ESXi server from protection by a Core.

Usage

The usage for the command is as follows:

Remove-EsxAutoProtectObjects -core [host name] -user [user name] -password [password] -protectedserver [name | IP address] -autoprotectobjects

Command Options

The following table describes the options available for the Remove-EsxAutoProtectObjects command:

Table 139: Remove-ESXAutoProtectObjects command options
Option	Description
-?	Display this help message.
-core	Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-user	Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password. If none are provided, then the logged-on user's credentials will be used.
-password	Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on. If none are provided, then the logged-on user's credentials will be used.
-protectedserver	Use this option to edit the vCenter or ESXi objects for a specific protected machine.
-autoprotectobjects	A list of vCenter or ESXi objects each enclosed in double quotes and separated by a comma.

Example:

Remove specific vCenter or ESXi objects from protection auto-protection by the Core:

>Remove-EsxAutoProtectObjects -protectedserver 10.10.8.150 -autoprotectobjects "vm1", "vm2"

Remove-HyperVClusterSharedVirtualDisks

PowerShell module > Rapid Recovery PowerShell module cmdlets > Remove-HyperVClusterSharedVirtualDisks

The Remove-HyperVClusterSharedVirtualDisks cmdlet lets you remove shared Hyper-V virtual disks from protection of a Core.

Usage

The usage for the command is as follows:

Remove-HyperVClusterSharedVirtualDisks -core [host name] -user [user name] -password [password] -shareddisks [shared virtual disks name or path collection | all]

Command Options

The following table describes the options available for the Remove-HyperVClusterSharedVirtualDisks command:

Table 140: Remove-HyperVClusterSharedVirtualDisks command options
Option	Description
-?	Display this help message.
-core	Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-user	Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password. If none are provided, then the logged-on user's credentials will be used.
-password	Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on. If none are provided, then the logged-on user's credentials will be used.
-protectedserver	Use this option to edit the shared virtual disks for a specific protected machine.
-shareddisks	A list of shared disks each separate by a comma.

Example:

Remove one shared virtual disk from protection:

>Remove-HyprVClusterSharedVirtualDisks -protectedserver "HV-2012R2" -shareddisks "Shared Disk 1"

Remove-HyperVClusterVirtualMachines

PowerShell module > Rapid Recovery PowerShell module cmdlets > Remove-HyperVClusterVirtualMachines

The Remove-HyperVClusterVirtualMachines cmdlet lets you remove specific virtual machines (VMs) of a Hyper-V cluster from protection of a Core.

Usage

The usage for the command is as follows:

Remove-HyperVClusterVirtualMachines -core [host name] -user [user name] -password [password] -repository [name] -protectedserver [name | IP address] -virtualmachines [virtual machines collection | all]

Command Options

The following table describes the options available for the Remove-HyperVClusterVirtualMachines command:

Table 141: Remove-HyperVClusterVirtualMachines command options
Option	Description
-?	Display this help message.
-core	Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-user	Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password. If none are provided, then the logged-on user's credentials will be used.
-password	Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on. If none are provided, then the logged-on user's credentials will be used.
-protectedserver	Use this option to protect virtual machines.
-virtualmachines	A list of the virtual machines that you want to protect, each separated by a comma. The name of the VM must be enclosed in double quotes.
-deleterecoverypoints	Optional. Include this option if you want to delete all of the recovery points for this VM.

Example:

Remove specific virtual machines of a Hyper-V cluster from protection by the Core and delete its recovery points:

>Remove-HyperVClusterVirtualMachines -protectedserver hvcluster -virtualmachines "Win8x64-gen1", "Win2012x64-gen2" -deleterecoverypoints

Remove-HyperVVirtualMachines

PowerShell module > Rapid Recovery PowerShell module cmdlets > Remove-HyperVVirtualMachines

The Remove-HyperVVirtualMachines cmdlet lets you remove specific Hyper-V virtual machines (VMs) from the protection of a Core.

Usage

The usage for the command is as follows:

Remove-HyperVVirtualMachines -core [host name] -user [user name] -password [password] -protectedserver [name | IP address] -virtualmachines [virtual machines collection | all] -deleterecoverypoints

Command Options

The following table describes the options available for the Remove-HyperVVirtualMachines command:

Table 142: Remove-HyperVVirtualMachines command options
Option	Description
-?	Display this help message.
-core	Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-user	Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password. If none are provided, then the logged-on user's credentials will be used.
-password	Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on. If none are provided, then the logged-on user's credentials will be used.
-protectedserver	Use this option to edit Hyper-V objects for a specific virtual machine.
-virtualmachines	A list of the virtual machines that you want to protect, each separated by a comma. The name of the VM must be enclosed in double quotes.
-deleterecoverypoints	Optional. Include this option if you want to delete all of the recovery points for this VM.

Example:

Remove specific Hyper-V VMs from protection and delete its recovery points:

>Remove-HyperVVirtualMachines -protectedserver HVServer1 -virtualmachines "Win8x64-gen1", "Win2012x64-gen2" -deleterecoverypoints

製品を選択してください:

サービス向上のために、「Purpose of your Chat（チャットの目的）」を記入してください。

お客様の不具合に推奨されるソリューション

Rapid Recovery 6.9 - Commands and Scripting Reference Guide

Remove-EsxAutoProtectObjects

Usage

Command Options

Example:

Remove-HyperVClusterSharedVirtualDisks

Usage

Command Options

Example:

Remove-HyperVClusterVirtualMachines

Usage

Command Options

Example:

Remove-HyperVVirtualMachines

Usage

Command Options

Example: