Foglight for Infrastructure 5.9.3

An object that represents a resource group, but treated as a Host, since it extends HostExtension. The WindowsAgent’s 'treatResourceGroupAsHost' boolean must be enabled in order for these to be created. Along with the MSHostedResourceGroup, a new Host object of equivalent name is created. The two objects together can be used to represent the host on which a resource group is running. The actual host running the resource group can be determined from the object’s 'activeHost' property.

Table 50. MSHostedResourceGroup topology object
Metric Name	Metric Description	Metric Collected for These Platforms
activeHost	The host currently hosting the resource group. If performance metrics (such as CPU metrics) should be associated with the resource group, the values on the activeHost may be helpful.	Windows®
clusterName	The cluster of which the resource group is a part.	Windows
host	A fabricated host, with name matching that of the MSHostedResourceGroup.	Windows
name	The name of the hosted resource group, shared by the host property’s name. It is a combination of the clusterName and resource group name.	Windows
resourceGroupName	The name of the resource group.	Windows

Memory topology object

There is a single Memory object attached to a host that is identified by that Host instance. The name property of a Memory object is set with the constant string Memory.

Table 51. Memory topology object
Metric Name	Metric Description	Metric Collected for These Platforms
capacity	The amount of memory (megabyte) installed on or allocated to the host.	AIX® HP-UX Linux® Solaris® Windows®
consumed	The amount of memory (megabyte) that is being used on the host.	AIX HP-UX Linux Solaris Windows
fileSystemCache	The amount of physical memory (Mb) used as a file system cache.	Linux¹ Solaris²
nonPagedKernelMemory	The amount of memory (Mb) allocated by the kernel that cannot be paged out.	none
pageInRate	The rate (count/second) at which pages are being read from disk. NOTE: IntelliProfile thresholds are defined for this metric. For details, review the thresholds list in the Manage Thresholds dashboard.	AIX HP-UX Linux Solaris Windows
pageOutRate	The rate (count/second) at which pages are being written to disk. NOTE: IntelliProfile thresholds are defined for this metric. For details, review the thresholds list in the Manage Thresholds dashboard.	AIX HP-UX Linux Solaris Windows
pageScanRate	The number of pages scanned by the clock per second.(count/second)	AIX HP-UX Linux Solaris Windows
pagedKernelMemory	The amount of physical memory (Mb) used by the kernel for data that can be paged out.	none
utilization	The percentage of physical memory that is currently utilized. NOTE: IntelliProfile thresholds are defined for this metric. For details, review the thresholds list in the Manage Thresholds dashboard.	AIX® HP-UX Linux Solaris Windows
virtualMemorySize	The total amount of virtual memory (Mb) allocated on the host. This is physical memory size plus the size of the paging/swap space.	AIX HP-UX Solaris
hugePagesTotal	The pool size of huge pages	Linux
hugePagesFree	The available pool size of huge pages	Linux
hugePageSize	The default size of huge page	Linux

Collected for Linux platforms only by the UnixAgentPlus.

Collected for Solaris platforms only by the UnixAgentPlus.

NetworkInterface topology object

A single network interface. Multiple network interfaces can be assigned to a single host object.

Table 52. NetworkInterface topology object
Metric Name	Metric Description	Metric Collected for These Platforms
bandwidth	The bandwidth (bit/second) of the network interface (for example, 100Mb/s).	AIX®¹ HP-UX² Linux®³ Solaris® Windows®
collisions	The number of collisions (requiring packet resend) that occurred on the network interface. (count)	AIX HP-UX⁴ Linux Solaris
discoveryStatus	This value is set to Active if the interface was recently discovered and/or verified to exist. The value is set to Inactive if the interface is considered obsolete.	AIX⁵ HP-UX
inboundErrors	The number (count) of inbound packets that were dropped because of errors.	AIX HP-UX Linux Solaris Windows
inboundPacketsDropped	The number of inbound packets that were dropped even though no error that would have prevented the packet from being received was detected. (count)	HP-UX⁶ Linux Windows
interfaceIndex	A unique number (> 0) identifying the interface within the device.	none
interfaceType	The type of interface as assigned by the Internet Assigned Numbers Authority (IANA).	AIX HP-UX Linux
ipAddress	IP address of the interface.	AIX HP-UX Linux Solaris
isLayer2	This property is set to true if the interface is a layer 2 interface.	none
layer2Segment	The layer 2 segment to which the interface belongs.	none
macAddress	The MAC or physical address assigned to the interface.	AIX HP-UX Linux Solaris
netmask	The subnet mask associated with the IP address of the interface.	AIX HP-UX Linux Solaris
networkSegment	The network segment to which the interface belongs.	AIX HP-UX Solaris
outboundErrors	The number (count) of outbound packets that could not be transmitted because of errors.	AIX HP-UX Linux Solaris Windows
outboundPacketsDropped	The number (count) of outbound packets that were dropped even though no error that would have prevented the transmission was detected.	HP-UX⁷ Linux Windows
outputQueueLength	The length of the output packet queue (count).	HP-UX⁸ Windows
packetsReceived	The number of packets received on this interface (count/second).	AIX HP-UX Linux Solaris Windows
packetsSent	The number of packets sent on this interface (count/second).	AIX HP-UX Linux Solaris Windows
portNumber	The port number associated with the interface.	none
receiveRate	The receive rate on this network interface (bit/second).	AIX⁹ HP-UX¹⁰ Linux Solaris Windows
sendRate	The send rate on this network interface (bit/second).	AIX¹¹ HP-UX¹² Linux Solaris Windows
utilization	The utilization of the network interface’s bandwidth.	AIX¹³ HP-UX¹⁴ Linux¹⁵ Solaris Windows

This metric is not available on AIX systems using non-native collectors.

This metric is not available on HP-UX systems using non-native collectors.

This metric is reported by ethtool (or, if unavailable, by mii-tool). This metric is not available for loopback interfaces. It requires use of sudo for the agent to collect. (For more information about sudo commands that require root access, see Configuring secure launcher permissions using sudo.)

This metric is not available on HP-UX systems using non-native collectors.

This metric is not available on AIX systems using native collectors.

This metric is not available on HP-UX systems using non-native collectors.

This metric is not available on AIX systems using non-native collectors.

This metric is not available on HP-UX systems using non-native collectors.

This metric is not available on AIX systems using non-native collectors.

This metric is not available on HP-UX systems using non-native collectors.

This metric is not available on AIX systems using non-native collectors.

This metric is not available on HP-UX systems using non-native collectors.

This metric requires bandwidth from ethtool or mii-tool. It requires use of sudo for the agent to collect. (For more information about sudo commands that require root access, see Configuring secure launcher permissions using sudo.)

NetworkInterfaceDetails topology object

This topology object houses additional metrics related to the network interface.

Table 53. NetworkInterfaceDetails topology object
Metric Name	Metric Description	Metric Collected for These Platforms
collisions	The number of collisions (requiring packet resend) that occurred on the network interface. (count)	AIX® HP-UX¹ Linux® Solaris®

This metric is not available on HP-UX systems using native collectors.

製品を選択してください:

サービス向上のために、「Purpose of your Chat（チャットの目的）」を記入してください。

お客様の不具合に推奨されるソリューション

Foglight for Infrastructure 5.9.3 - User Guide

MSHostedResourceGroup topology object

Memory topology object

NetworkInterface topology object

NetworkInterfaceDetails topology object