DR Series Software 4.0.4 - Command Line Reference Guide

Description

Deletes the specified storage group from the DR Series system.

NOTE: Before a storage group can be deleted, all of the containers inside the storage group must first be deleted.

Syntax

storage_group --delete --name StorageGroup_1

Result

Storage Group "StorageGroup_1" has been deleted.

storage_group --help

Description

Displays the list of all storage_group-related options that can be used as a reference when using the DR Series system CLI.

Syntax

storage_group --help

Result

Usage:
  storage_group --show [--name <name>]
		[--verbose]

 storage_group --add --name <name>
             [--compression_mode <fast|best>]  
              
        storage_group --update --name <name>  
             [--compression_mode <fast|best>]  
              
        storage_group --encryption --name <name>  
             [--set <ON|OFF>]  
             [--mode <static | internal>]  
             [--interval <7 days to 70 years>]  
              
        storage_group --delete --name <name>
              
        storage_group --setpassphrase --name <name>
              
        storage_group --help  
      
       storage_group <command> <command-arguments>
       command can be one of:   
            --show            Displays the current list of storage_group.  
            --add             Adds a new storage_group.  
            --update          updates a storage_group.  
            --encryption      updates encryption settings of a storage_group.  
            --delete          Deletes an existing storage_group.  
            --setpassphrase   sets passphrase to a storage_group.  
      
    For command-specific help, please type storage_group --help <command>   
        eg:  
            storage_group --help show

System

This DR Series system CLI command and its options allow you to perform the a variety of system-related tasks, including the following:

Displaying the current system configuration
Initializing, rebooting, or shutting down the DR Series system
Upgrading the DR Series system software
Setting the system date and time
Setting the network time protocol (NTP)
Updating the login password
Enabling or disabling telnet access
Enabling or disabling marker detection status

NOTE: For information on the system --datacheck commands that are associated with the Data Check feature, see system --datacheck.

System Command Usage

This topic introduces the system command usage:

system --show [options]
system --init [options]
system --reboot
system --shutdown
system --upgrade
system --license [options]
system --setname --name
system --setdate [options]
system --setntp [options]
system --hybrid_replication [options]
system --rdairgap [options]
system --rdairgap_schedule [options]
system --setlogin
system --telnet [options]
system --datacheck [options]
system --marker [options]
system --verify_on_read [options]
system --add_storage --enclosure (Option only available on a physical hardware DR Series system)
system --storage [options]
system --mgmt_traffic (Option only available on a physical hardware DR Series system)
system --backup_traffic (Option only available on a physical hardware DR Series system)
system --replication_traffic (Option only available on a physical hardware DR Series system)
system --opdup_traffic (Option only available on a physical hardware DR Series system)
system --help

NOTE: If you specify a command without supplying the expected value or option, you will be prompted to provide the correct value or option.

製品を選択してください:

サービス向上のために、「Purpose of your Chat（チャットの目的）」を記入してください。

お客様の不具合に推奨されるソリューション

DR Series Software 4.0.4 - Command Line Reference Guide

storage_group --delete --name <name>

Description

Syntax

Result

storage_group --help

Description

Syntax

Result

System

System Command Usage