サポートと今すぐチャット
サポートとのチャット

DR Series Software 4.0 - Command Line Reference Guide

Introduction to the DR Series System Command Line Reference Guide Introducing the DR Series system Managing the DR Series system
Alerts Commands Authenticate Commands Network
Network Command Usage network --show network --delete network --restart network --setdhcp network --setstatic_ip [--bondif <bondN>] [--nwif <ethN>] --ip <IPv4/IPv6 address not already in use> --netmask <netmask> [--gateway <IPv4/IPv6 address>] network --create_bond network --create_eth network --add_member network --setdns [--suffix <dns suffix>] [--primary <IPv4/IPv6 address>] [--secondary <IPv4/IPv6 address>] network --setbonding --bondif <bondN> [--mode <ALB | 802.3ad>] [--mtu <supported MTU range 512 - 9000>] network --update network --factory_reset network --host network --route network --nslookup --destination <ip address | hostname> network --traceroute --destination <ip address | hostname> network --ping --destination <ip address | hostname> [--tries <number>] [--size <number>] [--interface <bondN | ethN>] network --blink network --enable network --disable network --troubleshoot [--links] [--gateway] [--ntp] [--dns] [--active_domain] [--nis] [--clients] [--port_mapper] [--network_config] [--show_active <NFS|CIFS|OST|RDS|NDMP|ISCSI|FC>] [--interface <bondN | ethN>] network --troubleshoot --gateway --interface <bondN | ethN> network --troubleshoot [--show_active <NFS| CIFS|OST|NDMP|ISCSI|RDS>] network --tcpdump [--port <nfs | windows | replication | ost | rds>] [--pkt_size <128 - 32768>] [--file_size <0 - 100>] [--stop] [--host <ip address list>] [--interface <bondN | ethN>] network --tcpdump [--pkt_size <128 - 32768>] network --tcpdump [--file_size <0 - 100>] network --tcpdump [--host <ip address list>] network --tcpdump [--port <nfs | windows | replication | ost | rds>] network --iperf_client --server <ip address | hostname> [--port <number>] [--window_size <num bytes [KB/MB]>] [--interval <num seconds>] [--time <num seconds>] network --iperf_server [--port <number>] [--window_size <num bytes [KB/MB>] network --help
OST RDA Stats Storage Group commands System
System Command Usage system --show [--config] system --show [--hardware] system --show [--storage] [--type <boot | internal | external>] [--service_tag <service tag>] system --show [--storage] system --show [--license] [--verbose] system --show [--ntp] system --show [--version] system --show [--timezones [Region]] system --show [--upgradefile] system --show [--upgradehistory] system --show [--marker] system --show [--replication_traffic] system --show [--opdup_traffic] system --show [--backup_traffic] system --show [--mgmt_traffic] system --init system --init --secure_erase <1–pass/3-passes/7-passes> system --reboot system --shutdown system --upgrade system --license [--validate] [--add] system --setname --name <node_name> system --setdate [--date <date>] [--timezone <Region/Zone>] system --setntp [--add <server name>] system --setntp [--delete <server name>] system --setntp [--enable] system --setntp [--disable] system --setntp [--adjust_time] system --setlogin system --telnet [--enable | --disable] system --datacheck --enable system --datacheck --disable system --datacheck --throttle system --marker [--enable] [--disable] system --verify_on_read [--enable] [--disable] system --add_storage --enclosure <service tag> system --storage [--set_usage_alert <70% - 90%>] system --storage [--blink] [--type <internal | external>] [--service_tag <service tag>] [--disk <slot num>] system --storage [--unblink] [--type <internal | external>] [--service_tag <service tag>] [--disk <slot num> system --mgmt_traffic system --backup_traffic system --replication_traffic system --opdup_traffic system --support_agent --register system --support_agent --unregister system --support_agent --stats system --support_agent --status system --help
User Virtual Machine
Maintaining the DR Series System
Diagnostics Maintenance
Maintenance Command Usage maintenance --filesystem [--start_scan [verify_data | verify_rda_metadata | verify_metadata] [--storage_group <name>] maintenance --filesystem [--stop_scan] maintenance --filesystem [--scan_status] maintenance --filesystem [--scan_report [verbose]] maintenance --filesystem [--repair_status [verbose]] maintenance --filesystem [--repair_history [verbose]] maintenance --filesystem [--scan_restart [verify_data | verify_rda_metadata | verify_metadata]] maintenance --filesystem [--repair_now] maintenance --filesystem [--reclaim_space] maintenance --filesystem [--stop_reclaim_space] maintenance --filesystem [--clear_quarantine] maintenance --filesystem --show_throughput maintenance --configuration [--backup] maintenance --configuration [--restore] maintenance --configuration [--reinit_dictionary] maintenance --configuration [--reset_web_certificate] maintenance --hardware [--reinit_nvram] maintenance --hardware [--restore_hw_db] maintenance --hardware [--motherboard_replaced] maintenance --disk [--make_standby [slot num]] [--type <internal | external-<num> | service tag>] --clear_foreign] maintenance --remote_access [--show] maintenance --remote_access [--enable] maintenance --remote_access [--racreset] maintenance --remote_access [--static_ip] [--ip <IPv4/IPv6 address>] [--netmask <netmask>] [--gateway <IPv4/IPv6 address>] [--device <lom1|lom2|lom3|lom4>] maintenance --remote access [--disable] maintenance --vdisk --check_consistency --type <boot|internal|external> [--service_tag <service tag>] maintenance --help
Managing DR Series System Storage Operations
System Storage Operation Commands Connection Container VTL NDMP iSCSI FC Replication Seed Schedule
Data Integrity Checking Additional Linux Commands

network --iperf_server [--port <number>] [--window_size <num bytes [KB/MB>]

Description

Tests network performance between a client and server using a designated port (use this command at the same time you use the other --iperf command).

Syntax

network --iperf_server --port 5001 --window_size 7KB

Result

-----------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 14.0 KByte (WARNING: requested 7.00 KByte)
-----------------------------------------------------------
[  7] local 10.20.21.23 port 5812 connected with 10.20.20.3 port 5001
[ ID]  Interval       Transfer     Bandwidth
[  7]  0.0-60.0 sec   398 MBytes   55.7 Mbits/sec

network --help

Syntax

network --help

Result

network --show [--bondif <bond0,bond1,...,bondN>]
                 [--nwif <eth0,eth1,...,ethN>]
                 [--hosts]
                 [--routes] 
                 [--interface <bondN|ethN>]

        network --delete [--bondif <bond0,bond1,...,bondN>]
                 [--member <eth0,eth1,...,ethN>]
                 [--nwif <eth0,eth1,...,ethN>]

        network --restart

        network --setdhcp [--bondif <bondN>]
                 [--nwif <ethN>]

        network --setstatic_ip [--bondif <bondN>]
                 [--nwif <ethN>]
                 --ip <IPv4/IPv6 address>
                 --netmask <netmask>
                 [--gateway <IPv4/IPv6 address>]

        network --create_bond --bondif <bondN>
                 [--dhcp]
                 [--static]
                 --nwif <eth0,eth1,...,ethN>
                 [--mode < ALB | 802.3ad >]
                 [--name < DNS name >]
                 [--mtu <Supported MTU range 512 - 9000>]
                 [--ip <IPv4/IPv6 address>]
                 [--netmask <netmask>]
                 [--gateway <IPv4/IPv6 address>]
                 [--restart]

        network --create_eth --nwif <ethN>
                 [--dhcp]
                 [--static]
                 [--name < DNS name >]
                 [--mtu <Supported MTU range 512 - 9000>]
                 [--ip <IPv4/IPv6 address>]
                 [--netmask <netmask>]
                 [--restart]

        network --add_member --bondif <bondN>
                 --nwif <eth0,eth1,...,ethN>

        network --setdns [--suffix <dns suffix>]
                 [--primary <IPv4/IPv6 address>]
                 [--secondary <IPv4/IPv6 address>]

        network --setbonding [--bondif <bondN>]
                 [--mode < ALB | 802.3ad >]
                 [--mtu <Supported MTU range 512 - 9000>]

        network --update [--bondif <bondN>]
                 [--nwif <ethN>]
                 [--mode < ALB | 802.3ad >]
                 [--name < DNS name >]
                 [--mtu <Supported MTU range 512 - 9000>]

        network --factory_reset [--auto_bonding_speed <1G|10G>]

        network --host [--add] [--ip <IPv4/IPv6 address>] [--name <host name>]
                 [--delete] [--ip <IPv4/IPv6 address>] [--name <host name>]

        network --route [--add] [--network <destination networks>] [--netmask <netmask>] [--gateway <gateway addresses>] [--interface <bondN|ethN>]
                 [--delete] [--network <destination networks>] [--netmask <netmask>] [--gateway <gateway addresses>] [--interface <bondN|ethN>]

        network --nslookup --destination <ip address | hostname>

        network --traceroute --destination <ip address | hostname>
                 [--interface <bondN|ethN>]

        network --ping --destination <ip address | hostname>
                 [--tries <number>]
                 [--size <number>]
                 [--interface <bondN|ethN>]

        network --blink --nwif <ethN>

        network --enable [--bondif <bond0,bond1,...,bondN>]
                 [--nwif <eth0,eth1,...,ethN>]

        network --disable [--bondif <bond0,bond1,...,bondN>]
                 [--nwif <eth0,eth1,...,ethN>]

        network --troubleshoot [--links]
                 [--gateway]
                 [--ntp]
                 [--dns]
                 [--active_domain]
                 [--nis]
                 [--clients]
                 [--port_mapper]
                 [--network_config]
                 [--show_active <NFS|CIFS|OST|RDS|NDMP|ISCSI|FC>]
                 [--interface <bondN|ethN>]

        network --tcpdump [--port <NFS|Windows|Replication|OST|RDA>]
                 [--pkt_size <128 - 32768>]
                 [--file_size <0 - 100>]
                 [--stop]
                 [--host <ip address list>]
                 [--interface <bondN|ethN>]

        network --iperf_client --server <ip address | hostname>
                 [--port <number>]
                 [--window_size <num bytes [KB/MB]>]
                 [--interval <num seconds>]
                 [--time <num seconds>]

        network --iperf_server [--port <number>]
                 [--window_size <num bytes [KB/MB]>]

        network --help

   network <command> <command-arguments>
   <command> can be one of:
                --show            Display network settings.
                --delete          Delete network interfaces(s).
                --restart         Restarts networking.
                --setdhcp         Configures bond interface to use DHCP.
                --setstatic_ip    Assigns a static IP address to the bond interface.
                --create_bond     Create bond interfaces for the machine.
                --create_eth      Create eth interfaces for the machine.
                --add_member      Add an interface to an existing bond.
                --setdns          Configures the Domain Name Servers.
                --setbonding      Updates bonding mode or MTU information.
                --update          Updates bonding and individual interface information.
                --factory_reset   Reset networking to factory configuration.
                --host            Manage local hosts.
                --route           Manage local routes.
                --nslookup        Looks up the IP address/hostname.
                --traceroute      Displays the packets route to network host.
                --ping            Sends ICMP ECHO_REQUEST to destination host.
                --blink           Blink LED on the specific ethernet device.
                --enable          Start the specific ethernet device(s) on restart.
                --disable         Don't start the specific ethernet device(s) on restart.
                --troubleshoot    Troubleshoots network issues.
                --tcpdump         Capture network traffic.
                --iperf_client    Run iperf (Network Performance) in client mode.
                --iperf_server    Run iperf (Network Performance) in server mode.

For command-specific help, please type network --help <command>
        eg:
            network --help show

OST

OST Command Usage

関連ドキュメント

The document was helpful.

評価を選択

I easily found the information I needed.

評価を選択