Chatta subito con l'assistenza

Ottieni assistenza in tempo reale
Completa la registrazione

Accedi

Richiedi prezzo

Contatta il supporto vendite

VERSIONI DI PROVA GRATUITA

Foglight APM for Real User Experience 5.9.10 - Installation and Setup Guide

Table of Contents

Installation overview

Introducing the monitoring architecture

Software components

Foglight Management Server Archiver Sniffer Browser Instrumentation Relayer Archiver databases

Ports used by Foglight APM

Appliance types Typical monitoring solutions

Monitoring physical networks Monitoring virtual networks Mixing physical and virtual appliances Adding Foglight APM to an existing Foglight installation

Installing physical appliances

Before you begin

Physical appliance components Other network components required Anatomy of an appliance

Planning an installation of physical appliances

Public network switch Private network switch for the capture subnet Network taps

Monitoring individual web servers Monitoring web server farms

Network information required for physical appliances

Installing appliances on a network rack Connecting appliances to the network Connecting Sniffers

Connecting Sniffers to network taps Connecting Sniffers to Archivers

Connecting one Sniffer to one Archiver Connecting Sniffers to Archivers

Starting physical appliances and configuring remote access Launching the Console Program remotely with DRAC

Installing virtual appliances

Monitoring multiple ESXi hosts

Monitoring multiple hosts through a centralized Sniffer Monitoring multiple hosts using local Sniffers Mixing virtual and physical appliances Scaling out a multiple host configuration Installing virtual appliances to monitor multiple hosts

Monitoring a single ESXi host

All-on-one-host variation Scalability Installing virtual appliances to monitor a single host

Before you begin

Software environment Foglight APM OVF templates Required port groups RAID configuration Network information for virtual appliances

Creating port groups on virtual switches

Configuring port groups on a distributed switch

Creating a Monitoring Network port group required by Sniffers Creating the Capture Network port group required by Sniffers and Archivers Creating a virtual adapter for the Capture Network port group

Configuring port groups on a standard switch

Deploying Foglight virtual templates Deploying the Foglight virtual Sniffer template Connecting virtual appliances on different servers Powering on virtual appliances

Setting up appliances

Logging in to the Console Program Enabling SSH and changing the default password Setting the date and time Specifying network settings Exiting the Console Program Launching Foglight Configuring software components

Working with appliance-hosted Management Servers

Configuring Management Server settings Configuring the Management Server to work with SSL keys

Creating a new SSL key for Foglight HTTPS access Using an existing SSL key for Foglight HTTPS access Configuring Foglight for secure remote LDAP access

Restricted file access Transferring support files from a physical appliance

Transferring files to Windows systems Transferring files to Linux systems

Troubleshooting appliance-hosted Management Servers Differences from working with server-hosted Management Servers

Setting up server-hosted Management Servers

Server requirements

Downloading and installing 256-bit encryption files Disabling the NetBIOS over TCP/IP setting

Installing Foglight APM cartridges Communicating with Sniffer and Archiver appliances Configuring Federated Children Enabling High Availability mode

Maintaining appliances

Launching the Console Program

Accessing physical appliances using SSH on Microsoft Windows systems Accessing physical appliances using SSH on UNIX systems

List of tasks available from the main menu Managing user accounts

Adding new user accounts Modifying user accounts and enabling SSH Removing user accounts

Modifying the time zone, time, or date Modifying the list of NTP servers for physical appliances Modifying network settings Shutting down appliances Rebooting appliances Updating software

Upgrading from a PKG file Displaying the upgrade log

Testing network settings Stopping and starting processes Reviewing the appliance system details and health status Reviewing the status of NIC devices Verifying monitored traffic by port Purging and resetting Archiver databases Creating support bundles Creating TCP dump files Accessing the home directory Creating Dell report archives on physical appliances

Backing up and restoring physical appliances

Setting up appliances as NetVault clients

Enabling an appliance's NetVault client Registering an appliance in NetVault

Running and restoring backups

Stopping Foglight and running a backup Restoring backups

Preparing a new appliance Restoring a backup

Appendix: Troubleshooting

Diagnosing Sniffer issues

Overview of the Sniffer test Running the Sniffer test Investigating and resolving issues in monitored traffic

Understanding packet drops with SPAN ports and aggregation network taps Expanding full partitions on virtual appliances

Expanding the size of virtual disks Expanding the size of partitions

Working with appliance-hosted Management Servers

The default Management Server settings may not suit all environments. For example, you may want to run the browser interface over an HTTPS port instead of the default port. This section describes how to configure Management Server settings on the appliance and highlights other things you should know about working with appliances.


	NOTE: If you are used to working with server-hosted Management Servers, see Differences from working with server-hosted Management Servers.

For more details, see the following topics:

•

Configuring Management Server settings

•

Configuring the Management Server to work with SSL keys

•

Restricted file access

•

Transferring support files from a physical appliance

•

Troubleshooting appliance-hosted Management Servers

•

Differences from working with server-hosted Management Servers

Configuring Management Server settings

You change default behavior by removing the comment symbol (#) from the relevant lines of code in the appliance.config file. The following table summarizes the things you can do by editing this configuration file and shows the affected lines of code.


	NOTE: The appliance.config file may be updated between releases. For the most up-to-date information, see the comments in the appliance.config file itself.

Table 10. Configuring Management Server settings
Task	Remove comment tags from code
Run the browser interface using HTTPS.	server.console.httpsonly = "true";
Run this Management Server as a Federated Child in a federated environment. For important information, see Configuring Federated Children.	server.federatedchild = "true";

To edit and save the configuration file:

1

Log into the Console Program.

2

Select Advanced Options, then Access Shell.

3

Type: vi /opt/quest/foglight/config.appliance/appliance.config

4

Edit settings as required.

5

Save your edits and exit the editor by pressing Esc and then typing :wq

6

Restart Foglight by typing: rcfoglight restart

Configuring the Management Server to work with SSL keys

You can configure the Management Server to work with SSL keys for the following functions:

•

Creating a new SSL key for Foglight HTTPS access

•

Using an existing SSL key for Foglight HTTPS access

•

Configuring Foglight for secure remote LDAP access

You must run these functions from the appliance’s command line shell. For details about how to log into the command line shell, see Accessing the home directory.

Creating a new SSL key for Foglight HTTPS access

To create a new SSL key for Foglight HTTPS access:

1

Create a certificate signing request (CSR) by running the following command:

/opt/quest/foglight/config.appliance/create_foglight_csr.sh <new CSR file>

2

Send the CSR file to a Certification Authority (CA) to be signed.

3

Securely copy (scp) the signed certificate to the appliance.

4

Import your signed certificate by running the following command:

/opt/quest/foglight/config.appliance/import_foglight_cert.sh <signed certificate file>

5

Verify the server.console.httpsonly = “true” entry is uncommented in the /opt/quest/foglight/config.appliance/appliance.config file.

6

Restart Foglight by typing: rcfoglight restart

Related Documents

The document was helpful.

Seleziona valutazione

I easily found the information I needed.

Seleziona valutazione