• Conviértase en un profesional en el portal de soporte
• Descargar
• Imprimir
• Mis descargas ()

• Soporte
• Documentación técnica
• Foglight for Storage Management Shared 4.6
• Foglight for Storage Management Shared 4.6 - Installation Guide

Foglight for Storage Management Shared 4.6 - Installation Guide

Navegación de contenido  

Getting Started

Introducing the Storage Monitoring Architecture

Foglight for Storage Management Components

Foglight for Storage Management Storage Collector Agent

Network Ports Used

Sizing Your Monitored Environment Ensuring System Requirements are Met

Small Environment System Requirements Large Environment System Requirements Requirements for Agent Managers

Installing or Enabling Foglight for Storage Management

Installing Foglight for Storage Management Enabling Foglight for Storage Management from Foglight for Virtualization EE Installed Dashboards and Cartridges

Dashboards Cartridges

Adding a Full License Renewing an Expired License

Configuring Agent Managers for Storage Collection

Installing External Agent Managers Creating a Lockbox for Foglight for Storage Management Credentials

Supporting an Environment with Separate Fabrics that have Duplicated WWNs Configuring Storage Collector Agents Configuring VMware Performance Agents Configuring Hyper-V Agents Assigning Foglight for Storage Management Roles Next Steps

Configuring Agents to Monitor Storage Devices

Brocade SAN Switches

Requirements for Brocade SAN Switches

Brocade Switches on FOS 7.0 or later Brocade Switches on earlier versions of FOS

Configuring Agents to Monitor Brocade SAN Switches

Cisco SAN Switches

Requirements for Cisco SAN Switches Ensuring that SSH is Enabled on Switches Configuring Agents to Monitor Cisco SAN Switches

Dell Compellent Arrays

Requirements for Dell Compellent Arrays Configuring Agents to Monitor Dell Compellent Arrays

Dell EqualLogic PS Series Array Groups

Requirements for Dell EqualLogic Arrays Configuring Agents to Monitor Dell EqualLogic Arrays

EMC CLARiiON CX Series Arrays (CLI)

Requirements for EMC CLARiiON CX Series Arrays (CLI) Configuring Agents to Monitor EMC CLARiiON CX Series Arrays (CLI)

EMC CLARiiON, VNX, or VMAX Storage Arrays (SMI-S)

Requirements for EMC CLARiiON or VNX Arrays (SMI-S) Requirements for EMC VMAX Arrays (SMI-S) Configuring Agents to Monitor EMC Storage Arrays (SMI-S) Configuring the SMI-S Provider for EMC CLARiiON or VNX Verifying Statistics Logging is Enabled on EMC Arrays

Enabling Statistics Logging Using Unisphere Enabling Statistics Logging Using Navisphere

EMC Isilon

Requirements for EMC Isilon Configuring Agents to Monitor EMC Isilon Arrays

EMC VPLEX

Requirements for EMC VPLEX Configuring Agents to Monitor EMC VPLEX Arrays

Hitachi Data Systems AMS, USP, and VSP

Requirements for Hitachi Data Systems AMS, USP, VSP Configuring Agents to Monitor Hitachi Data Systems AMS Configuring Agents to Monitor Hitachi Data Systems USP and VSP Arrays

HP EVA Storage Arrays

Requirements for HP EVA Storage Arrays Configuring Agents to Monitor HP EVA Storage Arrays

HP 3PAR Arrays

Requirements for HP 3PAR Arrays Enabling the SMI-S Provider Configuring Agents to Monitor HP 3PAR Arrays

NetApp Filers

Requirements for NetApp Filers Configuring Agents to Monitor NetApp Filers

Collection Target Support Matrix Configuration Procedures

Configuring Agents to Monitor Storage Devices Assigning Credentials

Creating and assigning new credentials Selecting and assigning an existing credential About releasing the Agent Manager lockbox

Resolving Connection Attempt Errors Configuring the Hitachi Tuning Manager Configuring Generic SMI-S Array Agent to Monitor Storage Devices

Managing Agents

Reviewing the Status of Configured Storage Collector Agents Reviewing Agent Alarms Editing Configured Agents

Reviewing Agent Status and Validating Connectivity

Validating Connectivity Properties Panel Port Property Path Property Status of Arrays

Managing Credentials

Editing existing credentials Removing a resource mapping from the Credentials dashboard

Managing Discovered Switches and Arrays

Brocade Discovered Targets Tab Arrays Discovered Targets Tab

Managing CLARiiON Domains and Arrays Managing the Hitachi Tuning Manager

Deploying Storage Agents after an Upgrade

• Visualización de Temas 9 - 12 de 104

×

Small Environment System Requirements

A small collection environment can typically have its storage collection handled by using the StorageCollector agents installed on the embedded Agent Manager that is available on the Foglight Management Server machine. The resource requirements shown below are the minimum needed for collection in a small environment.

 

NOTE: If scalability is important, use an external Agent Manager instead of the embedded Agent Manager. Follow the system requirements described in Large Environment System Requirements instead of these requirements.

Foglight for Storage Management (all components) on a 64-bit Windows or Linux Platform

 

Table 3. System Requirements

CPU	8-way 2.4 GHz CPUs — one of the following: • 2 quad core • 4 dual core • 8 single core
RAM	20 GB in total: • 10 GB for the Management Server • 6 GB for the Management Server Database Repository • 2 GB for the operating system • 2 GB for Agent Managers and agents and repository
Storage	Storage: • 20 GB for the Management Server • 100 GB for the Management Server Database Repository If using an embedded database repository: • Total of 140 GB on a RAID device available on the Management Server machine If using an external Database Repository: • 40 GB on a RAID device available on the Management Server machine • 100 GB on a RAID device for the external Database Repository

Databases must be regularly backed up and maintained to reduce wasted space.

Large Environment System Requirements

A large collection environment requires that the Agent Manager for the Storage Collector agents be installed on a server that is separate from the server running the Management Server. Requirements for both machines are outlined below. Refer to the System Requirements and Platform Support Guide for virtual machine and Agent Manager collection requirements.

 

Table 4. Management Server, Browser Interface, and Database Repository on a 64-bit Foglight-supported Platform

CPU	4-way 2.4 GHz CPUs — one of the following: • 1 quad core • 2 dual core • 4 single core
RAM	28 GB in total: • 16 GB for the Management Server • 8 GB for the Database Repository • 4 GB for the operating system
Storage	If using a built-in embedded Database Repository: • 220 GB, on a RAID device If using an external Database Repository: • For Management Server: 60 GB, on a RAID device • For Database Repository: 160 GB, on a RAID device

 

 

Table 5. Agent Manager on a 64-bit Windows or Linux Platform

CPU	4-way 2.4 GHz CPUs — one of the following: • 1 quad core • 2 dual core • 4 single core
RAM	6 GB in total: • 5 GB for Agent Manager and agents • 1 GB for operating system
Storage	30 GB on a RAID device

Databases must be regularly backed up and maintained to reduce wasted space.

Requirements for Agent Managers

Whether you use the embedded Agent Manager or external Agent Managers, you need to make sure that the hosting server meets the supported platform requirements. Agent Managers that are used for Foglight for Storage Management collections must be installed on a server running a supported 64-bit Linux operating system or a supported 64-bit Microsoft Windows operating system.

Foglight for Storage Management has been tested on the following environments.

 

Table 6. Test Environments

Operating System	Version	OS Architecture	Valid Installer
CentOS® Linux®	7.x	x86-64	fglam-<ver>-linux-x86_64.bin
Microsoft® Windows®	Server 2008	x86-64	fglam-<ver>-windows-x86_64.exe
	Server 2008RS Server 2012 Server 2012 R2	x86-64	fglam-<ver>-windows-x86_64.exe
Novell® SUSE Linux® Enterprise Server	11	x86-64	fglam-<ver>-linux-x86_64.bin
Red Hat® Enterprise Linux®	6.x	x86-64	fglam-<ver>-linux-x86_64.bin
Ubuntu® Linux	14.04.x LTS	x86-64	fglam-<ver>-linux-x86_64.bin

Installing or Enabling Foglight for Storage Management

Your next step depends on whether you already have Foglight for Virtualization, Enterprise Edition (Foglight for Virtualization EE) installed.

•	If Foglight for Virtualization EE is not installed, see Installing Foglight for Storage Management.

•	If Foglight for Virtualization EE is installed, see Enabling Foglight for Storage Management from Foglight for Virtualization EE.

Both options provide a trial license for Foglight for Storage Management.

This section covers the following topics:

•	Installing Foglight for Storage Management

•	Enabling Foglight for Storage Management from Foglight for Virtualization EE

•	Installed Dashboards and Cartridges

•	Adding a Full License

•	Renewing an Expired License

•  Anterior
• Visualización de Temas 9 - 12 de 104
• Siguiente 

Buscar este documento Buscar todos los documentos

×

 Bienvenido al portal de soporte

Puede encontrar ayuda de soporte en línea para el *producto* Quest en un sitio de soporte afiliado. Haga clic en Continuar para ser dirigido al contenido de soporte y a la asistencia adecuados para el *producto*.

Documentos relacionados

The document was helpful.

Seleccionar calificación

I easily found the information I needed.

Seleccionar calificación

© ALL RIGHTS RESERVED. Términos de uso Privacidad Cookie Preference Center