| NOTE |
Options on this tab are not supported for BMR backups. BMR backups must be saved to remote storage locations and are configured on the Remote Storage tab. |
This tab includes the following elements:
Save Backups on the Recovery Manager console computer. Select this check box to save backup files on the Recovery Manager for Active Directory (RMAD) computer. Enter the location for backup files in the Primary Backup Path box. If you specify a UNC share, backup files will be streamed to that share via the RMAD computer.
Primary Backup Path. Use the provided space to specify format for paths and names of .bkf files where to store backups. The path format may include optional expressions that enable the automatic creation of subfolders. The file name format may also include expressions. For example, you might specify C:\DIRNAME\%COMPUTERNAME%\%DATETIME%. As a result, backups for different computers will be saved in separate subfolders. In addition, the file name of each backup will be composed of the date and time of the backup creation.
Expression. Click this button to specify optional path and file name notations in Backup file name format. You can choose the following expressions:
Default backup storage (%BACKUPS%). Path to the default backup storage folder. The default path is as follows: %AllUsersProfile%\Quest\Recovery Manager for Active Directory\Backups.
Domain (%DOMAIN%). Name of the home domain of the computer being backed up.
Computer name (%COMPUTERNAME%). Name of the computer being backed up.
Date and Time (%DATETIME%). Date and time of the backup creation.
Browse. Click this button to locate the folder where backups are to be stored.
Sample path and file name matching the specified format. View an example of the path and file name that matches the format string supplied in Primary Backup Path.
Additional backup path (optional). Select this checkbox to store a copy of each backup in an additional location.
Sample path and file name matching the specified format. View an example of the path and file name that matches the format string supplied in Additional backup path(optional).
As a result, copies of backups for different computers will be saved in separate subfolders. In addition, the file name of each backup will be composed of the date and time of the backup creation.
For each computer, delete all backups except the last <Number>. Select this check box to retain a number of backups for each computer. Specify the number of backups to maintain. It is recommended to configure a backup retention policy to maintain backups created in the last two weeks. If you create backups on a daily basis specify 14 to maintain backups for each domain controller for two weeks.
This check box can be selected only when RMAD stores backups separately. To ensure that RMAD does so, add the %DATETIME% expression to the path or file name in the Backup file name format box.
| IMPORTANT |
When the backup is triggered and a specified backup path is not available, no backup is created. The backup creation session will fail. |
This tab includes the following elements:
| NOTE |
The remote SMB share must be configured for BMR backups. You need to specify path to the SMB share in the following format ( |
Primary Backup path:. Use the provided space to specify format for paths and names of files where to store backups. If you want to store backups on remote computers, the path must include UNC names. The path format may include optional expressions that enable the automatic creation of subfolders. The file name format may also include expressions. For example, you might specify \\RemoteHost\ShareName\%COMPUTERNAME%\%DATETIME%.
Expression. Click this button to specify path and file name notations in Backup path or Alternative backup path (optional). You can choose the following expressions:
Domain (%DOMAIN%). Name of the home domain of the computer being backed up.
Computer name (%COMPUTERNAME%). Name of the computer being backed up.
Date and Time (%DATETIME%). Date and time of the backup creation.
Sample path and file name matching the specified format:. View an example of the path and file name that matches the format string supplied in Backup path or Alternative backup path (optional).
Additional backup path (optional). This option is not supported for BMR backups.
| IMPORTANT |
According to the Forest Recovery best practices, the RMAD Active Directory® backup should be stored on a domain controller. At the same time, the Additional backup path option allows you to store the same Active Directory® backup on remote backup storage. This can be useful if the DC is destroyed and you want to restore it from a BMR backup and the latest Active Directory® backup. The retention policy is applied to both backup paths. So, if you set it to 10, and you have both paths configured - it means that there will be 5 backups on DC and 5 backups on the remote storage. |
| NOTE |
The backup storage account is used to access all remote storage backup locations. Currently, separate access accounts are not supported. |
For each computer, delete all backups except the last:. Select this check box to retain a number of backups for each computer. Specify the number of backups to maintain. It is recommended to configure a backup retention policy to maintain backups created in the last two weeks . If you create backups on a daily basis specify 14 to maintain backups for each domain controller for two weeks.
This check box can be selected only when RMAD stores backups separately. To ensure that RMAD does so, add the %DATETIME% expression to the path or file name in the Backup file name format box.
| IMPORTANT |
When the backup is triggered and any specified backup path is not available, no backup is created. The backup creation session will fail |
This tab includes the following elements:
Enable a Secure Storage server. Select this check box to enable a Secure Storage server for a backup. After creation and saving of backup to primary storage locations, a copy of the backup will be saved to the Secure Storage server.
Select the radio button below Enable a Secure Storage server to choose the primary storage location for the backup file to be copied from. Select Copy backup from remote storage location to the selected Secure Storage server to pull the backup file from the remote storage location. Select Copy backup from local storage location to the selected Secure Storage server to pull backup file from the local storage location. If using both local and remote storage options for primary storage, the recommendation is to configure your Secure Storage server to communicate with the primary storage location closest for optimal network performance.
Copy backup from remote storage location to the selected Secure Storage server. Select the DNS name or IP address of a Secure Storage host.
Copy backup from local storage location to the selected Secure Storage server. Select the DNS name or IP address of a Secure Storage host.
Enable Cloud Storage and select Cloud Storage locations. Select this checkbox to enable Cloud Storage. After creation and saving of backup to primary storage locations, a copy of the backup will be made to the configured Cloud storage locations.
Select the checkbox for each registered Cloud Storage location to be used for this backup.
| NOTE |
Computer collections can also be selected on the Cloud Storage node. |
Access Credentials For Reading Data
| IMPORTANT |
Access credentials are required for reading backups on primary storage to copy to Secure Storage and Cloud Storage. There may be some cases where credentials have to be specified for both remote and local storage based on the types of primary and secondary storage configured for the computer collection. |
An account to read data from remote storage location. Select an account that has read permission to the remote storage location. This account will be used to read the backup from the remote storage location and copy to all secondary storage locations. The Secure Storage agent on the Secure Storage server and the Recovery Manager Cloud Upload service on the Recovery Manager console, use this account. If an account is incorrect and does not have the proper permissions, the copy of the backup to secondary storage will fail.
An account to read data from local storage location. Select an account that has read permission to the local storage location. This account will be used to read the backup from the local storage location and copy to all secondary storage locations. The Secure Storage agent on the Secure Storage server and the Recovery Manager Cloud Upload service on the Recovery Manager console, use this account. If an account is incorrect and does not have the proper permissions, the copy of the backup to secondary storage will fail.
| NOTE |
For Recovery Manager for Active Directory (RMAD) 10.1 or higher: Make sure that you use the Backup Agent version supplied with this release of Recovery Manager for Active Directory. |
The Agent tab is used to specify settings for Backup Agent and Forest Recovery Agent.
| Note |
To install Forest Recovery Agent, the account under which Recovery Manager Console is running must be added to the Builtin\Administrators domain local group. |
The elements of the Agent tab are defined as follows:
| Note |
You can configure Recovery Manager for Active Directory (RMAD) to back up data in an Active Directory® domain under a least-privileged user account and create a group named RMAD Backup Operators that will automatically grant the necessary permissions to back up data. See Using a least-privileged user account to backup data |
| Note |
Recovery Manager for Active Directory has deprecated support for a group managed service account (gMSA) to be specified as the account to connect to the backup agent for manually triggered backups. Managed service accounts will continue to be supported for scheduled backup tasks. In accordance with Microsoft®, it is recommended to not use a group managed service account (gMSA) for interactively initiated network connections such as Recovery Manager for Active Directory manually triggered backups. To enforce this recommendation and to address the vulnerability CVE-2023-21524 (https://msrc.microsoft.com/update-guide/vulnerability/CVE-2023-21524), Microsoft has limited the usages of managed service accounts with a Windows Update. By removing support for a gMSA to connect to the backup agent, this ensures an attacker does not exploit the RMAD backup agent to perform actions or access resources over the network. To utilize the benefits and security provided by a group managed service account (gMSA), we highly recommend that a gMSA account is used for the scheduled backup task. See Setting user account for scheduled tasks |
| Note |
It is highly recommended and best practice to use a preinstalled backup agent. With preinstalled backup agents, Recovery Manager for Active Directory does not have to store highly privileged domain admin credentials for agent installation, thus increasing security of the product installation. For Recovery Manager for Active Directory 10.3 or higher this option is selected by default for all new computer collections. |
When the check box Use preinstalled Backup Agent is selected the product will have the following behavior:
RMAD backs up only those computers where the Backup Agent is preinstalled manually.
RMAD does not automatically install the Backup Agent on the computers in the Computer Collection.
RMAD automatically installs the Backup Agent before backing up a computer where the agent is not preinstalled manually.
When the backup operation completes, Recovery Manager for Active Directory removes the automatically installed Backup Agent.
If the Backup Agent was manually preinstalled on the computer to be backed up, RMAD will use that agent to back up data on the computer. RMAD does not remove preinstalled Backup Agent after the backup operation completes
For more information on how to install, update, and uninstall the Backup Agent or discover the Backup Agent instances that were manually preinstalled in your environment, see Managing Backup Agent.
Automatically configure Windows Firewall. Select this check box to have RMAD automatically configure Windows Firewall on target Windows Server® 2008-based or Windows Server® 2012-based DCs, so that RMAD can back up these DCs.
Ensure Forest Recovery Agent is deployed. Select this check box if you want the application to verify whether Forest Recovery Agent is installed on each domain controller the Collection includes. The application reinstalls Forest Recovery Agent, if necessary. For more information, see Using Forest Recovery Agent.
© 2024 Quest Software Inc. ALL RIGHTS RESERVED. Términos de uso Privacidad Cookie Preference Center
