Migrator for Notes to Exchange 4.16.3

Navegación de contenido

Quest® Migrator for Notes to Exchange 4.16.3 About Migrator for Notes to Exchange What's New Known issues System requirements

Domino servers Microsoft Exchange servers SQL server MNE admin migration servers End-user desktops (if running the SSDM) Server hosting the SSDM scheduling utility web service

Upgrade and compatibility Product licensing Getting started with MNE

Upgrade and installation instructions

Post upgrade steps

More resources

Migrator for Notes to Exchange and Coexistence Manager for Notes community

Globalization About us

MNE admin migration servers

Table 5. Supported operating systems for migrations.
Operating systems supported for migration to...		Exchange 2019/2016/2013/2010	Microsoft 365
Windows Server 2019	64-bit	•	•
Windows Server 2016	64-bit	•	•
Windows Server 2012 or 2012 R2	64-bit	•	•
Windows 10	32-bit	•
Windows 10	64-bit	•	•
Windows 8	32-bit	•
Windows 8	64-bit	•	•
Windows Server 2008 SP2	32-bit	•
Windows Server 2008 SP2	64-bit	•
Windows Server 2008 R2	64-bit	•	•

Table 6. Other Requirements

Requirement

Description

Workstation hardware

•

Must be a separate machine from the Exchange server, but a member of the same domain as AD and Exchange.

•

Minimum hardware requirements:

•

2 GHz dual-core processor, 4GB memory, 20GB free disk space.

•

2 GHz quad-core processor, 8GB memory.

•

1 Gbps NIC, and 1 Gbps or faster network connections among all migration servers and the Exchange and Domino servers.

Required for all Exchange target types, including Microsoft 365

•

.Net Framework 4.8

•

Microsoft OLE DB Driver for SQL Server 18.2 (or later) or Microsoft SQL 2012 Native Client.

•

Microsoft Command Line Utilities for SQL Server (a free download from the link provided in the MNE Autorun).

NOTE: This component is required only if SQL Server is not installed locally (i.e. the MNE Server is connecting to a remote SQL instance).

•

Windows PowerShell 3.0, which is part of Windows Management Framework 3.0 (included with any MNE-supported OS except pre-SP1 editions of Windows Server 2008 R2). If PowerShell 3.0 does not come with your OS, you can download Windows Management Framework 3.0 at this Microsoft link.

•

Notes must be installed in single-user mode and configured. The Notes client version must be one of 6.0.0-12.0.1 (all ranges inclusive), and should match or be higher than the Domino server version.

•

The 32-bit edition (only) of Outlook 2019, 2016, 2013 or 2010. The Outlook client must also conform to the Microsoft version requirements for the applicable Exchange target version. Outlook 2010 is not supported by Microsoft 365 or Exchange 2019. See the Exchange Server supportability matrix for more details.

•

The MAPI DLLs required to perform a migration must be those that are part of Outlook, not the downloadable Exchange "server" MAPI.

•

Update for Universal C Runtime in Windows. See the Microsoft knowledge base article KB2999226.

Also required for Microsoft 365 target

•

To use modern authentication when connecting to Microsoft 365 using remote PowerShell, the Microsoft Exchange Online Remote PowerShell module must be installed. For more information, see To install Exchange Online Remote PowerShell V2 Module.

•

Microsoft Graph SDK v1.0 PowerShell module - GA version. See the following website for installation details: https://learn.microsoft.com/en-us/powershell/microsoftgraph/installation?view=graph-powershell-1.0

NOTE: The Microsoft Graph SDK v1.0 PowerShell module replaces the deprecated Azure AD PowerShell module that Microsoft will not support.

•

For systems running Windows 2008 R2, TLS 1.2 must be enabled as the default secure protocol. See this Microsoft support page.

To install Exchange Online Remote PowerShell V2 Module

Install or update the Microsoft PowerShellGet module. For details, see Installing PowerShellGet.

Close and re-open the window.

Now you can use the Install-Module cmdlet to install the EXO V2 module from the PowerShell Gallery. Typically, you want the latest public version of the module.

NOTE: Version 2.0.5 and earlier is known as the Exchange Online PowerShell V2 module (abbreviated as the EXO V2 module). Version 3.0.0 and later is known as the Exchange Online PowerShell V3 module (abbreviated as the EXO V3 module).

To install the latest EXO V2 version supported by MNE in this release, run the following command:

Install-Module -Name ExchangeOnlineManagement -RequiredVersion 2.0.5

Windows Remote Management (WinRM) on your computer must allow basic authentication (enabled by default).

To verify that basic authentication is enabled for WinRM, run the following command in a Command Prompt:

winrm get winrm/config/client/auth

If you don't see the value Basic = true, run the following command to enable basic authentication for WinRM:

winrm set winrm/config/client/auth @{Basic="true"}

Important: Avoiding permission conflicts

If you are migrating to an on-premises Exchange server, it is important to ensure that the Exchange administrator account used by MNE to perform the migration does not belong to the Domain Admins or the Enterprise Admins security group, or to the Organization Management role group.

Since these groups are denied Receive As rights on all mailbox databases, adding the Exchange account to any of these groups will result in conflicting permissions. These conflicting permissions have always had the potential to cause issues, but due to changes in how MNE connects to the target mailboxes, it is more likely that the conflicting permissions will prevent the new version of MNE from connecting to the mailboxes that are the migration targets.

Best Practices for Microsoft 365 Multi-Geo tenants

For Microsoft 365 Multi-Geo tenants, the Administrator accounts used for migration must be in the same geographical region as the target mailboxes to avoid permission access issues due to GDPR compliance requirements. (220431)

End-user desktops (if running the SSDM)

An SSDM end-user workstation can be a virtual machine, but a dedicated physical machine will likely yield better migration performance.

Table 7.

Requirement

Description

Supported operating systems

•

Windows 10, Windows 8.1, or Windows 8, 32-bit or 64-bit edition.

•

Windows Server 2019: 64-bit edition.

•

Windows Server 2016: 64-bit edition.

•

Windows Server 2012 or 2012 R2: 32-bit or 64-bit edition.

•

Windows Server 2008 SP2 or 2008 R2: 32-bit or 64-bit edition.

Required Outlook client

Outlook 2019, 2016, 2013, or 2010: 32-bit or 64-bit edition.

The Outlook client must also conform to Microsoft's version requirements for the applicable Exchange target version. Outlook 2010 is not supported by Microsoft 365 or Exchange 2019. See the Exchange Server supportability matrix for more details.

On each end-user SSDM desktop

Microsoft .Net Framework version 2.0 or later must be installed.

If end users will run the SSDM application from a network share (rather than from each user's own local copy):
Each workstation must also have either .Net 3.5 SP1 (or later) installed, or a Code Access Security (CAS) policy granting full trust to SSDM in the network share. (See “Before Running the SSDM” in chapter 4 of the MNE Scenarios Guide for instructions to set the required CAS policy.)

For the SSDM to authenticate with Microsoft 365 using Modern Authentication, .Net 4.8 or later must be installed. If .Net 4.8 or later is not installed, the SSDM falls back to migrating without Modern Authentication.

The MAPI DLLs required to perform a migration must be those that are part of Outlook, not the downloadable Exchange "server" MAPI.

Required Notes client

•

12.0.0 or 12.0.1 (inclusive)

•

11.0.0 or 11.0.1 (inclusive)

•

10.0.0 or 10.0.1 (inclusive)

•

9.0.0 or 9.0.1 (inclusive)

•

8.5.0–8.5.3 (inclusive)

•

8.0.0–8.0.2 (inclusive)

•

6.0.0–7.0.4 (inclusive)

SmartCloud Notes support

MNE provides partial support for migrations from SmartCloud Notes via the SSDM, for Notes client versions 8.5.3 or newer. This feature also requires that you configure your local Notes client for SmartCloud Notes, as described in the MNE Pre-Migration Planning Guide, in chapter 1 under “Configuration requirements and account permissions”.

Server hosting the SSDM scheduling utility web service

ASP.net version 4.8 must be installed. If the SSDM Scheduling Web Service is running, you must change the .NET Framework version of the Application Pool used by the SSDM Scheduling Web Service to .NET 4.8.

Upgrade and compatibility

There is no need to uninstall a previous version before installing a new version. The upgrade installation and setup are fully automated, and will preserve any data already migrated by an earlier version, so you may simply resume the migration process from wherever you left off with the previous version.


	IMPORTANT: If you are upgrading from 4.14.1 or earlier, you must back up the SSDM Scheduling Administration utility configuration files. See the section below for information on backing up the files.
	IMPORTANT: The upgrade process will back up your existing pabreplicator.nsf, attrs.tsv, msgtypes.tsv, NMEPSErrorFile.xml, wte_template.htm, ybm_template.htm and ynma_template.html files and copy them to the target installation folder.