Use the sp-bininfo utility to verify that a new release of SharePlex includes past one-off builds of SharePlex that you received from Support between GA releases.
The output shows the following for each one-off that is installed for your current version of SharePlex:
Figure 2: Sample sp-bininfo output
(6) sp_ocap:
build 171 of SharePlex_Oracle (ONEOFF-CR123456-CR654321-CR789102-oracle110) 8.6.3 for rh-40-amd64 by jdoe
SharePlex shared lib(s):
libspwildcard.so.8.6.3.47
libsporacle.so.8.6.3.47
libsporalog.so.8.6.3.47
libspshareplex.so.8.6.3.47
libspspo.uname.so.8.6.3.47
libspdb.so.8.6.3.47
libspodb.so.8.6.3.47
libspspo.typecheck.so.8.6.3.47
libspcore.so.8.6.3.47
libspext.so.8.6.3.47
libspspo.memory.impl.so.8.6.3.47
libspspo.memory.stub.so.8.6.3.47
libspspo.shim.so.8.6.3.47
libspspymdb.so.8.6.3.47
Not applicable
Linux and Unix
Run the sp-bininfo utility from the util subdirectory of the product directory of your current SharePlex installation.
$ cd path_to_SharePlex_proddir/util
$ ./sp-bininfo
Use the sp_wallet utility to provide the Oracle Wallet password to SharePlex. SharePlex uses the wallet password to access the TDE Master Encryption Key. SharePlex uses the TDE Master Encryption Key to decrypt TDE-protected data in the redo log that must be replicated.
Grant read permission on the Oracle Wallet file to the dba group before using sp_wallet.
Oracle on Unix, Linux, and Windows
To run sp_wallet and manually supply the password
On the source system, start SharePlex from the SharePlex product directory. You are prompted to run sp_wallet.
*** To enable TDE replication, run sp_wallet and provide the wallet password ***
Run sp_wallet.
./sp_wallet [-r port_number]
Important! On Windows, if you installed SharePlex on any port other than the default of 2100, use the -r option to specify the port number. For example, in the following command the port number is 9400:
./sp_wallet -r 9400
wallet password: walletpw
Wallet loaded into SharePlex
To run sp_wallet in auto-open mode
If you are using an auto-open wallet, you can configure SharePlex to open the TDE wallet automatically. This eliminates the need to run sp_wallet manually at SharePlex startup. The syntax is:
./sp_wallet --auto-open [-r port_number]
Important! Using the auto-open wallet feature has additional security considerations. See the Oracle documentation for more information. In addition, do not back up the SharePlex variable-data directory together with the Oracle wallet and the Oracle data files.
To cancel auto-open mode
./sp_wallet --no-auto-open [-r port_number]
To change the TDE master encryption key
If you need to change the TDE Master Encryption Key while a SharePlex configuration is active, take the following steps to ensure that SharePlex continues to replicate the TDE-protected data after the changes.
Run the sp_wallet utility to provide SharePlex with the new TDE Master Encryption Key.
./sp_wallet [-r port_number]
Use the sp_security utility to enable, disable or view the SSL/TLS settings for SharePlex network communication.
IMPORTANT! SSL/TLS must be either enabled with a common network password or disabled on all SharePlex installations.
To enable SSL/TLS
Run “sp_security --setup”, select the SSL/TLS option, and then enter a network password.
% sp_security --setup Security Setup Wizard --------------------- This wizard will walk you through setting up the SharePlex network security. Setup configuration for '/home/shareplex/var110/' and Port 2100 [N]: Y Choose your network security model. Please note the following: * Cop must be down when the security model is changed, or when the network password is changed * The same model must be used among all SharePlex nodes replicating to each other * For security model [1], the same network password must be set on all SharePlex nodes replicating to each other [1] Use basic SSL/TLS connections [2] Use non-SSL/TLS connections (default prior to SharePlex 9.1.3) Security model: 1 Please enter a network password that will be used for authentication among the SharePlex nodes. All SharePlex nodes that replicate data to each other must have the same network password. Network password: Please re-enter the network password Network password: Security settings: Configuration for '/home/shareplex/var110/' and Port 2100: Security model : SSL/TLS Network password : stored for unattended startup SSL key file password : stored for unattended startup SSL key file : key.pem SSL cert file : cert.pem Setup complete!
IMPORTANT! SSL/TLS must be either enabled with a common network password or disabled on all SharePlex installations.
To disable SSL/TLS
Run “sp_security --setup” and select non-SSL/TLS connections.
% sp_security --setup Security Setup Wizard --------------------- This wizard will walk you through setting up the SharePlex network security. Setup configuration for '/home/shareplex/var110/' and Port 2100 [N]: Y Choose your network security model. Please note the following: * Cop must be down when the security model is changed, or when the network password is changed * The same model must be used among all SharePlex nodes replicating to each other * For security model [1], the same network password must be set on all SharePlex nodes replicating to each other [1] Use basic SSL/TLS connections [2] Use non-SSL/TLS connections (default prior to SharePlex 9.1.3) Security model: 2 Security settings: Configuration for '/home/shareplex/var110/' and Port 2100: Security model : Un-encrypted Setup complete!
To view the current SSL/TLS configuration
Run “sp_security --show”.
% sp_security --show Security settings: Configuration for '/home/shareplex/var110/' and Port 210: Security model : Un-encrypted
SharePlex provides three interactive scripts that you can run in SQL*Plus to manage triggers so that they do not interfere with replication. Review the following points before you run the scripts.
To run the trigger scripts, you must have access to both the SYS and DBA objects. If the SharePlex database account was set up properly during installation, that account has this access.
The scripts reside in the util sub-directory of the SharePlex product directory.
Oracle on supported platforms
Use sp_add_trigger.sql when you cannot disable triggers on target objects, such as for peer-to-peer and high-availability configurations. This script changes the triggers so that they ignore the SharePlex Oracle user associated with the Post process, but fire for all other users. It inserts the following WHEN clause into each trigger in the database.
when user != ‘SharePlex_username’ begin
The script prompts for the SharePlex user name, and then it modifies the triggers. It does not modify triggers belonging to SYS, SYSTEM, and SCOTT.
@absolute_pathname/sp_add_trigger.sql
Use sp_change_trigger.sql to replace the name of the SharePlex user in the WHEN clause that was created with sp_add_trigger.sql. It prompts for the current SharePlex user name and for the new user name. Change the SharePlex user in Oracle before you run this script.
@absolute_pathname/sp_change_trigger.sql
Use sp_remove_trigger.sql to remove the WHEN clause created with sp_add_trigger.sql. It prompts for the SharePlex user name and then automatically removes the WHEN clause from all of the triggers. Use this script if you no longer will be replicating to those tables. If you continue to use SharePlex to replicate to those tables without disabling the triggers, the triggers will fire when SharePlex posts data, and SharePlex will generate out-of-sync errors.
@absolute_pathname/sp_remove_trigger.sql
© ALL RIGHTS RESERVED. Términos de uso Privacidad Cookie Preference Center