NetVault 12.2 - Administration Guide for Managed Service Providers

Table 118. Events types
Event class	Event type	Description
Audit	Failed to Update Audit File	Occurs when NetVault Backup is unable to update the audit logs.
	Update Session Map Failed	Occurs when NetVault Backup is unable to update the session owner mapping file.
DR Appliance	Container Created	Occurs when a container is created on a Quest DR Series system.
	Container Deleted	Occurs when a container is deleted from a Quest DR Series system.
Device	Check	Occurs when a request is received to check a device.
	Check Serial Number of Drive	Occurs when a request is received to check the serial number of a drive.
	Check Serial Number of All Drives	Occurs when a request is received to check the serial numbers of all drives.
	Close Door	Occurs when a request is received to close a library door
	Close EEPort	Occurs when a request is received to close an entry/exit port.
	Close EEPort Clean	Occurs when a request is received to close an entry/exit port containing cleaning media.
	Device Forced Offline	Occurs when the offline command is selected for a device.
	DR Devices Marked Orphan	Occurs when a DR device is marked as orphan.
	Device Gone Offline	Occurs when a device becomes offline.
	Drive Unavailable	Occurs when a drive becomes offline.
	Library Gone Offline	Occurs when a library becomes offline.
	Library Scan Completed	Occurs when a media scan request is completed.
	Map	Occurs when an ACSLS drive is mapped.
	No Suitable Drive	Occurs when NetVault Backup is unable to find a suitable drive to run a backup or restore job.
	Open Door	Occurs when a request is received to open a library door.
	Open EEPort	Occurs when a request is received to open an entry/exit port.
	Reconfigure Device	Occurs when a device is modified.
	Remove	Occurs when a device is removed.
	Restart Library	Occurs when a library is restarted.
	Synchronize Silo Media	Occurs when silo media items are synchronized.
	Unmap	Occurs when an ACSLS drive is un-mapped.
	Update Serial Number of Drive	Occurs when a request is received to update the serial number of a drive.
	Update Serial Number of all Drives	Occurs when a request is received to update the serial number of all drives.
Job	All Job Retries Failed	Occurs when all retry attempts for a job have failed.
	Job Abort Requested	Occurs when a request is received to abort a job.
	Job Aborted	Occurs when a job is aborted.
	Job Completed Successfully	Occurs when a job completes successfully.
	Job Completed with Warnings	Occurs when a job completes with warnings.
	Job Created	Occurs when a job is created.
	Job Deleted	Occurs when a job is deleted.
	Job Died	Occurs when a job terminates unexpectedly.
	Job Failed	Occurs when a job fails.
	Job Finished	Occurs when a job is completed.
	Job Hold	Occurs when a job is put on hold.
	Job Modified	Occurs when a job is modified.
	Job Phase Starting	Occurs when phase 1 or phase 2 starts for a job.
	Job Resume	Occurs when a job that was placed on hold is resumed.
	Job Retry Scheduled	Occurs when a job is rescheduled after a failed attempt.
	Job Run Now	Occurs when a job is submitted to run immediately.
	Job Scheduled	Occurs when a job is submitted.
	Job Stop Requested	Occurs when a request is received to stop a job.
	Job Stopped	Occurs when a job is stopped.
	Media Quota Exhausted	Occurs when tenant has exhausted all the allocated storage limit
	Media Quota Low	Occurs when tenant has exhausted 80 percent of the allocated storage limit.
	Scheduled Phase Deleted	Occurs when a scheduled phase is deleted for a job.
	Set Created	Occurs when a set is created.
	Set Deleted	Occurs when a set is deleted.
	Set Modified	Occurs when a set is modified.
Licensing	License Exceeded	Occurs when usage exceeds the available licenses.
	License Expiring	Occurs when the evaluation license is nearing expiry or has expired. This event occurs when the validity period for the evaluation license is less than or equal to seven days.
Log Daemon	Home Drive Becoming Full	Occurs when disk space usage reaches warning or critical threshold.
Machines	Client Added	Occurs when a NetVault Backup Client is added to the domain.
	Client Down	Occurs when a NetVault Backup Client becomes offline.
	Client Group Created	Occurs when a client group is created.
	Client Group Deleted	Occurs when a client group is deleted.
	Client Group Modified	Occurs when a client group is modified.
	Client Group Renamed	Occurs when a client group is renamed.
	Client Removed	Occurs when a client is removed.
	Virtual Client Added	Occurs when a cluster-aware plug-in is installed on the server. For more information about virtual clients and cluster-aware plug-ins, see Working with client clusters.
	Virtual Client Removed	Occurs when a cluster-aware plug-in is removed. For more information about virtual clients and cluster-aware plug-ins, see Working with client clusters.
Media	Blank	Occurs when a request is received to blank a media item.
	Delete Group	Occurs when a media group is deleted.
	Delete Job Instance	Occurs when a job instance is deleted.
	Export	Occurs when a piece of media is exported to an entry/exit port.
	Import	Occurs when a request is received to import a piece of media.
	Import Clean	Occurs when a request is received to import a cleaning tape.
	Label	Occurs when a label is assigned to a piece of media.
	Load	Occurs when a piece of media is loaded into a drive.
	Media Blanked	Occurs when a piece of media is blanked.
	Media Deleted	Occurs when a piece of media is removed from the NetVault Database.
	Media Full	Occurs when a piece of media becomes full.
	Media Labeled	Occurs when a media label request is completed.
	Media Loaded	Occurs when a media load request is completed.
	Media Marked Bad	Occurs when a piece of media is marked bad.
	Media Request Change Priority	Occurs when a media request priority is changed.
	Media Request Timeout Expired	Occurs when a media request has timed out for a backup job. This event occurs when NetVault Backup is unable to find suitable media within the specified timeout interval.
	Media Suspect	Occurs when a piece of media is marked suspect.
	Media Unexpectedly BLANK	Occurs when a piece of media is found to be unexpectedly BLANK when it is selected for use.
	Media Unloaded	Occurs when a piece of media is unloaded.
	Media Unusable	Occurs when a drive rejects a piece of media.
	No Suitable Media	Occurs when NetVault Backup is unable to find a suitable media to complete the backup job.
	Request Off Hold	Occurs when a media request is taken off hold.
	Request On Hold	Occurs when a media request is placed on hold.
	Reuse	Occurs when a piece of media is marked for re-use.
	Scan Request	Occurs when a request is received to scan a foreign media.
	Unload	Occurs when a piece of media is unloaded.
	Update Properties	Occurs when media properties are modified.
Media Database	Backup Added	Occurs when a backup record is added to the Media Database.
	Backup Deleted	Occurs when a backup record is deleted from the Media Database.
	Backup Modified	Occurs when a new backup record is modified.
	Backup Retired	Occurs when a saveset is retired and its information is deleted from the NetVault Database.
	Index Compressed	Occurs when a backup index is compressed.
	Index Compression Failure	Occurs when NetVault Backup fails to decompress a backup index due to insufficient disk space.
	Index Loaded	Occurs when an offline index is temporarily loaded.
	Index Offlined	Occurs when the backup index for a saveset is deleted from the NetVault Database.
	Index Offlining Failure	Occurs when NetVault Backup fails to delete the backup index for a saveset from the database.
	Index Read Failure	Occurs when NetVault Backup fails to read the index for a saveset.
	Index Uncompressed	Occurs when a backup index is de-compressed.
	Media Database Check Failed	Occurs when the database integrity or reference check fails for the Media Database.
	Media Database Check Passed	Occurs when the Media Database check completes successfully.
	Media Database Check Passed with Warnings	Occurs when the Media Database check generates warnings.
	Modify Backup Expiry	Occurs when the retirement period is modified for a saveset.
NetVault Time	No Time Source	Occurs when a NetVault Time Server is not configured for the Domain.
	Server Time Inconsistency	Occurs when the NetVault Time on two or more controlling servers do not match. (This event can occur when a client is added to two or more NetVault Backup Servers.)
	Server Time Unknown	Occurs when the Time Server is unable to fetch NetVault Time from the Source.
	Time Server Changed	Occurs when the Time Server is changed for a NetVault Backup Domain.
	Time Server Not Responding	Occurs when the Time Server is not responding to a time request.
	Time Server Removed	Occurs when the Time Server is removed from the NetVault Backup Domain.
Policy	Policy Branch Errors Acknowledged	Occurs when policy branch errors or warnings are acknowledged.
	Policy Created	Occurs when a policy is created.
	Policy Deleted	Occurs when a policy is deleted.
	Policy Errors Acknowledged	Occurs when policy errors or warnings are acknowledged.
	Policy Modified	Occurs when a policy is modified.
	Policy Quiesce	Occurs when a request is received to quiesce a policy.
	Policy Quiesced	Occurs when a policy is placed in a quiesced state.
Scheduler Database	Scheduler Database Check Failed	Occurs when the database integrity or reference check fails for the scheduler database.
	Scheduler Database Check Passed	Occurs when the Scheduler Database check is completed successfully.
	Scheduler Database Check Passed with Warnings	Occurs when the Scheduler Database check generates warnings.
Stats Collection	Cache Too Small	Occurs when cache memory is running low for the Statistics Manager; this would result in the process running slowly.
	Cannot Accept Records	Occurs when the Statistics Manager refuses to accept data from other processes.
	Lost Server	Occurs when the Statistics Manager discards the I/O data collected for a server on polling timeout.
	Stats Manager Ready	Occurs when NetVault Backup starts the Statistics Manager.

Role-based access to view events

Table 119. View event role-based access
Event Class	MSP administrator	Tenant administrator	Tenant User
Audit	X	X	X
DR Appliance	X
Device	X
Job	X	X	X
Licensing	X
Log Daemon	X	X	X
Machines	X	X	X
Media	X
Media Database	X
NetVault Time	X	X	X
Policy	X	X	X
Scheduler Database	X	X	X
Stats Collection	X	X	X

Viewing event logs

You can view the event log messages from the View Events page.

To view event logs:

In the Navigation pane, click View Events.

On the View Events page, you can view the following information:

•

Date: Date and time when the event was raised

•

Class: Event class

•

Event: Event type

•

Message: Detailed log message or description

By default, the table is sorted by Date (newest to oldest).

You can sort the table by one or more columns, as required. For more information, see Sorting records in NetVault Backup WebUI.

To set the filter options (For more information on table filter options for View Events page, see Table 9), view the page size setting, column sort order, applied filters in the table, export the records, or edit table settings, click the icons at the lower- right corner of the table.

For more information, see Customizing tables in NetVault Backup WebUI.

You can use the Search option to filter the table data and quickly find entries that contain the specified string in any column values. You can also include wildcards (“?” or “*”) in the search filter string. Type the search text into the box and click the tick icon or press Enter.

The View Events page loads a maximum of 10,000 records initially. The total number of records fetched is displayed at the lower-right corner of the table. You can click Load more to load the next set of records, if available. Each load action fetches a maximum of 10,000 records. This button is disabled if there are no more records to load.

To stop or resume live updates, click the Pause or Resume Live Updates button.

To perform a logs-related task, click the corresponding button in the Operations pane. Alternatively, click a link in the Navigation pane to open a different page.


	NOTE: Only MSP administrator can create custom notifications on NetVault Backup Server.

Documentos relacionados

The document was helpful.

Seleccionar calificación

I easily found the information I needed.

Seleccionar calificación

Seleccione su producto:

Con el fin de ofrecerle un mejor servicio, complete el campo Motivo del chat:

Soluciones recomendadas para su problema

NetVault 12.2 - Administration Guide for Managed Service Providers

Event classes

Events types

Role-based access to view events

Viewing event logs