DR Series Software 4.0.3.1 - Command Line Reference Guide

Chat now with support

Alerts Command Usage alerts --show [--email] alerts --show [--snmp] alerts --show [--events] [--index <[-]number> [--count <number>] [--all] alerts --show [--alerts] [--index <[-] number>] [--count <number>] [--all] alerts --show [--summary] alerts --email [--relay_host <server name>] alerts --email [--appliance_alerts <yes | no>] alerts --email [--software_updates <yes | no>] alerts --email [--daily_report <yes | no>] alerts --email [--daily_report_time <0–24 hr>] alerts --email [--sender_email <email address>] alerts --test_email alerts --snmp_add --host <server name> --port <number> --community <name> alerts --snmp_delete --host <server name> alerts --snmp_disable --host <server name> alerts --snmp_enable --host <server name> alerts --snmp_trap_email [--enable] [--disable] alerts --help

Authenticate Commands

Authenticate Command Usage authenticate --show [--users] authenticate --show [--domain <domain name>] authenticate --show [--login_group] authenticate --join --domain <domain name> [--ou <org-unit name>] --user <user name> authenticate --leave [--user <user name>] [--force] authenticate --update --kerberos authenticate --add [--user <user name>] authenticate --add [--login_group <DOMAIN\LOGIN GROUP>] authenticate --delete--user <user name> authenticate --delete [--login_group <DOMAIN\LOGIN GROUP>] authenticate --set --user <user name> authenticate --guestmode [--enable] [--disable] authenticate --guestmode [--enable] authenticate --guestmode [--disable] authenticate --server_signing --mode <auto | mandatory | disabled> authenticate --help

Network

Network Command Usage network --show network --delete network --restart network --setdhcp network --setstatic_ip [--bondif <bondN>] [--nwif <ethN>] --ip <IPv4/IPv6 address not already in use> --netmask <netmask> [--gateway <IPv4/IPv6 address>] network --create_bond network --create_eth network --add_member network --setdns [--suffix <dns suffix>] [--primary <IPv4/IPv6 address>] [--secondary <IPv4/IPv6 address>] network --setbonding --bondif <bondN> [--mode <ALB | 802.3ad>] [--mtu <supported MTU range 512 - 9000>] network --update network --factory_reset network --host network --route network --nslookup --destination <ip address | hostname> network --traceroute --destination <ip address | hostname> network --ping --destination <ip address | hostname> [--tries <number>] [--size <number>] [--interface <bondN | ethN>] network --blink network --enable network --troubleshoot [--links] [--gateway] [--ntp] [--dns] [--active_domain] [--nis] [--clients] [--port_mapper] [--network_config] [--show_active <NFS|CIFS|OST|RDS|NDMP|ISCSI|FC>] [--interface <bondN | ethN>] network --troubleshoot --gateway --interface <bondN | ethN> network --troubleshoot [--show_active <NFS| CIFS|OST|NDMP|ISCSI|RDS>] network --tcpdump [--port <nfs | windows | replication | ost | rds>] [--pkt_size <128 - 32768>] [--file_size <0 - 100>] [--stop] [--host <ip address list>] [--interface <bondN | ethN>] network --tcpdump [--pkt_size <128 - 32768>] network --tcpdump [--file_size <0 - 100>] network --tcpdump [--host <ip address list>] network --tcpdump [--port <nfs | windows | replication | ost | rds>] network --iperf_client --server <ip address | hostname> [--port <number>] [--window_size <num bytes [KB/MB]>] [--interval <num seconds>] [--time <num seconds>] network --iperf_server [--port <number>] [--window_size <num bytes [KB/MB>] network --help

OST

OST Command Usage ost --show [--config] [--file_history] [--name <name>] [--active_files] [--name <name>] [--clients] [--limits] ost --update --opdup_encryption <none | aes128 | aes256> ost --delete_client --name <OST Client Hostname> ost --update_client --name <OST Client Hostname> --mode <auto | passthrough | dedupe> ost --limit --speed <<num><KBps | MBps | GBps | default> --target <ip address | hostname> ost --partial_images --containerid <Container id> [--delete <Partial image path>] [--timeout <> 0>] ost --help

RDA

RDA Command Usage rda --show [--config] [--file_history] [--name <name>] [--active_files] [--name <name>] [--clients] [--limits] rda --update --opdup_encryption <none | aes128 | aes256> rda --delete_client --name <RDA Client Hostname> rda --update_client --name <RDA Client Hostname> --mode <auto| passthrough| dedupe> rda --limit --speed <<num><KBps| MBps| GBps> | default> --target <ip address | hostname> rda --partial_images --containerid <Container id> [--delete <Partial image path>] [--timeout <> 0>] rda --help

Stats

Stats Command Usage stats --system stats --cpu stats --memory stats --network stats --datacheck stats --nfs stats --cifs stats --ost stats --rds stats --ndmp stats --ndmp_completed stats --iscsi [--verbose] stats --fc [--iostat] [--linkstat] stats --container --name <name> stats --storage_group --name <name> stats --replication [--name <name>] stats --cleaner stats --clients [--type <NFS|CIFS|OST|RDS|NDMP|ISCSI|FC>] stats --reset [--nfs] [--cifs] [--ost] [--rds] [--datacheck] stats --reset --datacheck stats --seed stats --help stats --datacheck stats --datacheck Command Usage stats --help datacheck

Storage Group commands

Storage Group Command Usage storage_group --show [--name <name>] [--verbose] storage_group --add --name <name> [--compression_mode <fast|best>] storage_group --update --name <name> [--compression_mode <fast|best>] storage_group --encryption --name <name> [--set <ON | OFF>] [--mode <static|internal> <--interval <7 days to 70 years>] storage_group --setpassphrase --name <name> storage_group --delete --name <name> storage_group --help

System

System Command Usage system --show [--config] system --show [--hardware] system --show [--storage] [--type <boot | internal | external>] [--service_tag <service tag>] system --show [--storage] system --show [--license] [--verbose] system --show [--ntp] system --show [--version] system --show [--timezones [Region]] system --show [--upgradefile] system --show [--upgradehistory] system --show [--marker] system --show [--replication_traffic] system --show [--opdup_traffic] system --show [--backup_traffic] system --show [--mgmt_traffic] system --init system --init --secure_erase <1–pass/3-passes/7-passes> system --reboot system --shutdown system --upgrade system --license [--validate] [--add] system --setname --name <node_name> system --setdate [--date <date>] [--timezone <Region/Zone>] system --setntp [--add <server name>] system --setntp [--delete <server name>] system --setntp [--enable] system --setntp [--disable] system --setntp [--adjust_time] system --hybrid_replication [--enable][--disable][--status] system --rdairgap [--enable][--disable][--set_retention_period <0 days to 365 days>][--get_retention_period][--open][--close][--status] system --rdairgap_schedule [--start_time <HH:MM>][--end_time <HH:MM>][--remove] system --setlogin system --telnet [--enable | --disable] system --datacheck --enable system --datacheck --disable system --datacheck --throttle system --marker [--enable] [--disable] system --verify_on_read [--enable] [--disable] system --add_storage --enclosure <service tag> system --storage [--set_usage_alert <70% - 90%>] system --storage [--blink] [--type <internal | external>] [--service_tag <service tag>] [--disk <slot num>] system --storage [--unblink] [--type <internal | external>] [--service_tag <service tag>] [--disk <slot num> system --mgmt_traffic system --backup_traffic system --replication_traffic system --opdup_traffic system --help

User

Virtual Machine

Virtual Machine Command Usage virtual_machine -- show [--service_tag <service tag>] virtual_machine --show --summary virtual_machine --update [--host <ip address | hostname>] [--name <administrator name>] [--email <email address>] [--company <company name>] [--comments <comments>] virtual_machine --register [--host <ip address| hostname>] [--name <administrator name>] [--email <email address>] [--company <company name>] [--comments <comments>] virtual_machine --unregister [--force] virtual_machine –delete --service_tag <service tag>

Maintaining the DR Series System

Diagnostics

Maintenance

Managing DR Series System Storage Operations

System Storage Operation Commands Connection

Container

VTL

VTL Command Usage vtl --show [--name <name>] vtl --show --verbose [--name <name>] vtl --update_carts --name <name> --add --no_of_tapes <number> vtl --activate --name <name> [--force <yes|no>] vtl --deactivate --name <name> vtl --rescan --name <name> [--force <yes|no>] vtl --set_rw --name <name> [--id <number>] vtl --show_replstate --name <name> vtl --help

NDMP

NDMP Command Usage ndmp --show ndmp --update [--port <port number>] ndmp --help

iSCSI

ISCSI Command Usage iscsi --show [--user] iscsi --setpassword iscsi --sessions iscsi --help

FC Command Usage fc --show [--verbose] [--target] fc --sessions [--topology] [--condensed] fc --help <command>

Replication

Replication Command Usage replication --show [--name <name>] [--role <source | target>] [--verbose] [--limits] replication --show replication --show [--limits] replication --add --name <name> --role <source | target> --peer <ip address | hostname> [--peer_name <name>] [--peer_group_name <name>] [--replication_traffic <ip address | hostname>] [--encryption <none | aes128 | aes256>][--username <user name>] replication --update --name <name> --role <source | target> [--peer <ip address | hostname>] [--encryption <none | aes128 | aes256>] [--username <user name>] replication --delete --name <name> --role <source | target> [--force] replication --start --name <name> --role <source | target> replication --stop --name <name> --role <source | target> replication --limit --speed <<num><KBps | MBps | GBps> | default> --target <ip address | hostname> replication --resync --name <name> --role <source | target> replication --troubleshoot --peer <ip address | hostname> replication --help

Seed

Seed Command Usage seed --create --op <import | export> [--enc_type <aes128 | aes256>] [--storage_group_name <name>] seed --add_container --name <container name> seed --add_device --server <server name> --volume <volume> --username <username> --domain <domain name> seed --cleanup seed --remove_device seed --show seed --start seed --help

Schedule

Schedule Command Usage schedule --show [--cleaner] schedule --show [--replication] [--name <name>] schedule --add --day <day of the week> [--cleaner] [--replication] [--start_time <hh:mm>] [-- stop_time <hh:mm>] [--name <name>] schedule --delete --day <day of the week> [--cleaner] [--name <name>] [--replication] schedule --help

Data Integrity Checking

About Data Check

Priority Write Verify Scans Continuous Data Verification Scans Data Check CLI Commands Data Check Options

Data Check: Namespace Scan Option Data Check: Blockmap Scan Option Data Check: All Data Scan Option

System --Datacheck

System --Datacheck Command Usage system --datacheck system --datacheck --disable system --datacheck --enable system --datacheck --throttle system --help datacheck

stats --datacheck

stats --datacheck Command Usage stats --datacheck

Additional Linux Commands

grep more

About us

storage_group --help

Description

Displays the list of all storage_group-related options that can be used as a reference when using the DR Series system CLI.

Syntax

Result

Usage:
storage_group --show [--name <name>]
[--verbose]

storage_group --add --name <name>
[--compression_mode <fast|best>]

storage_group --update --name <name>
[--compression_mode <fast|best>]

storage_group --encryption --name <name>
[--set <ON|OFF>]
[--mode <static | internal>]
[--interval <7 days to 70 years>]

storage_group --delete --name <name>

storage_group --setpassphrase --name <name>

storage_group --help

storage_group <command> <command-arguments>
command can be one of:
--show Displays the current list of storage_group.
--add Adds a new storage_group.
--update updates a storage_group.
--encryption updates encryption settings of a storage_group.
--delete Deletes an existing storage_group.
--setpassphrase sets passphrase to a storage_group.

For command-specific help, please type storage_group --help <command>
eg:
storage_group --help show

System

System Command Usage

system --show [--config]

system --show [--hardware]

system --show [--storage] [--type <boot | internal | external>] [--service_tag <service tag>]

system --show [--storage]

system --show [--license] [--verbose]

system --show [--ntp]

system --show [--version]

system --show [--timezones [Region]]

system --show [--upgradefile]

system --show [--upgradehistory]

system --show [--marker]

system --show [--replication_traffic]

system --show [--opdup_traffic]

system --show [--backup_traffic]

system --show [--mgmt_traffic]

system --init

system --init --secure_erase <1–pass/3-passes/7-passes>

system --reboot

system --shutdown

system --upgrade

system --license [--validate] [--add]

system --setname --name <node_name>

system --setdate [--date <date>] [--timezone <Region/Zone>]

system --setntp [--add <server name>]

system --setntp [--delete <server name>]

system --setntp [--enable]

system --setntp [--disable]

system --setntp [--adjust_time]

system --hybrid_replication [--enable][--disable][--status]

system --rdairgap [--enable][--disable][--set_retention_period <0 days to 365 days>][--get_retention_period][--open][--close][--status]

system --rdairgap_schedule [--start_time <HH:MM>][--end_time <HH:MM>][--remove]

system --setlogin

system --telnet [--enable | --disable]

system --datacheck --enable

system --datacheck --disable

system --datacheck --throttle

system --marker [--enable] [--disable]

system --verify_on_read [--enable] [--disable]

system --add_storage --enclosure <service tag>

system --storage [--set_usage_alert <70% - 90%>]

system --storage [--blink] [--type <internal | external>] [--service_tag <service tag>] [--disk <slot num>]

system --storage [--unblink] [--type <internal | external>] [--service_tag <service tag>] [--disk <slot num>

system --mgmt_traffic

system --backup_traffic

system --replication_traffic

system --opdup_traffic

system --help

This DR Series system CLI command and its options allow you to perform the a variety of system-related tasks, including the following:

•

Displaying the current system configuration

•

Initializing, rebooting, or shutting down the DR Series system

•

Upgrading the DR Series system software

•

Setting the system date and time

•

Setting the network time protocol (NTP)

•

Updating the login password

•

Enabling or disabling telnet access

•

Enabling or disabling marker detection status

NOTE: For information on the system --datacheck commands that are associated with the Data Check feature, see system --datacheck.

System Command Usage

This topic introduces the system command usage:

•

system --show [options]

•

system --init [options]

•

system --reboot

•

system --shutdown

•

system --upgrade

•

system --license [options]

•

system --setname --name

•

system --setdate [options]

•

system --setntp [options]

•

system --hybrid_replication [options]

•

system --rdairgap [options]

•

system --rdairgap_schedule [options]

•

system --setlogin

•

system --telnet [options]

•

system --datacheck [options]

•

system --marker [options]

•

system --verify_on_read [options]

•

system --add_storage --enclosure (Option only available on a physical hardware DR Series system)

•

system --storage [options]

•

system --mgmt_traffic (Option only available on a physical hardware DR Series system)

•

system --backup_traffic (Option only available on a physical hardware DR Series system)

•

system --replication_traffic (Option only available on a physical hardware DR Series system)

•

system --opdup_traffic (Option only available on a physical hardware DR Series system)

•

system --help

NOTE: If you specify a command without supplying the expected value or option, you will be prompted to provide the correct value or option.

system --show [--config]

Description

Displays the current system configuration summary for a DR Series system.

For specific sources of additional system configuration information, see the following system --show command options:

•

--hardware

•

--storage [--type <boot |internal |external>] [--service_tag <service tag>]

•

[--license] [--verbose]

•

•

•

•

•

•

•

[--replication_traffic]

•

[--opdup_traffic]

•

[--backup_traffic]

•

[--mgmt_traffic]

•

--encryption [options]

Syntax

system --show --config

Result

System Name : swsys-53
Current Time : Tue Apr 7 04:37:37 2015 PDT
Service Tag : 8MWT8Q1
Product Name : Dell DR4000
BIOS Version : 1.11.0
Version : 3.2.0192.0
Build : 56073
Build Date : Mon Apr 6 20:33:45 PDT 2015
IP Addr : 10.250.240.91
Mac Addr : 00:1B:21:9E:73:B8
Telnet State : Disabled
Compression Level : Balanced
Time Zone : US/Pacific
Data Check : Enabled - namespace,blockmap,throttle:50%
Marker Detection : Enabled
Storage Usage Alert : 90%
Encryption : Enabled - Mode: internal, Interval: 10
NTPD Service is : UP
System State : Operational Mode
Reason : Filesystem is fully operational for I/O.
Diagnostics Collector : RUNNING Apr 6 23:42:26
Configuration Server : RUNNING Apr 7 00:27:16
System State : Operational Mode
Reason : Filesystem is fully operational for I/O.
Diagnostics Collector : RUNNING Nov 13 23:02:11
Configuration Server : RUNNING Nov 15 02:24:51
Filesystem Server : RUNNING Nov 15 02:24:53
NDMP Daemon : RUNNING Nov 15 02:28:04
Windows Access Server : RUNNING Nov 17 03:46:30
HTTP Server : RUNNING Nov 13 22:59:44
Hardware Health Monitor : RUNNING Nov 13 23:02:58
Windows Active Directory Client : RUNNING Nov 13 23:07:07
Filesystem Checker : STOPPED
VTL Daemon : RUNNING Nov 15 02:28:06
ISCSI Server : RUNNING Nov 15 02:29:35
FC Server : RUNNING Nov 15 02:29:38
Global View Process : RUNNING Nov 13 22:59:44
Support Portal Agent Process : STOPPED

Verwandte Dokumente

The document was helpful.

Bewertung auswählen

I easily found the information I needed.

Bewertung auswählen

Bitte w&auml;hlen Sie Ihr Produkt aus:

Damit wir Ihnen besser helfen können, geben Sie den Grund Ihres Chats an:

Empfohlene Lösungen für Ihr Problem

DR Series Software 4.0.3.1 - Command Line Reference Guide

storage_group --help

Description

Syntax

Result

System

System Command Usage

system --show [--config]

Description

Syntax

Result

Bitte wählen Sie Ihr Produkt aus: