Chat now with support
Chat mit Support

DR Series Software 4.0 - Command Line Reference Guide

Introduction to the DR Series System Command Line Reference Guide Introducing the DR Series system Managing the DR Series system
Alerts Commands Authenticate Commands Network
Network Command Usage network --show network --delete network --restart network --setdhcp network --setstatic_ip [--bondif <bondN>] [--nwif <ethN>] --ip <IPv4/IPv6 address not already in use> --netmask <netmask> [--gateway <IPv4/IPv6 address>] network --create_bond network --create_eth network --add_member network --setdns [--suffix <dns suffix>] [--primary <IPv4/IPv6 address>] [--secondary <IPv4/IPv6 address>] network --setbonding --bondif <bondN> [--mode <ALB | 802.3ad>] [--mtu <supported MTU range 512 - 9000>] network --update network --factory_reset network --host network --route network --nslookup --destination <ip address | hostname> network --traceroute --destination <ip address | hostname> network --ping --destination <ip address | hostname> [--tries <number>] [--size <number>] [--interface <bondN | ethN>] network --blink network --enable network --disable network --troubleshoot [--links] [--gateway] [--ntp] [--dns] [--active_domain] [--nis] [--clients] [--port_mapper] [--network_config] [--show_active <NFS|CIFS|OST|RDS|NDMP|ISCSI|FC>] [--interface <bondN | ethN>] network --troubleshoot --gateway --interface <bondN | ethN> network --troubleshoot [--show_active <NFS| CIFS|OST|NDMP|ISCSI|RDS>] network --tcpdump [--port <nfs | windows | replication | ost | rds>] [--pkt_size <128 - 32768>] [--file_size <0 - 100>] [--stop] [--host <ip address list>] [--interface <bondN | ethN>] network --tcpdump [--pkt_size <128 - 32768>] network --tcpdump [--file_size <0 - 100>] network --tcpdump [--host <ip address list>] network --tcpdump [--port <nfs | windows | replication | ost | rds>] network --iperf_client --server <ip address | hostname> [--port <number>] [--window_size <num bytes [KB/MB]>] [--interval <num seconds>] [--time <num seconds>] network --iperf_server [--port <number>] [--window_size <num bytes [KB/MB>] network --help
OST RDA Stats Storage Group commands System
System Command Usage system --show [--config] system --show [--hardware] system --show [--storage] [--type <boot | internal | external>] [--service_tag <service tag>] system --show [--storage] system --show [--license] [--verbose] system --show [--ntp] system --show [--version] system --show [--timezones [Region]] system --show [--upgradefile] system --show [--upgradehistory] system --show [--marker] system --show [--replication_traffic] system --show [--opdup_traffic] system --show [--backup_traffic] system --show [--mgmt_traffic] system --init system --init --secure_erase <1–pass/3-passes/7-passes> system --reboot system --shutdown system --upgrade system --license [--validate] [--add] system --setname --name <node_name> system --setdate [--date <date>] [--timezone <Region/Zone>] system --setntp [--add <server name>] system --setntp [--delete <server name>] system --setntp [--enable] system --setntp [--disable] system --setntp [--adjust_time] system --setlogin system --telnet [--enable | --disable] system --datacheck --enable system --datacheck --disable system --datacheck --throttle system --marker [--enable] [--disable] system --verify_on_read [--enable] [--disable] system --add_storage --enclosure <service tag> system --storage [--set_usage_alert <70% - 90%>] system --storage [--blink] [--type <internal | external>] [--service_tag <service tag>] [--disk <slot num>] system --storage [--unblink] [--type <internal | external>] [--service_tag <service tag>] [--disk <slot num> system --mgmt_traffic system --backup_traffic system --replication_traffic system --opdup_traffic system --support_agent --register system --support_agent --unregister system --support_agent --stats system --support_agent --status system --help
User Virtual Machine
Maintaining the DR Series System
Diagnostics Maintenance
Maintenance Command Usage maintenance --filesystem [--start_scan [verify_data | verify_rda_metadata | verify_metadata] [--storage_group <name>] maintenance --filesystem [--stop_scan] maintenance --filesystem [--scan_status] maintenance --filesystem [--scan_report [verbose]] maintenance --filesystem [--repair_status [verbose]] maintenance --filesystem [--repair_history [verbose]] maintenance --filesystem [--scan_restart [verify_data | verify_rda_metadata | verify_metadata]] maintenance --filesystem [--repair_now] maintenance --filesystem [--reclaim_space] maintenance --filesystem [--stop_reclaim_space] maintenance --filesystem [--clear_quarantine] maintenance --filesystem --show_throughput maintenance --configuration [--backup] maintenance --configuration [--restore] maintenance --configuration [--reinit_dictionary] maintenance --configuration [--reset_web_certificate] maintenance --hardware [--reinit_nvram] maintenance --hardware [--restore_hw_db] maintenance --hardware [--motherboard_replaced] maintenance --disk [--make_standby [slot num]] [--type <internal | external-<num> | service tag>] --clear_foreign] maintenance --remote_access [--show] maintenance --remote_access [--enable] maintenance --remote_access [--racreset] maintenance --remote_access [--static_ip] [--ip <IPv4/IPv6 address>] [--netmask <netmask>] [--gateway <IPv4/IPv6 address>] [--device <lom1|lom2|lom3|lom4>] maintenance --remote access [--disable] maintenance --vdisk --check_consistency --type <boot|internal|external> [--service_tag <service tag>] maintenance --help
Managing DR Series System Storage Operations
System Storage Operation Commands Connection Container VTL NDMP iSCSI FC Replication Seed Schedule
Data Integrity Checking Additional Linux Commands

authenticate --help

Syntax

 authenticate --help

Result

Usage:
authenticate --show [--users]
            [--domain <domain name>]
            [--login_group]

authenticate --join --domain <domain name>
            [--ou <org-unit name>]
             --user <user name>

authenticate --leave [--user <user name>]
            [--force]

authenticate --update --kerberos

authenticate --add [--user <user name>]
            [--login_group <DOMAIN\LOGIN GROUP>]

authenticate --delete [--user <user name>]
            [--login_group <DOMAIN\LOGIN GROUP>]

authenticate --set --user <user name>

authenticate --guestmode [--enable]
            [--disable]

authenticate --server_signing --mode <auto|mandatory|disabled|show>

authenticate --help

authenticate <command> <command-arguments>
<command> can be one of:
--show           Displays current ADS domain, authorized local CIFS users, and login group.
--join           Joins an ADS domain.
--leave          Leaves an ADS domain.
--update         Updates ADS configuration.
--add            Creates local workgroup user for CIFS authentication or adds login group.
--delete         Deletes local workgroup user from CIFS authentication or deletes login group.
--set            Sets password for a local workgroup user.
--guestmode      Configures all CIFS shares for guest only access.
--server_signing Configures server signing for CIFS.

For command-specific help, please type authenticate --help <command>
For example:
            authenticate --help show

Network

Network Command Usage

Note: Most network commands require a network --restart command for the changes to occur.

network --show

Syntax

network --show [--bondif <bond0,bond1,...,bondN>] [--nwif <eth0,eth1,...,ethN>] [--hosts] [--routes] [--interface <bondN|ethN>]

			--bondif		Bond interface(s) to show.
			--nwif			Eth interface(s) to show.
			--hosts			Show local host.
			--routes		Show local routes.
			--interface	Routes for a specific interface.        

Result

Device							: bond0
Enabled							: yes
Link								: yes
Boot protocol		     : dhcp
IP Addr							: 10.20.24.55
Netmask							: 255.255.252.0
Gateway							: 10.20.32.13
MAC Addr						: 78:2B:CB:47:D0:08
MTU								: 1500
Bonding options			: "mode=balance-alb miimon=100 xmit_hash_policy=2"
Slave Interfaces			: eth0,eth1,eth2,eth3
eth0 MAC						: 78:2B:CB:47:D0:08
eth0 Max Speed				: 1000baseT/Full
eth0 Speed					: 1000Mb/s
eth0 Duplex					: Full
eth1 MAC						: 00:50:56:93:5A:02
eth1 Max Speed				: 1000baseT/Full
eth1 Speed					: 1000Mb/s
eth1 Duplex					: Full
eth2 MAC						: 00:50:56:93:5A:03
eth2 Max Speed				: 1000baseT/Full
eth2 Speed					: 1000Mb/s
eth2 Duplex					: Full
eth3 MAC						: 00:50:56:93:5A:04
eth3 Max Speed				: 1000baseT/Full
eth3 Speed					: 1000Mb/s
eth3 Duplex					: Full
DNS Suffix					: storage.local
Primary Nameserver		: 10.25.19.15
Secondary Nameserver	: 10.25.19.16
Verwandte Dokumente

The document was helpful.

Bewertung auswählen

I easily found the information I needed.

Bewertung auswählen