external help file: QuestSoftware.RecoveryManager.AD.PowerShellFE.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShellFE
online version:
Sets global settings for recovery projects.
Set-RMADFEGlobalOptions [[-ToAddress] <String>] [[-SendVerifyNotification] <Boolean>]
[[-SendRecoveryNotification] <Boolean>] [[-CustomDriversPath] <String>]
[[-AgentOperationAbortTimeout] <UInt32>] [[-FRPasswordComplexity] <String>] [[-FRPasswordLength] <Int32>]
[-CheckBackupIntegrity <Boolean>] [-EnableSecureBootForVMs <Boolean>] [-Save] [<CommonParameters>]
Sets global settings that will be applied to all recovery projects by default.
PS C:\> Set-RMADFEGlobalOptions -ToAddress "to@domain.com" -SendVerifyNotification $true -SendRecoveryNotification $true
This command applies the specified settings to the configuration.
PS C:\> Set-RMADFEGlobalOptions -ToAddress "to@domain.com" -Save
This command applies the specified settings to the configuration and saves the updated settings to the file.
PS C:\> Set-RMADFEGlobalOptions -Save -FRPasswordComplexity "IncludeDigits,IncludeLowerCase" -FRPasswordLength "8"
This command applies the specified settings to the Password requirements options to the Backup and Restore of the configuration file for Forest Recovery projects.
Specifies the path of a custom driver that you want to add to the Quest Recovery Environment image.
Type: UInt32
Parameter Sets: (All)
Aliases:
Required: False
Position: 12
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Enables automatic integrity check after a backup is created.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the path to the Quest Recovery Environment image.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: 11
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies if Hyper-V and VMWare virtual machines will be created with secure boot enabled.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Password complexity is set via flags with the following parameters. To use multiple flags, they must be delimited by a "," (comma).
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: 13
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Changes the minimum required password. The password length cannot be 0 and will default to 1.
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: 14
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Saves the global settings to the file.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
Indicates whether the email notification option is enabled for the restore process.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: 7
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Indicates whether the email notification option is enabled for the verification process.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: 6
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the recipient of email notifications.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: 5
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
external help file: QuestSoftware.RecoveryManager.AD.PowerShellFE.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShellFE
online version:
Sets persistence connection settings.
Set-RMADFEPersistenceConnection [-DataSource] <String> [-Credentials] <PSCredential> [<CommonParameters>]
Set-RMADFEPersistenceConnection [-Disable] [<CommonParameters>]
Set-RMADFEPersistenceConnection [-Enable] [<CommonParameters>]
Set-RMADFEPersistenceConnection [-DataSource] <String> [-IntegratedSecurity] [<CommonParameters>]
Sets persistence connection settings that are used to store the Forest Recovery process state.
PS C:\> $creds = new-object PSCredential("sa", (ConvertTo-SecureString 'Password' -asPlainText -Force))
Set-RMADFEPersistenceConnection -DataSource "ws\SQLExpress" -Credentials $creds
Get-RMADFEPersistenceConnection
This command sets persistence connection settings.
PS C:\> Set-RMADFEPersistenceConnection -Disable
Get-RMADFEPersistenceConnection
This command disable persistence connection settings.
Specifies MS SQL security credentials
Type: PSCredential
Parameter Sets: MSSQLSecurity
Aliases:
Required: True
Position: 3
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies MS SQL instance
Type: String
Parameter Sets: MSSQLSecurity, IntegratedSecurity
Aliases:
Required: True
Position: 1
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Disables persistence connection
Type: SwitchParameter
Parameter Sets: DisableConnection
Aliases:
Required: True
Position: 0
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
Enables persistence connection
Type: SwitchParameter
Parameter Sets: EnableConnection
Aliases:
Required: True
Position: 0
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
Enable Windows Authentication using
Type: SwitchParameter
Parameter Sets: IntegratedSecurity
Aliases:
Required: True
Position: 2
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
external help file: QuestSoftware.RecoveryManager.AD.PowerShellFE.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShellFE
online version:
Sets recovery mode for the current recovery project
Set-RMADFERecoveryMode [-RecoveryMode] <RecoveryMode> [[-ExcludingDomains] <String[]>] [<CommonParameters>]
This cmdlet changes the recovery mode of the recovery project.
PS C:\> Set-RMADFERecoveryMode -RecoveryMode SYSVOLRecovery
Sets up SYSVOL recovery mode on the recovery project
PS C:\> Set-RMADFERecoveryMode -RecoveryMode DomainRecovery -ExcludingDomains @("domain1", "domain2")
Sets up Domain recovery mode on the recovery project and exclude "domain1" and "domain2" from recovering.
Specifies domains that must not be recovered when DomainRecovery mode selected.
Type: String[]
Parameter Sets: (All)
Aliases:
Required: False
Position: 1
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies recovery mode which can accept one of the following values:
Type: RecoveryMode
Parameter Sets: (All)
Aliases:
Accepted values: ForestRecovery, DomainRecovery, SYSVOLRecovery, Repromotion
Required: True
Position: 0
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
external help file: QuestSoftware.RecoveryManager.AD.PowerShellFE.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShellFE
online version:
Applies settings to the verification schedule for the RMADFE project.
Set-RMADFESchedule [[-Schedules] <Schedule[]>] [-Credential] <PSCredential> [[-NewCredential] <PSCredential>]
[[-IsEnabled] <Boolean>] [<CommonParameters>]
This cmdlet applies settings to the verification schedule for the current RMADFE project.
PS C:\> $schedule = New-RMADFESchedule -Once -StartDate "2/20/2022 1:00"
$credential = Get-Credential
Set-RMADFESchedule -Schedules $schedule -Credential $credential -IsEnabled $true
Set a one-time schedule for the current project. Schedule is enabled and will run under the specified user account.
Specifies credentials that will be used to run the command.
Type: PSCredential
Parameter Sets: (All)
Aliases:
Required: True
Position: 1
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies whether the schedule is enabled.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: 3
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Credential to change an account to. If a new credential is specified, the Credential parameter should contain the previous account credential for a task.
Type: PSCredential
Parameter Sets: (All)
Aliases:
Required: False
Position: 2
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies schedules for project verification.
Type: Schedule[]
Parameter Sets: (All)
Aliases:
Required: False
Position: 0
Default value: None
Accept pipeline input: True (ByValue)
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
© ALL RIGHTS RESERVED. Nutzungsbedingungen Datenschutz Cookie Preference Center