NetVault Plug-in for VMware 13.2

On the Create Restore Job — Choose Saveset page, the saveset table provides a list of available savesets. The table shows the saveset name (Job Title and Saveset ID), creation date and time, saveset size, and saveset status.

The saveset status is indicated using the following icons.


Icon	Description
	Saveset is online (all segments are online).
	Saveset is partially online (some segments are online).
	Saveset is offline (all segments are offline).

The saveset list is sorted by creation date. You can sort the list by a different column or reverse the sort order by clicking the column heading. The arrowhead next to the column name indicates the sort order.

To filter the saveset list, use the following filter options:

Filter

Description

Client

Displays savesets created for particular clients. The default selection is Any.

To use this filter, click the Client box.

In the Choose Client dialog box, select the clients.

To close the dialog box, click OK.

Plugin Type

Displays savesets created using a particular plug-in. The default selection is Any.

To use this filter, click the Plugin Type box.

In the list, select the plug-in.

Date

Displays savesets created during a specified period. The default selection is Any.

To use this filter, click the Date box.

In the list, select the option that you want to use.

The available options are Last 24 hours, Last Week, Last Month, Last 6 Months, Last Year, and Any.

Job

Displays savesets created for particular jobs. The default selection is Any.

To use this filter, click the Job box.

In the Choose Job dialog box, select the jobs.

To close the dialog box, click OK.

Select the saveset that you want to use, and click Next.

When you select a saveset, the following details are displayed in the Saveset Information area: Job ID, job title, tag, server name, client name, plug-in name, saveset date and time, retirement setting, Incremental Backup or not, archive or not, and saveset size.

Backup tags indicate the type of image-level backup. The image-level backups use the following tags or backup-type identifiers:

•

BACKUP IMAGE FULL

•

BACKUP IMAGE INCREMENTAL

•

BACKUP IMAGE DIFFERENTIAL

On the Create Selection Set page, select the images that you want to restore.

You can also open the images, and select the individual virtual drives that you want to restore.


	NOTE: If you select an Incremental or a Differential Backup, the plug-in automatically restores all savesets in the backup sequence up to the selected saveset. The plug-in does not perform any unnecessary steps to read, send, or write disk sectors that have changed in a later backup. Each sector is restored only once.

Click

Depending on your VMware environment, configure the applicable options in the Plug‑in for VMware Restore Options dialog box.

•

Cluster setup: In a cluster setup managed by a VMware vCenter Server, configure the following options on the Restore virtual machine to vCenter tab.

Option

Description

Recover virtual machine to vCenter

To restore a virtual machine or one or more virtual drives to the same vCenter Server or a different one, select this option.

Alternate Resource Pool Path

A resource pool represents the processor and memory resources that are available to an ESXi Server Host or a cluster of hosts. These resources are made available to the individual virtual machines controlled by the host. Resource pools can be configured in terms of absolute minimum and maximum quantities or relative shares. To run a virtual machine, it must be allocated a resource pool.

By default, a virtual machine is allocated to its original resource pool during restore. To allocate a virtual machine to an alternate resource pool, specify the target resource pool in this box. Use the following format to specify the resource pool:

/Pool-A/Pool-B/.../Pool<n>

Here, Pool<n> is the target resource pool, Pool-A is the child of the root resource pool, Pool-B is the child of Pool-A, and so on. This format allows you to specify a resource pool at any arbitrary depth within the hierarchy. To allocate the virtual machine to the root resource pool, type the “/” character.

Note the following:

•

If you do not specify any resource pool, the virtual machine is allocated to its original resource pool (as at the time of backup).

•

If you specify an invalid or inaccessible resource pool, the plug-in follows the path hierarchy backwards to find a valid resource pool. It allocates the virtual machine to the first valid ancestor pool in the path and logs an error message.

Alternate Datastore

A datastore represents a storage location for virtual machine files. It can be a VMFS volume, directory on Network Attached Storage, or local file system path. A datastore is platform- and host-independent.

To change the datastore for a virtual machine, specify the destination datastore name for the virtual machine. You can use this option when the original datastore is unavailable, inaccessible, or cannot hold the virtual machine due to lack of space. Verify that the name is correct and the datastore is accessible to the ESXi Server Host. When you configure an alternate datastore, all virtual drive and configuration files associated with a virtual machine are restored to a single datastore. Verify that the target datastore has sufficient disk space to hold the virtual machine files.

Restore fails if the datastore is invalid or inaccessible or does not have sufficient space to store virtual machine files.

Alternate ESXi Host Address

By default, the plug-in enters the address for the current ESXi host in this field. If you want to restore the virtual machine to a different ESXi host, update the address for the ESXi host in this field. The host can be for the same vCenter Server or a different one.

•

Standalone ESXi Server setup: In a standalone ESXi Server setup, click the Restore virtual machine to standalone ESXi host tab, and configure the following options.


Option	Description
Recover virtual machine to standalone ESXi host	To restore a virtual machine or one or more virtual drives to a standalone ESXi Server, select this option.
Alternate Datastore	To change the datastore for a virtual machine, specify the destination datastore name for the virtual machine. For more information about this option, see Alternate Datastore.

•

Delete existing virtual machine: If you are restoring a virtual machine to its original location, you have two options: delete the existing virtual machine and let the restore process re-create it, or let the restore process overwrite existing “.vmdk” file. If you want to delete the existing virtual machine and let the restore process re-create it, click the General Options tab, and select the Delete Existing VM option.


	IMPORTANT: This option is not supported on virtual machines that are protected using vSphere FT.

•

Power On VM: To enable power to the virtual machine after a restore is successfully completed, click the General Options tab, and select the Power On VM option. If you are restoring the virtual machine to its original name and location, the plug-in does not support changing the datastore. If you are renaming the virtual machine as described in Renaming a virtual machine during restore, you can specify the same vCenter Server, an alternate vCenter Server, or a standalone ESXi Server.

•

Disable distribution of restore job to other VMware Backup proxy: If you configured your environment to use the Distributed Jobs feature, select this check box on the General Options tab to turn off the feature for a specific job. This option is disabled by default.

•

Enable Job Level Transport Mode: If you are using the Distributed Jobs feature and you want to set the transport mode manually at the job level, select this option, and then select the applicable Primary Transport Mode and Fallback Transport Mode.

Optionally, to instantly restore the VM using a QoreStor storage device, select Use Instant Restore.

For more information, see Recovering a virtual machine using Instant Restore.

To save the settings, click OK, and then click Next.

In Job Name, specify a name for the job.

Assign a descriptive name that lets you easily identify the job for monitoring its progress. A job name can contain alphanumeric and nonalphanumeric characters, but it cannot contain non-Latin characters. There is no length restriction. However, a maximum of 40 characters is recommended on all platforms

In the Target Client list, verify that the client from which data was backed up is selected.

This client is selected by default. Do not change this setting.

Select or create the Schedule Set, Restore Source Set, and Advanced Options Set.

For more information about these sets, see the Quest NetVault Administrator’s Guide.

To submit the job for scheduling, click Submit.

You can monitor the job progress from the Job Status page and view the logs from the View Logs page. For more information about these functions, see the Quest NetVault Administrator’s Guide.

Important notes

•

If you select one or more virtual drives instead of the virtual machine, the plug-in overwrites the contents of the existing “.vmdk” file.

When restoring individual virtual drives, the target virtual machine and the selected virtual drives must exist in the inventory. If the virtual machine is removed from the inventory, the job reports an error (“Could not locate the VM”) and fails. The plug-in also reports an error if the target “.vmdk” file does not exist in the inventory.

•

While restoring one or more virtual drives to an existing virtual machine, the plug-in tries to locate the virtual machine using its UUID. If the plug-in finds more than one virtual machine sharing the UUID, the following error message is logged and the job fails:

Failed to uniquely locate VM in server inventory because its uuid 'xxxx'
is in use by one or more other VMs.

When this error occurs, you must change the UUID for the virtual machines in the inventory so that each virtual machine has a unique UUID. You can use the following procedure to locate virtual machines that use the same UUID.

To find virtual machines that share a UUID

Open a browser window, and in the address bar, type the following URL.

https://<server_address>/mob/?moid=SearchIndex&method=findAllByUuid

Provide the login information for the server.

(<server_address> must be the address of the target vCenter or ESXi Server on which you want to restore the virtual drives.)

In the uuid box, type the UUID for the virtual machine that you want to restore.

In the vmSearch box, type true.

Leave the remaining options blank, and start the search.

The virtual machines that share the given UUID are displayed in the val list.

Click the link for managed object reference of each virtual machine to view the name and other details.

Change the UUID so that each virtual machine has a unique UUID.

For more information about this procedure, see the relevant VMware documentation.

Restore selection tree icons

Use the following table as a reference to determine the meaning of each icon the plug-in shows in the restore selection tree.

Table 9. Restore selection tree icons
Icon	Description
	Virtual machine
	Failed virtual machine (is displayed in a saveset for stopped job)
	Configuration file
	NVRAM file
	Virtual machine disk file
	Disk extent information file
	Log file
	Catalog file