Chat now with support
Chat mit Support

Foglight 6.3.0 - Installing Foglight on Windows with an External Microsoft SQL Server Database

Before Installing Foglight Installing Foglight
Preparing to install Installing a new version of the Management Server Installed directories Foglight settings HP patch checking tool Uninstalling Foglight Upgrading the Management Server Installing Foglight FAQ
Running the Management Server Installing and Upgrading Cartridges Installing Agents

Option 1 - Run the Foglight database tool to configure the database

Option 1 - Run the Foglight database tool to configure the database

Run Foglight’s database tool from the command line after exiting the installer. The database tool is located in the <foglight_home>\client\ directory.

 
 
* 
NOTE: Option 1 does not currently support the creation of a SQL Server® database with Windows® integration.
To perform manual database configuration:
•
Create the database. Run the following command, including the -D parameters and values as required:
java [-D...] -jar foglight-database-tool.jar createdb
For example:
java ‑Dserver.database.type=sqlsvr ‑Dserver.database.host=sqldbhost01 ‑Dserver.database.port=1433 ‑Dserver.database.name=foglight ‑Ddb.admin.user=sa ‑Ddb.admin.password=foglight ‑Ddb.schema.username=foglight ‑Ddb.schema.password=foglight ‑Ddb.schema.name=foglight ‑jar foglight-database-tool.jar createdb
 
* 
NOTE: The following SQL warnings may appear when creating the database on SQL Server®:
2012-07-03 14:52:21.231 INFO Create database "foglight"...
2012-07-03 14:52:21.809 WARN SQL Warning: Changed database context to 'master'.
2012-07-03 14:52:46.981 WARN SQL Warning: Changed database context to 'foglight'.
2012-07-03 14:52:47.044 INFO Create Schema for database "foglight"...
2012-07-03 14:52:47.512 WARN SQL Warning: Warning! The maximum key length is 900 bytes. The index 'idx_cfgbinder_agent' has maximum length of 1530 bytes. For some combination of large values, the insert/update operation will fail.
2012-07-03 14:52:47.715 WARN SQL Warning: Warning! The maximum key length is 900 bytes. The index 'incident_ticket_index' has maximum length of 1020 bytes. For some combination of large values, the insert/update operation will fail.
2012-07-03 14:52:47.715 WARN SQL Warning: Warning! The maximum key length is 900 bytes. The index 'idx_pcm_name_type' has maximum length of 1786 bytes. For some combination of large values, the insert/update operation will fail.
2012-07-03 14:52:47.934 INFO Populate for database "foglight"...
The database tool requires the following parameters:
•
-Dserver.database.type=<mysql|sqlsrv|oracle|postgresql>
•
-Dserver.database.host
•
-Dserver.database.port
•
-Dserver.database.name
•
-Ddb.admin.user
 
* 
NOTE: The -Ddb.admin.user must exist, and must have database administrator privileges.
•
-Ddb.admin.password
•
-Ddb.schema.username
 
* 
NOTE: The tool creates the -Ddb.schema.username user when you run the command.
•
-Ddb.schema.password
•
-Ddb.schema.name
 
* 
NOTE: To delete the database and start over, run the database tool with the dropdb option instead of the createdb option shown in the preceding example. The dropdb option does not remove an existing or new Repository User account.

Option 2 - Run SQL scripts to configure the database

If you clicked Create during the database installation step, the SQL scripts in the <foglight_home>\scripts\sql directory are prepared with the provided configuration options. SQL Server® generates four SQL scripts for each Authentication type:

•
SQL Server Authentication:
•
sqlsvr_drop_db.sql
•
sqlsvr_create_db.sql
•
sqlsvr_create_schema.sql
•
sqlsvr_populate_db.sql
•
Windows Authentication:
•
sqlsvr_integratedauth_drop_db.sql
•
sqlsvr_integratedauth_create_db.sql
•
sqlsvr_create_schema.sql
•
sqlsvr_populate_db.sql

You can review these scripts before running them.

You must run the configured scripts against the database using a third-party tool.

To perform manual database configuration with SQL Server Authentication:
1
Launch a command window.
2
Run the .sql scripts by issuing the following commands from the prompt in the order shown:
 
* 
NOTE: In the following commands, replace <admin_username> and <admin_password> with the user name and password for the user account of the Microsoft SQL Server administrator.
a
sqlcmd -U <admin_username> -P <admin_password> -i <foglight_home>\scripts\sql\sqlsvr_drop_db.sql
This script must be run under an account with administrator privileges (for example, sa), because you require system access to run it.
b
sqlcmd -U <admin_username> -P <admin_password> -i <foglight_home>\scripts\sql\sqlsvr_create_db.sql
This script must be run under an account with administrator privileges (for example, sa), because you require system access to run it.
 
* 
NOTE: The script sqlsvr_create_db.sql does not drop the existing schema.
c
sqlcmd -U <foglight_username> -P <foglight_password> -i <foglight_home>\scripts\sql\sqlsvr_create_schema.sql
This script must be run using the Foglight Database Account User ID that you set in Step 12: Foglight repository database type. The default Foglight Database Account User ID is foglight.
 
* 
NOTE: Warnings related to the maximum length of index keys appear. These warnings are safe to ignore.
d
sqlcmd -U <foglight_username> -P <foglight_password> -i <foglight_home>\scripts\sql\sqlsvr_populate_db.sql
This script must be run using the Foglight Database Account User ID that you set in Step 12: Foglight repository database type. The default Foglight Database Account User ID is foglight.
To perform manual database configuration with Windows authentication:
1
Launch a command window.
a
sqlcmd -U <admin_username> -P <admin_password> -i <foglight_home>\scripts\sql\sqlsvr_integratedauth_drop_db.sql
This script must be run under an account with administrator privileges (for example, sa), because you require system access to run it.
b
sqlcmd -U <admin_username> -P <admin_password> -i <foglight_home>\scripts\sql\sqlsvr_integratedauth_create_db.sql
This script must be run under an account with administrator privileges (for example, sa), because you require system access to run it.
 
* 
NOTE: The script sqlsvr_integratedauth_create_db.sql does not drop the existing schema.
2
Launch another command window with “Run as windows integration” domain user.
a
sqlcmd -i
<foglight_home>\scripts\sql\sqlsvr_create_schema.sql
b
sqlcmd -i
<foglight_home>\scripts\sql\sqlsvr_populate_db.sql

After you have run all four scripts, you can start the Management Server. Proceed to Starting and stopping the Management Server.

Initializing the database

Initializing the database

For external databases, once the database has been successfully initialized, you can run Foglight.

Starting and stopping the Management Server

The following sections describe how to start and stop the Management Server:

•
Starting the Management Server
•
Running the Management Server as a Windows service
•
Stopping the Management Server
•
Starting and stopping the Management Server in High Availability mode
Verwandte Dokumente

The document was helpful.

Bewertung auswählen

I easily found the information I needed.

Bewertung auswählen