Chat now with support
Chat mit Support

NetVault Bare Metal Recovery 13.1.1 - User Guide for Plug-ins

Introducing NetVault Bare Metal Recovery Plug-ins Deploying NetVault Bare Metal Recovery Using the Plug-in Offline Client
Plug-in Server: an overview Installing and removing Plug-in Server Configuring Plug-in Server for use with Plug-in Offline Client Booting a NetVault Bare Metal Recovery Client with Plug-in Offline Client Backing up data with Plug-in Offline Client Restoring data with Plug-in Offline Client
Using NetVault Bare Metal Recovery Plug-in Live Client
Plug-in Live Client overview Configuring Plug-in Server for use with Plug-in Live Client Installing and removing Plug-in Live Client Backing up data with Plug-in Live Client Booting a NetVault Bare Metal Recovery Client with Plug-in Offline Client Restoring data with Plug-in Live Client
NetVault Bare Metal Recovery physical-to-virtual (P2V) recovery  Troubleshooting

Creating a Windows PE-based Boot System

You can complete this process on any Windows system for which the following requirements are met:

•
Windows Assessment and Deployment Kit (ADK) for Windows 8 — obtained through download
•
Windows Server 2012 R2 or later
•
“NetVault Bare Metal Recovery ISO Builder for Plug-in Offline Client for Windows” file — on the Quest NetVault Installation CD or downloaded from the Quest website
•
A writable DVD and CD drive
•
A blank DVD and CD
•
DVD- and CD-generation software
 
* 
NOTE: Quest recommends that you shut down all applications running on this machine before starting this procedure
1
Download the Windows ADK for Windows 8 from: http://www.microsoft.com/en-us/download/details.aspx?id=30652
2
Install the Windows ADK on a Windows Server 2012 R2 or later system.
You can use the default directory, C:\Program Files (x86)\Windows Kits\8.0, or a different directory of your choosing.
 
* 
IMPORTANT: Installation of Windows ADK also installs Microsoft .NET Framework if it is not already installed. After .NET Framework is installed, the system is automatically restarted.
3
Extract the “NetVault Bare Metal Recovery ISO Builder for Plug-in Offline Client for Windows” file to the Windows ADK machine.
This step creates two files, “nvbmrisocreate.exe” and “nvbmriso.pkg.”
4
Verify that the path to where you intend to create the ISO image exists.
If the directory does not exist when you run the next step, the ISO image is not created.
5
To create the Windows PE ISO image, navigate to the directory that contains the extracted “nvbmrisocreate.exe” file, type the following at the command prompt, and press Enter:
The following list describes what you can specify for each option:
•
/TYPE: If you are working with an earlier version of the Plug-in Offline Client, enter WAIK for Windows Automated Installation Kit (AIK). If you are using version 6.1 or later, you can enter ADK.
•
/PKG: Enter the full path and filename for the Plug-in Offline Client .pkg file that you downloaded separately.
•
/DIR: Enter the full path to the location of the Windows AIK or ADK directory.
•
/OUT: Enter the path where the bootable ISO image should be created.
•
/ADDDRV: Enter the full path where the downloaded device drivers are stored.
•
/BIT:32: If you must create a backward-compatible version of VaultOS for use with a 32-bit version of Windows PE, enter this option.
Example:
nvbmrisocreate /TYPE:ADK
/PKG:"<pathToFile>\nvbmriso.pkg"
/DIR:"C:\Program Files (x86)\Windows Kits\8.0"
/OUT:"C:\temp\bmr.iso"
6
Insert a blank CD in the writable drive.
7
Create a CD with CD-generation software using the “bmr.iso” file generated in Step 5.

Creating a rescue device for use with a LiveCD

A LiveCD is an OS that boots from a CD without the necessity of installing to a hard drive. This tool lets you initiate DR without the OS on disk. Plug-in Server supports booting from a LiveCD with VaultOS on a separate device, such as a USB device (Rescue USB) that uses the 3.0 protocol or earlier, or a different CD (Rescue CD).

The following items are required to create a Rescue CD or Rescue USB device:

•
The “drdaemon” and “vaultdr_client.sh” files — obtained through download.
•
A USB port and a USB device with enough space to hold the “drdaemon” and “vaultdr_client.sh” files; 1 MB is sufficient,
— or —
•
A blank CD and a writable CD drive.
 
* 
NOTE: You need two CD drives on the target system to use a Rescue CD with a LiveCD.
1
Download Plug-in Offline Client, VaultOS from the Quest website.
2
Note the name and location of this file, for example, “/home/vaultos_x86_vxxx.zip,” where xxx represents the software version number.
3
Insert a blank CD in the writable drive.
4
Create a CD with the CD-generation software using the “vaultos_x86_vxxx.iso” file.
For details on this procedure, see the relevant documentation for the CD-generation software in use.

For instructions on booting from a LiveCD, see Booting the NetVault Bare Metal Recovery Client from a LiveCD.

Adding a NetVault Bare Metal Recovery Client to the Plug-in Server

Adding a NetVault Bare Metal Recovery Client to the Plug-in Server

To access a NetVault Bare Metal Recovery Client machine correctly for backup and restore, add it to the Plug-in Server. After you have added an initial NetVault Bare Metal Recovery Client to the NetVault Server, repeat these steps to add additional clients.

1
In the Navigation pane of the NetVault WebUI, click Create Backup Job.
2
Next to the Selections list, click .
3
On the NetVault Selections page, double-click the NetVault Server — with the Plug-in Server installed on it — to open it.
4
Click the Plug-in Server, labeled “VaultDR APM,” and select Add Client from the context menu.
5
When the Add Bare Metal Recovery Plug-in Offline Client dialog box is displayed, complete the following fields to add the client:
•
Client Name: The name of the applicable NetVault Bare Metal Recovery Client. NetVault scans the network, looking for available systems that can be added as NetVault Bare Metal Recovery Clients, and displays them in the drop-down list.
•
Address(es): A comma-separated list of addresses that can either be IP addresses or resolvable network names, for example, 10.55.55.1, Server_1, 10.55.55.2, that see the machine to add.
•
Port Number: The port used to invoke drdaemon, for example, 15555. The default is 10000.
6
Click Next.
After the client is successfully added to the server, a message is displayed.
7
Repeat these steps as required until all NetVault Bare Metal Recovery Clients have been added.

Editing an existing NetVault Bare Metal Recovery Client

With a NetVault Bare Metal Recovery Client added to the NetVault Server, the settings made during the original addition process can be edited, if necessary.

1
In the Navigation pane, click Create Backup Job.
2
Next to the Selections list, click .
3
On the NetVault Selections page, double-click the NetVault Server — with the Plug-in Server installed on it — to open it.
4
To expand the Plug-in Server icon, labeled “VaultDR APM,” double-click it.
5
Click the applicable NetVault Bare Metal Recovery Client, and select Edit Client from the context menu.
6
When the Edit Bare Metal Recovery Plug-in Offline Client dialog box is displayed, update the applicable values:
•
Client Name: This field contains the current name for the selected client. Changing this value updates the name of the NetVault Bare Metal Recovery Client in NetVault.
•
Address(es): This field contains the IP address originally set for this client. You can change this value or add additional, comma-separated addresses.
•
Port Number: This field contains the port used to invoke drdaemon, for example, 15555. The default is 10000.
7
To close the dialog box and commit the changes, click OK.
Verwandte Dokumente

The document was helpful.

Bewertung auswählen

I easily found the information I needed.

Bewertung auswählen