SharePlex 9.2.6 - Administration Guide

Use INDEX hints

Valid for: Oracle targets

When SharePlex performs UPDATEs and DELETEs on a target table, Oracle sometimes does not pick the most efficient index for SharePlex. Without the right index, the Post process slows down when multiple UPDATEs and DELETEs are performed. SharePlex enables you to make use of Oracle’s INDEX hints to enforce the use of the correct index on target objects.

To use INDEX hints, use the hints.SID file, where SID is the ORACLE_SID of the target instance. When Post applies a SQL statement, it reads the hints file. If the file contains entries, Post reads the data into memory and then checks each UPDATE and DELETE statement that it processes. If any of those operations involve tables listed in the hints file, Post sends the hints to Oracle.

Use hints only for tables that need them. For example, if Post is doing full-table scans on tables where there are defined indexes, use hints only for those tables. The use of hints causes Post to read the hints.SID file for each operation on tables listed in the file. This can slow down processing if numerous tables are listed.

The default maximum number of hints (table/index pairs) is 100. You can adjust this value with the SP_OPO_HINTS_LIMIT parameter. See the SharePlex Reference Guide for more information.

Make certain all indexes are valid. Although SharePlex will use an invalid index as a hint, Oracle ignores invalid hints and returns no errors. SharePlex writes the following information to the event_Log if it detects abnormal conditions relating to the specified hints.

15050 – hint file not found

17000 – error opening hint file

15051 – missing column in the hint file (either table or index name)

15052 – syntax error for tablename

15053 – syntax error for indexname

15054 – source table’s object_id not found in object cache

15055 – more than 20 valid entries were entered into the hints file

To use the hints file

There is a blank hints.SID file in the SharePlex variable-data directory on each system. Use the hints.SID file that resides on the target system. If a hints file does not exist, create one in this directory and make certain to use the hints.SID naming format.

1. Stop Post if it is running.
2. Open the file.
3. You can add comment lines anywhere in the file. Start a comment line with a pound symbol (#).

4. On a non-commented line, use the following template to specify a source table and the index that you want to use for that table. Put at least one space between the table name and the index name. Place each specification on a separate line.

   src_owner.table

   tgt_owner.index

   Example

   scott.emp

   scott.emp_index

Tune SQL Caching

SharePlex caches frequently-used SQL statements for reuse so that they do not have to be parsed and bound every time they recur. This is an adjustable feature of SharePlex that is named SQL Cache. You can tune this feature to maximize its advantages based on the amount of repetitive statements your application generates.

SQL Cache improves the performance of Post only if the same SQL statements are issued over and over again, with no variation except the data values. If that is not true of your environment, then SQL Cache adds unnecessary overhead to the Post process, and you should disable it.

Supported targets

All

Enable or disable SQL Cache

Control SQL Cache as follows:

Oracle

Open Target

Tune SQL Cache for best performance

Follow these steps to make certain that the number of active statements is optimal for the operations that are replicated.

1. Determine the hit ratio for cached statements by running sp_ctrl and issuing the show post detail command.
2. Look for the SQL cache hit count field. It shows the ratio of the total number of messages that are executed without parsing and binding divided by the total number of INSERT, UPDATE and DELETE operations. For example, a hit ratio of 36% indicates that Post is using cached statements 36 percent of the time.
3. View the hit ratio after several days of typical replication activity to gauge the ideal setting for the number of active statements. If the hit ratio is under 50 percent, increase the parameter value in a small increment of about 5 statements.
4. Monitor the hit ratio over the next few days. If the hit ratio increases, it means your applications are using all of the cursors allowed for active statements. Continue to increase the parameter value in small increments until the hit ratio remains constant.

Adjust open cursors

Valid for: Oracle targets

The value of the Oracle parameter OPEN_CURSORS needs to be set high enough to support the level of performance expected of the Post process. This parameter defines the maximum number of cursors that a process (such as Post) can open.

Internally, Post establishes its maximum total number of open cursors from the value of OPEN_CURSORS, minus the 10 required for routine calls. You view this value in the event_log. For the following example, OPEN_CURSORS is set to 512.

Notice: sp_opst_mt (for o.oracle-o.oracle queue oracle) Post will not open more than 502 cursors (OPEN_CURSORS – 10).

Post maintains a record of the number of cursors it has open. If Post detects that it will exceed the maximum number of cursors, it closes the least-recently used cursor in the least-recently used session.

To avoid running out of cursors, the Post process queries the OPEN_CURSORS value when it starts. If the value is not high enough, Post writes the following warning to the event_log:

Warning: (sp_opst_mt for o.oracle-o.oracle queue oracle)Oracle parameter 'OPEN_CURSORS' is < number. Check 'OPEN_CURSORS' setting.

The OPEN_CURSORS value can be modified or added if absent.

To view the OPEN_CURSORS value, query the database using the following SQL statement:

select value from v$parameter where name = 'open_cursors';

To estimate a value for OPEN_CURSORS that is high enough for the Post process

1. Estimate the peak number of concurrent transactions (sessions) that will be expected for the target instance. Post opens a session on the target system for each one on the source system. You can get a good estimate of the number of transactions by issuing the show post detail command in sp_ctrl when production is at its maximum level. The Number of Open Transactions field in the display shows the number of concurrent transactions.

2. Use the following formulas to determine the correct setting for OPEN_CURSORS to support SharePlex (and other applications that may be accessing the target data).

   SQL Cache enabled (default): By default, Post needs to reserve 10 cursors for routine calls that are closed once they finish, plus a minimum of 7 cursors per transaction (the base minimum of 2 plus an additional 5). The formula is:

   10 + (peak number of concurrent transactions x 7) = minimum open cursors needed

   SQL Cache disabled: The Post process needs to reserve 10 cursors for routine calls that are closed once they finish, plus a minimum of 2 cursors per transaction. The formula is:

   10 + (peak number of concurrent transactions x 2) = minimum open cursors needed

Skip maintenance DML

Valid for: Oracle targets

Large transactions that are applied by application patches or other internal Oracle operations can be omitted from replication if they are not relevant to the data needed by user applications. These operations can translate into thousands or millions of individual UPDATE or DELETE statements for SharePlex, all to be applied by Post. Such transactions can adversely affect Post performance and increase the latency between the source and target data that user applications need to perform their work. There may be reasons to prevent other DML operations from being posted to a target database.

There are two ways you can handle such transactions:

• Assuming there are no referential relationships between those operations and the user data, configure those operations to process through a dedicated named post queue. For more information, see Configure named post queues.
• Configure Post to skip the operations, and then apply the SQL statement directly through Oracle. See the following instructions.

To skip maintenance DML

1. On the source system, run the create_ignore.sql script from the util sub-directory in the SharePlex product directory. This script creates the SHAREPLEX_IGNORE_TRANS public procedure in the database. When executed at the start of the transaction, the procedure directs the Capture process to ignore the DML operations that occur until the transaction is committed or rolled back. Thus, the affected operations are not replicated. For more information about the script, its limitations, and how to run it, see create_ignore.sql in the SharePlex Reference Guide.
2. Edit your patch script to call SHAREPLEX_IGNORE_TRANS before UPDATE or DELETE operations. This allows SharePlex to ignore the transaction and not send it to the target. The script will also have to be run on the target to bring the database back into sync.

Note: Only DML operations are affected by the SHAREPLEX_IGNORE_TRANS procedure. It does not cause SharePlex to skip DDL operations, including TRUNCATE. DDL operations are implicitly committed by Oracle, so they render the procedure invalid.