立即与支持人员聊天
与支持团队交流

NetVault Plug-in for Standard Encryption 11.4 - User Guide

Installing the plug-in

You can install the plug-in simultaneously on multiple machines by using the configuration wizard. Alternatively, you can install a plug-in on a single client from the Manage Clients page.

The following sections describe the different procedures that you can use to install the plug-in:

•
Installing the plug-in using the push installation method (Windows)
•
Installing the plug-in using the configuration wizard (Linux/UNIX)
•
Installing the plug-in from the Manage Clients page
Installing the plug-in using the push installation method (Windows)

On Windows-based machines, you can use the push installation method to install the plug-ins on several machines at the same time. You can perform push installations from the NetVault Backup WebUI.

Before you start the push installation procedure, verify that the following requirements are met:

•
Copy the packages to a shared location: Copy the client and plug-in packages to a shared location. Only CIFS shares are currently supported as package stores. The path must be accessible to the NetVault Backup Server and all target machines where you want to install the packages.
Make sure that you use the original names of the installation packages. Renamed packages cannot be selected for push installations.
•
Configure a package store in NetVault Backup: After copying the installation packages, configure the shared location details in NetVault Backup. For more information, see the Quest NetVault Backup Administrator’s Guide.
To install the plug-in on Windows-based clients:
1
In the Navigation pane, click Guided Configuration, and then on the NetVault Configuration Wizard page, click Install Software/Add Clients.
2
On the Select Software/Add Clients page, select Install NetVault software on remote machines.
3
In the Package Store list, select the repository that contains the installation packages that you want to deploy.
4
To add plug-in packages, click Add NetVault plug-in package.
In the Select Packages for Deployment dialog box, select the check boxes corresponding to the “.npk” binary files that you want to use. The files names are listed in the following table (where x‑x‑x‑x represents the version, build, and platform numbers).
 
Encryption algorithm
Binary filename

CAST-128

cst-x-x-x-x.npk

CAST-256

cst2-x-x-x-x.npk

AES-256

aes-x-x-x-x.npk

Click OK, and then click Next.
5
On the Machines to Have NetVault Software Installed page, click Choose Machines, and select From available machines.
6
On the NetVault Machine Details tab, select the client that you want to add, and click OK.
7
To add more machines, repeat Step 5 and Step 6.
8
To submit the task, click Install Software/Add Clients.
You can monitor the progress and status of the task from the Deployment Task Status page. For more information, see the Quest NetVault Backup Administrator’s Guide.
Installing the plug-in using the configuration wizard (Linux/UNIX)

On Linux-based machines, you can use the configuration wizard to install the plug-in on multiple clients at the same time.

 
* 
NOTE: When you use this procedure, make sure that the plug-in binary file is compatible with the client OS and platform.
To install the plug-in on Linux- and UNIX-based clients:
1
In the Navigation pane, click Guided Configuration, and then on the NetVault Configuration Wizard page, click Install Plugins.
2
In the NetVault Backup Clients table, select the clients on which you want to install the plug-in.
3
Click Choose Plug-in File, and in the browse window, navigate to the location of the “.npk” installation file for the plug-in (on the installation CD or the directory to which the file was downloaded from the website).
4
Select the platform-specific binary file for the plug-in.
The files names are listed in the following table, where x‑x‑x‑x represents the version, build, and platform numbers.
 
Encryption algorithm
Binary filename

CAST-128

cst-x-x-x-x.npk

CAST-256

cst2-x-x-x-x.npk

AES-256

aes-x-x-x-x.npk

5
To begin installation, click Next.
After the plug-in is installed successfully, a message is displayed.
Installing the plug-in from the Manage Clients page

From the Manage Clients page, you can install a plug-in on a single client.

1
In the Navigation pane, click Manage Clients.
2
In the NetVault Backup Clients table, select the client, and click Manage.
3
At the lower-right corner of the Installed Plug-ins table, click the Install Plugin button ().
4
Click Choose Plug-in File, and in the browse window, navigate to the location of the “.npk” installation file for the plug-in (on the installation CD or the directory to which the file was downloaded from the website).
5
Select the platform-specific binary file for the plug-in. The files names are listed in the following table (where x‑x‑x‑x represents the version, build, and platform numbers).
 
Encryption algorithm
Binary filename

CAST-128

cst-x-x-x-x.npk

CAST-256

cst2-x-x-x-x.npk

AES-256

aes-x-x-x-x.npk

6
To begin installation, click Install Plugin.
After the plug-in is installed successfully, a message is displayed.

Removing the plug-in

1
In the Navigation pane, click Manage Clients.
2
In the NetVault Backup Clients list, select the client, and click Manage.
3
In the Installed Plug-ins table, select the item that you want to remove:
•
CAST-128 Encryption
•
CAST-256 Encryption
•
AES-256 Encryption
4
Click the Remove Plugin button ().
5
In the confirmation dialog box, click Remove.

 

Configuring the plug-in

•
Configuring default settings

Configuring default settings

1
In the Navigation pane, click Change Settings.
2
On the Configuration page, click Server or Client Settings, as applicable.
3
Under Plugins, click Encryption.
4
Configure the following settings.
 
Setting
Description

Encrypt ALL Backups on this Client

After the Plug‑in for Standard Encryption or Plug‑in for Advanced Encryption is installed on a client, you can do either of the following:

•
Encrypt all backups performed for that client.
•
Encrypt specific backups performed for that client.

To enable encryption for all backups, select this check box. When you enable encryption for all backups, you cannot change the setting on a per-job basis.

For more information about enabling encryption for specific backups, see Performing job-level encryption.

NOTE: To perform job-level encryption for backups originating from a NetVault Backup Server or Client, the plug-in should not be configured for encrypting all backups.

Encryption Key String

Type the string that serves as the encryption key for the NetVault Backup machine.

Different platforms allow varying characters and password lengths. Quest recommends that you use passwords of 32 characters or less. You can use characters from the following set: “A–Z”, “a–z”, “0–9”, and “_”. Key strings that do not conform to these specifications may work on one platform but may be invalid in another environment.

Available Encryption Algorithms

Select the encryption algorithm that you want to use for backups and restores. Depending on the products that you have installed, the list includes the following options: CAST-128, CAST-256, and AES-256.

5
To apply the new settings and close the dialog box, click Apply.
 
* 
NOTE: An encrypted backup can be restored to either its original location or to a new target machine. In either event, the plug-in must be installed on the target machine and it must be configured as it was when the backup was performed — using the same Encryption Key String and Encryption Algorithm.

 

相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级