立即与支持人员聊天
与支持团队交流

DR Series Software 4.0.3.1 - Administration Guide

Introducing the DR Series system documentation Introducing the DR Series system Setting up the DR Series system Configuring the DR Series system settings Managing containers Managing replications Monitoring the DR Series system Using GlobalView Configuring and using Rapid NFS and Rapid CIFS Configuring and using Rapid Data Access with NetVault Backup and with vRanger Configuring and using RDA with OST
Understanding RDA with OST Guidelines Terminology Supported RDA with OST software and components Best Practices: RDA with OST and the DR Series System Setting client-side optimization Configuring an LSU Installing the RDA with OST plug-in Configuring DR Series system information using NetBackup Backing up data from a DR Series system with NetBackup Using Backup Exec with a DR Series system (Windows) Understanding the OST CLI commands Understanding RDA with OST Plug-In Diagnostic Logs Collecting diagnostics by using a Linux utility Guidelines for gathering media server information
Configuring and using VTL Configuring and Using Encryption at Rest Support, maintenance, and troubleshooting Supported Ports in a DR Series system About us

Creating storage units by using the disk pool

Use the NetBackup GUI to create storage units by using the disk pools on the DR Series system.

Log in to NetBackup, and complete the following tasks:

1.
In the main window of the NetBackup Administrator console, click Storage in the left navigation pane, and select Storage Units.
2.
In the NetBackup Administrator console main window, right-click and select New Storage Unit from the drop-down list.
3.
In the New Storage Unit page, enter a name in Storage unit name, and select the OST disk pool that you created in the Disk pool drop-down list.
4.
Click OK to create the new storage unit.

Backing up data from a DR Series system with NetBackup

This topic describes how to use NetBackup to back up data from a DR Series system.

To back up data from a DR Series system using a policy, complete the following:

1.
Log into the NetBackup Administrator console.
2.
Click NetBackup Management in the left navigation pane, and select Policies.
3.
In the All Policies main window, right-click OST, and select Change Policy from the drop-down list.
The Change Policy page is displayed.
4.
In the Change Policy page, click the Attributes tab, and select the settings for the policy you want to create.
5.
Click OK to create the policy, which displays under OST in the main window.
6.
Right-click the policy, and select Manual Backup from the drop-down list.
The Manual Backup page is displayed.
7.
In the Manual Backup page, enter the name of the media server in Server, and click OK.

To monitor the status of any backup operation, click Activity Monitor in the left navigation pane of the NetBackup Administrator console, and select the backup job you are interested in to view details about the operation.

Restoring data from a DR Series system with NetBackup

This topic describes how to use NetBackup to restore data from a DR Series system. The process for restoring data from OST logical storage units (LSUs) is similar to how restores are performed from any backup device.

To restore data from a DR Series system, complete the following:

1.
Log into the NetBackup Administrator console.
2.
Click Backup, Archive, and Restore in the left navigation pane.
3.
In the Restore main window, click the Restore Files tab.

To monitor the status of any restore operation, click Activity Monitor in the left navigation pane of the NetBackup Administrator console, and select the restore job you are interested in to view details about the operation.

Duplicating backup images between DR Series systems with NetBackup

By using NetBackup with the DR Series system, you can duplicate backup images from a disk pool on one DR Series system to a target disk pool (or a storage unit derived from it) that could be on the same DR Series system or on a different DR Series system.

To duplicate backup images between DR Series systems using NetBackup, complete the following steps:

1.
Log into NetBackup Administrator console.
2.
Click NetBackup Management in the left navigation pane, and select Catalog.
3.
In the Catalog main window, select Duplicate from the Action drop-down list, and click Search Now.
The Search Results pane is displayed, which lists images from which you can choose to duplicate.
4.
Right-click to select the image in the Search Results pane that you would like to duplicate, and select Duplicate in the drop-down list.
The Setup Duplication Variables page is displayed.
5.
In the Setup Duplication Variables page, select the LSU that is the target DR Series system in the Storage unit drop-down list, and click OK.
a.
Click Activity Monitor in the left navigation pane of the NetBackup Administrator console.
相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级