Before you can start the installation process for the RDA with OST plug-in, you need to understand its role. The plug-in must be installed on to the media server type you choose. (For details on supported platforms, see the DR Series System Interoperability Guide.) The RDA with OST plug-in software enables integration between DR Series system data storage operations and the supported data management applications (DMAs).
You can download the RDA with plug-in installer from the Quest website as follows:
• |
Go to support.quest.com/dr-series, select your specific DR Series model and then navigate to Software Downloads. |
The RDA with OST plug-in must be installed in the following directory on the designated Windows-based media server running the supported Microsoft Windows server operating system software: $INSTALL_PATH\VERITAS\Netbackup\bin\ost-plug-ins for NetBackup installations, and $INSTALL_PATH\Veritas\Backup Exec\bin\ for Backup Exec installations. After it is downloaded, you can use SETUP to install the RDA with OST plug-in.
• |
The Backup Exec installation must be running on one of the supported Windows media server platforms. For information on the supported versions of Backup Exec and operating systems, see the DR Series System Interoperability Guide, available at support.quest.com/dr-series. |
• |
The Windows RDA with OST installer must be downloaded. If not, download the Windows installer (QuestOSTPlugin-xxxxx.msi), which is available at support.quest.com/dr-series, to a network directory location you can access. |
To install the RDA with OST plug-in, complete the following steps:
1. |
2. |
3. |
4. |
5. |
6. |
7. |
8. |
9. |
2. |
This NetBackup command lists the plug-in details, as shown in the following example:
1. |
2. |
3. |
4. |
© ALL RIGHTS RESERVED. 使用条款 隐私 Cookie Preference Center