立即与支持人员聊天
与支持团队交流

NetVault 11.4.5 - CLI Reference Guide

Introduction Getting started Using the command-line utilities Using the nvreport utility

nvsmartdisk

Performs the following functions:

Table 32. nvsmartdisk

--add

Adds a Quest NetVault SmartDisk. Use the following options with -add.

--host: Specifies the DNS name or IP address of the host on which the Quest NetVault SmartDisk is installed. You must configure this option even if the device is deployed on the NetVault Backup Server. The device is not added if the NetVault Server is unable to resolve the host name.
--force: Adds a Quest NetVault SmartDisk even if the device is already added to another NetVault Backup Server with the same name. This option can be useful if you have performed a disaster recovery to rebuild the NetVault Backup Server.
--port: Specifies the port for communicating with the Quest NetVault SmartDisk instance. This option is only required if device is configured to use a non-default port.
--server: Specifies the name of the NetVault Backup Server to which you want to add the device. This option is not required if you are running the command on the server.

--remove

Removes a Quest NetVault SmartDisk. Use the following options with -remove.

--device: Specifies the name of the Quest NetVault SmartDisk as it appears in the NetVault WebUI, CLI, and reports.
--force: Removes a Quest NetVault SmartDisk even if the device cannot be contacted or some other errors block the removal.

--list

Lists the machine names of all Quest NetVault SmartDisk instances added to the NetVault Backup Server.

Media-specific utilities

nvblankmedia

Blanks a piece of media.

nvbulkblankmedia

Blanks one or more media items in the specified library.

The document was helpful.

选择评级

I easily found the information I needed.

选择评级