1 |
In the Navigation pane, click Guided Configuration, and then on the NetVault Configuration Wizard page, click Add Storage Devices. |
2 |
4 |
On the Add Shared virtual tape library page, provide the following details. |
Select the target drive. Depending on the operating system, the list includes the following items:
| |||||||
Indicates whether the selected disk was previously formatted as an SVTL. | |||||||
Type or select the total number of slots that hold the media. | |||||||
Type or select the media size. The media size is specified in MiB. |
5 |
To determine the disk space requirements for the SVTL, click Calculate Size Required. If the required disk size is larger than the actual disk size, reduce the Media Items and Media Capacity. |
6 |
Click OK. |
• |
Password: Type the NetVault password for the server. |
• |
Confirmation Phrase: Type the text FORMAT SVTL. |
9 |
To assign the drives to different clients or to share the drive with multiple clients, click Add Drives Manually, and complete the following steps: |
a |
In the Choose Machine table, select the client to which the drive is attached. If the device is connected to multiple clients, select any one client. Click Next to scan the selected client and list the attached devices. |
b |
c |
If the device is connected to multiple clients (for example, in a SAN setup), all host clients are listed in the Choose Machines table. To share the drive with multiple clients, select the additional clients in the Choose Machines table, and click Next. |
2 |
On the Add Storage Devices page, select the Shared virtual tape library option and the Re-add previously generated virtual device check box. |
3 |
In the list of NetVault machines, select the machine on which the device was created. Click Next to scan the selected client and list the discovered SVTLs. |
4 |
6 |
To assign the drives to different clients or to share the drive with multiple clients, click Add Drives Manually, and complete the following steps: |
a |
In the Choose Machine table, select the client to which the drive is attached. If the device is connected to multiple clients, select any one client. Click Next to scan the selected client and list the attached devices. |
b |
c |
If the device is connected to multiple clients (for example, in a SAN setup), all host clients are listed in the Choose Machines table. To share the drive with multiple clients, select the additional clients in the Choose Machines table, and click Next. |
This section includes the following topics:
© 2024 Quest Software Inc. ALL RIGHTS RESERVED. 使用条款 隐私 Cookie Preference Center