立即与支持人员聊天
与支持团队交流

KACE Systems Deployment Appliance 9.1 Common Documents - Administrator Guide

About the KACE Systems Deployment Appliance Getting started Using the Dashboard Configuring the appliance Setting up user accounts and user authentication Configuring security settings Preparing for deployment Managing device inventory Using labels Creating a Windows or Linux Boot Environment Managing drivers Capturing images Capturing user states Creating scripted installations Creating a task sequence Automating deployments Performing manual deployments Managing custom deployments Managing offline deployments About the Remote Site Appliance Importing and exporting appliance components Managing disk space Troubleshooting appliance issues Updating appliance software Glossary About us Legal notices

Add KACE Agent Installer

Add KACE Agent Installer

You can download the KACE Agent file to a local directory, then upload the installer as a single file or a ZIP archive to run as a post-installation task. The appliance runs the task in the runtime environment that you specify.

You can assign the Apply KUID to KACE Agent post-installation task to prevent a duplicate asset on the KACE Systems Management Appliance if the KUID of the KACE Agent that was installed on the target device was not maintained. The KACE Agent software is in the \\KACE_Systems_Management_Appliance_host_name\client\agent_provisioning directory. For an explanation of available command-line options and Agent configuration properties, see the KACE Systems Management Appliance Administrator Guide. The KACE Agent does not require .NET 4.0 to install.

1.
On the left navigation pane, click Library to expand the section, then click Post-installation Tasks to display the Post-installation Tasks page.
2.
Select Choose Action > Add SMA Agent Installer to display the KACE Agent Installer detail task page.
3.
In Name, change the name to identify the task, for example KACE Agent for Windows.
4.
Select a Runtime Environment. See About runtime environments.
5.
Next to Upload, click Browse to select the appropriate file.
6.
In Full Command Line, enter the command-line parameters for the task.
7.
Select the Reboot Required check box to reboot the appliance and run the next task in the sequence.
8.
In Expected Return Code, enter a code that the task should return, if applicable. Otherwise, leave the default value of zero '0'.
In general, most tasks exit with a zero '0' code, indicating success, but you can set it to any positive value, as applicable. Some installers exit with a different code, even when the install is successful. For example, anti-virus installers are typically successfully installed but exit with a different return code because they require a device reboot.
9.
In Notes, add a note to identify the task.
10.
Click Save.
The task is now available to assign to scripted installations, sysprepped system images, and non-sysprepped system image deployments.
See Assign tasks to scripted installation deployment or Assign tasks to system deployment.

Add Windows Script

Add Windows Script

You can run Windows scripts as a pre-installation, mid-level, or post-installation task in the KACE Boot Environment (Windows) runtime environment.

1.
Complete one of the following steps:
a.
On the left navigation pane, click Library to expand the section, then click Pre-installation Tasks to display the Pre-installation Tasks page.
b.
On the left navigation pane, click Library to expand the section, then click Mid-level Tasks to display the Mid-Level Tasks page.
c.
On the left navigation pane, click Library to expand the section, then click Post-installation Tasks to display the Post-installation Tasks page.
2.
On the list page that appears, selectChoose Action > Add Windows Script.
3.
On the page that appears, in Name, enter a logical name for the task, such as Collect computer information before formatting.
4.
Next to Upload, click Browse to select the appropriate file, such as a VBScript or a JavaScript.
5.
Select the Reboot Required check box to reboot the appliance and run the next task in the sequence.
6.
In Expected Return Code, enter a code that the task should return, if applicable. Otherwise, leave the default value of zero '0'.
In general, most tasks exit with a zero '0' code, indicating success, but you can set it to any positive value, as applicable. Some installers exit with a different code, even when the install is successful. For example, anti-virus installers are typically successfully installed but exit with a different return code because they require a device reboot.
7.
In Notes, add a note to identify the task.
8.
Click Save.
The task is now available to assign to scripted installations, sysprepped system images, and non-sysprepped system image deployments.

Working with task groups

Working with task groups

Add task group

Task groups allow you to create a sequence of common tasks to build and capture a system image.

You can easily reuse a task group, when needed, to create system images of the same type and function. For example, you can create a task group that builds a Microsoft Windows 10 system with a Microsoft Office suite, and associate one or more task groups with system images and scripted installations each time you need to re-create a common deployment scenario.

Add task group

Add task group

A default installation includes two sample task groups for partitioning and formatting a drive for Mac OS X and Windows. You can add and manage task groups that best suit your business needs, to easily reuse common deployment scenarios, and associate task groups with system images, scripted installations, or custom deployments, as applicable.

The process of creating tasks for Mac OS X, Windows, and Linux are the same, however the collection of tasks available for these two operating systems is different, and it only contains the tasks that apply to the respective runtime environment.

1.
On the left navigation pane, click Library to expand the section, then click Task Groups to display the Task Groups page.
2.
Complete one of the following steps:
a.
To create a group of Windows tasks, select Choose Action > New Windows Task Group.
b.
To create a group of Mac OS X tasks, select Choose Action > New Mac OS X Task Group.
c.
To create a group of Linux tasks, select Choose Action > New Linux Task Group.
The Task Group Detail page appears.
3.
In the Name field, type the name of the task group.
4.
Optional. In the Notes field, provide additional information, if required.
5.
Under Installation Plan, add the tasks in the order that you want the tasks to run.
To add a task to the installation plan, drag and drop it to the left column, click the plus sign, or double-click the task in the right column, as desired.
Available tasks are sorted alphabetically in each list on the right. If there are more than six available tasks in a list, expand the drawer to see the entire list, or scroll up or down, as needed.
a.
Add tasks from the Available Pre-installation Tasks column to the Run Pre-installation Tasks column.
* 
NOTE: If you choose to erase the drive contents, ensure that the Format C task follows the Create Single Partition task.
b.
Add tasks from the Available Mid-Level Tasks column to the Run Mid-Level Tasks column.
c.
Add tasks from the Available Post-installation Tasks column to the Run Post-installation Tasks column.
* 
TIP: Filters are available for each task type. For example, to look for a specific pre-installation task, in the Available Pre-Installation Tasks column, in the Filter Pre-Installation Tasks field, type the task name.
* 
TIP: To remove a task from the installation plan, drag and drop it to the right column, click the minus sign, or double-click the task in the left column.
* 
TIP: To remove all tasks from a column, click the button in the column header, on the right. For example, to remove all assigned pre-installation tasks, in the Run Pre-Installation Tasks column, in the column header bar, click Remove all Pre-Installation Tasks.
6.
Complete one of the following steps:
◦
To create a copy of this task group, click Duplicate.
◦
To save your changes, click Save.
相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级