立即与支持人员聊天
与支持团队交流

Recovery Manager for Exchange 5.8.6 - Release Notes

Release Notes

Quest® Recovery Manager for Exchange 5.8.6

Release Notes

These release notes provide information about the Quest® Recovery Manager for Exchange release.

Topics:

About Recovery Manager for Exchange

Quest Recovery Manager for Exchange rapidly and efficiently finds and recovers business-critical Exchange Server and Lotus Domino data. Organizations can reduce the cost of e-Discovery in addition to providing granular, message-level data recovery services.

By using Recovery Manager for Exchange, you can selectively retrieve items from online Exchange Servers, offline Exchange Server and Lotus Domino databases, and Personal Folders (.pst) files. The retrieved items can then be directly restored to a production Exchange Server or to .pst, .eml, .msg, or .txt files.

Recovery Manager for Exchange provides a search system to perform context-based searches in live Exchange Server mailboxes and public folders, offline Exchange Server and Lotus Domino databases, and Personal Folders (.pst) files using keywords and other search criteria. Rather than retrieving all data from a server, database, or file, you can retrieve only what is needed.

Recovery Manager for Exchange entirely eliminates the need for a recovery Exchange Server, making it easier for you to gain access to an offline Exchange Server database. You can restore an Exchange Server database from backup to any folder, and then access the database to search and selectively restore the data you need.

Recovery Manager for Exchange integrates with Quest® Archive Manager®, allowing you to quickly and easily export messages from Exchange Server databases, Lotus Domino databases, and Personal Folders (.pst) files into Archive Manager.

Resolved Issues

Table 1: General resolved issues

Resolved Issue Issue ID

CVE-2021-44228
Server hosting the RME installation reported old versions of log4j files found.

 349530/CSR 5032456-1

Known Issues

The following is a list of issues, including those attributed to third-party products, known to exist at the time of release.

Table 2: General known issues

Known Issue Issue ID

When you use the Add Storage Wizard to register a .pst file, the registration operation may fail with the error “Format of the following file is not supported: '<full path to .pst file>'.” This problem occurs if the .pst file you are trying to register is password-protected. The expected behavior is that while the registration operation is in progress, the Add Storage Wizard should prompt you to type a password for the password-protected .pst file.

WORKAROUND

  1. Use Outlook to open the password-protected .pst file you want to register.
  2. Type the password for the .pst file when prompted by Outlook.
  3. Keep the file open in Outlook.
  4. Use the Add Storage Wizard to register the .pst file as a storage. For more information, see the User Guide supplied with this release of Recovery Manager for Exchange.
3322

Renaming the Recovery Manager for Exchange computer may result in Recovery Manager for Exchange being unable to connect to its database on SQL Server.

WORKAROUND

CAUTION: The next steps involve making changes to the system registry. Incorrectly editing the registry may severely damage your system. Before making changes to the registry, you should back up any valued data on the computer.

  1. Locate the ConnectionString registry value in each of the following sub-keys of the HKLM\SOFTWARE\Quest\Recovery Manager for Exchange registry key: - Backup Catalog - EDB Information - Storages
  2. In each of these three sub-keys, modify the ConnectionString value data to replace the old name of the Recovery Manager for Exchange computer with the current name of the computer.
4646

Registration of Exchange Server database extracted from backup may fail with the following error: “Unable to initialize Jet engine and retrieve information about <path to .edb file>: No such database (Source: “ExchDB.ExchDB.1”).” This problem occurs in a situation where the full path to the extracted Exchange Server database includes non-English characters.

WORKAROUND 1

  1. Take note of the path to the extracted Exchange Server database. This is the same path as the path to .edb file provided in the error message quoted in the description of this problem.
  2. Create a new folder on the root of the local drive where Recovery Manager for Exchange is installed and move the extracted Exchange Server database to that folder.
  3. Make sure the full path to the Exchange Server database does not include any non-English characters.
  4. Start the Add Storage Wizard and register the offline .edb file from the folder to where you moved the extracted Exchange Server database. For more information, see the User Guide supplied with this release of Recovery Manager for Exchange.

WORKAROUND 2

  1. Extract the Exchange Server database from the backup with the backup software that was used to create that backup.
  2. Make sure the full path to the extracted Exchange Server database does not include any non-English characters.
  3. Start the Add Storage Wizard and register the offline .edb file from the folder to where the Exchange Server database was extracted. For more information, see the User Guide supplied with this release of Recovery Manager for Exchange.
7963

When restoring a folder whose name includes a backslash, for example, One\Two, you may get the following unexpected result: In the target storage, the folder One\Two being restored appears as a folder named One with a subfolder named Two.

WORKAROUND

Manually change the folder structure in the target container as appropriate.

37861

After you have deleted a registered source storage based on an Exchange Server database from the Recovery Manager for Exchange console tree, you may get the following unexpected result: The log and patch files belonging to the database still remain in the location to where the database was extracted from backup during the registration operation.

WORKAROUND

To delete a source storage with all its associated Exchange Server database files:

  1. Before you proceed with the delete operation, right-click the source storage you want to delete in the console tree, and select Properties.
  2. In the dialog box that opens, take note of the Path field value. This is where the database files were extracted at the time of the database registration. By default, the path is <Disk>:\Recovery Manager Sources\<DatabaseLocation> where <DatabaseLocation> is the folder holding the associated Exchange files for the source storage you want to delete.
  3. Delete the source storage from the console tree.
  4. Manually delete the folder represented as <DatabaseLocation> in step 2 of this procedure.
40735

Your attempt to register an Exchange Server database from a recovery storage group (RSG) may fail with the following error message that incorrectly describes the problem: “Cannot access the file <FileName> because it is being used by another process.” In fact, this error message indicates that the database you attempt to register from RSG is currently mounted.

WORKAROUND

Manually dismount and then register the database.

49340

Your attempt to export messages to the .eml, .msg, or txt format may permanently fail with the following error message that fails to describe the problem correctly:

“Illegal characters in path.”

In fact, this error message may display when the names of the source storage folders from which you export data are identical to reserved names in Windows, for example, AUX, PRN, NUL, CON, LPT1, or COM1. This problem only occurs if during the export operation you retain the original source storage folder structure.

WORKAROUND

Perform the export operation without retaining the source storage folder structure.

56055

You may receive the following error message when using the Access online Exchange Server option to register a storage from a recovery storage group located in an Exchange cluster: “Registration of storage <Path to .Edb> has failed. Details: System.IO.IOException: The network path was not found.”

WORKAROUND

  1. Copy the database you want to register to the Recovery Manager for Exchange computer.
  2. Start the Add Storage Wizard, click Next, and use the Access offline Exchange database, Domino databases, or .pst files option to register the database in question.
100747

When attempting to catalog removable storage media by using the Microsoft Removable Storage library option in the Catalog Wizard, you may receive the “Class not registered” error message that fails to describe the problem properly. In the situation in question, this error message indicates that the Removable Storage Manager (RSM) feature is disabled on the Recovery Manager for Exchange computer.

WORKAROUND

Enable the Removable Storage Manager (RSM) feature on the Recovery Manager for Exchange computer.

103865

Your attempt to export messages to individual .msg files may fail with the following error message: “An error occurred while processing the message with subject “<subject>” from “<location>”. Details: The system cannot find the path specified.”

WORKAROUND

CAUTION: The next steps involve making changes to the system registry. Incorrectly editing the registry may severely damage your system. Before making changes to the registry, you should back up any valued data on the computer.

  1. On the Recovery Manager for Exchange computer, start Registry Editor: Click Start, then click Run, type regedit, and click OK.
  2. Do one of the following:
    • In a 32-bit edition of Windows, expand the appropriate nodes to locate and select the subkey HKLM\SOFTWARE\Quest\Recovery Manager for Exchange\EnableExtraRecipientsProcessing
    • In a 64-bit edition of Windows, expand the appropriate nodes to locate and select the subkey HKLM\SOFTWARE\Wow6432Node\Quest\Recovery Manager for Exchange\EnableExtraRecipientsProcessing
  3. From the main menu, select Edit | Modify.
  4. In the dialog box that opens, under Value data, change the value to false, and click OK.
104115

You may receive the following uninformative error message when on the Specify Backed Up Exchange Server page in the Add Storage Wizard you specify an Exchange Server located in an Active Directory domain different from the one where Recovery Manager for Exchange is installed:

“Value cannot be null. Parameter name: backedUpExchange”.

WORKAROUND

Join the Recovery Manager for Exchange computer to the domain where the backed up Exchange Server resides or installRecovery Manager for Exchange on a computer in that domain.

104375

Your attempt to register an Exchange Server recovery database or database from a recovery storage group may permanently fail with the following error message: “Unable register storage <StorageName>. The file cannot be accessed by the system.” This problem occurs when the account under which the Recovery Manager Console is running does not have sufficient access rights on the target Exchange Server.

WORKAROUND

Do one of the following:

  • Start the Recovery Manager Console under an account that has Read access right to the files located on the Exchange Server database files you want to register.
  • Copy the .edb file you want to register to a location on which the account under which the Recovery Manager Console is running has Read access right, and then register the file from there.
119836

You may encounter the following problem after you click the Add button on the Add Mailboxes page in the Add Storage Wizard, and then select an Exchange Server: The Mailboxes list is empty, although there are mailboxes hosted on the Exchange Server you selected.

This problem occurs when the domain that includes the Exchange Server does not have any global catalog servers.

WORKAROUND

Add a global catalog server to the domain, and then retry the mailbox registration operation.

130601

You may experience the following issue on a Windows Server 2008-based computer where the Desktop Experience feature is installed: When started, Recovery Manager for Exchange may display an error message reading that Microsoft Outlook is not set as the default e-mail client, whereas it actually is.

WORKAROUND 1

Uninstall the Desktop Experience feature, and then start Recovery Manager for Exchange.

WORKAROUND 2

CAUTION: The next steps involve making changes to the system registry. Incorrectly editing the registry may severely damage your system. Before making changes to the registry, you should back up any valued data on the computer.

  1. Use Registry Editor to open one of the following registry keys: - If the Recovery Manager for Exchange computer is running a 32-bit edition of Windows Server 2008, open the HKLM\SOFTWARE\Clients\Mail registry key. - If the Recovery Manager for Exchange computer is running a 64-bit edition of Windows Server 2008, open the HKLM\SOFTWARE\Wow6432Node\Clients\Mail registry key.
  2. Set the (Default) entry value to Microsoft Outlook.
  3. Start Recovery Manager for Exchange.
152326

Unexpected behavior when you uninstall Recovery Manager for Exchange: the Recovery Manager for Exchange Setup program may unexpectedly delete all .log files from the folder where Recovery Manager for Exchange stores its .log files. Thus, if the folder includes .log files of other applications, they also get deleted.

WORKAROUND

Make sure that the folder where Recovery Manager for Exchange stores its .log files does not include any .log files of other applications.

154521

You may encounter the following issue when using the Import .Pst Files Wizard: If you select the Delete source file after successful import check box, Recovery Manager for Exchange fails to delete the Personal Folders (.pst) file and returns an error message reading that the file is locked.

WORKAROUND 1

Locate the Personal Folders (.pst) file and delete it manually.

WORKAROUND 2

Disable the Windows Search service on the Recovery Manager for Exchange computer:

Open the Services tool.

In the list of services, right-click Windows Search, and then click Properties.

On the General tab, from the Startup type list, select Disabled, and then click OK.

156484

Unexpected behavior in the Import .Pst Files Wizard when you attempt to match Personal Folders (.pst) files to online mailboxes by owner: The wizard may fail to match the source Personal Folders (.pst) files to the mailboxes that satisfy the matching criteria. This issue affects only those Personal Folder (.pst) files that were created by a user account that is a member of the local Administrators or Domain Administrators group.

WORKAROUND

Match the files to mailboxes manually or by file name.

185536

Your attempt to compare an item to an entire online Exchange store may fail with the error “The client operation failed.” This issue only occurs when the user account under which you are running the Recovery Manager for Exchange console does not have access to some or all mailboxes in the Exchange store.

WORKAROUND

Make sure the account you are using has access to all mailboxes in the Exchange store.

194295

You may encounter the following issue when registering an offline Exchange Server database (.edb file) as a storage: The storage registration fails with the error “Non-database file or corrupted DB.” This issue only occurs when the Recovery Manager for Exchange computer runs a Windows version different from that installed on the Exchange Server whose offline database you attempt to register as a storage.

WORKAROUND 1

  1. Install Recovery Manager for Exchange on a computer that runs the same Windows version as the Exchange Server whose database you want to register.
  2. Retry the storage registration operation.

WORKAROUND 2

  1. Perform a hard repair operation on the Exchange Server database you want to register, and then try to register the database.
  2. If the registration operation still fails, use the Add Storage Wizard to defragment the Exchange Server database, and then register the database as a storage.
218192

Your attempt to open a registered storage based on an online Exchange Server mailbox may fail with the error “Could not connect to mailbox <MailboxName> on server <ServerName>. Details: Undefined MAPI error. Detailed description is not available.”

This issue only occurs when the Exchange Server mailbox is located on an Exchange Server 2007 and IPv6 is enabled both on the Exchange Server and on the computer running Recovery Manager for Exchange.

WORKAROUND

Disable IPv6 on the Recovery Manager for Exchange computer.

244592

Your attempt to preview a meeting or task request in the Recovery Manager Console may fail with the error “The operation failed. An object cannot be found.” This issue only occurs if Outlook 2013 is installed on the Recovery Manager for Exchange computer.

WORKAROUND

To preview the meeting or task request:

  1. Export the request to an .msg file.
  2. Open the .msg file in Outlook.
268299

Unexpected behavior when the Find View is in the Advanced Mode: When you use the Sent To field to search by SMTP e-mail address, your search may return no results, although the source storages do contain messages that meet your criteria.

WORKAROUND

Use the Find View in the Standard Mode.

285067

You may not be able to close a note item that is open in the Recovery Manager Console: Clicking the cross (x) button in the upper-right corner of the note item window has no effect. If you right-click the item window to select Close from the context menu, you may encounter the error “Could not complete the operation because the service provider does not support it.”

WORKAROUND

To close the note item window, press the ESC key.

298448

 

Table 3: Automated tasks known issues

Known Issue Issue ID

When simultaneously running several automated tasks that restore data, you may experience the following problem: The tasks fail or complete with errors, returning any of the following error messages on the Output tab in the Task Manager View:

“Operation <OperationName> failed. Details: Violation of PRIMARY KEY constraint 'PK_Stores'. Cannot insert duplicate key in object 'dbo.Stores'. The statement has been terminated.”

“Operation <OperationName> failed. Details: Someone else deleted this index while you were updating it.”

“An error occurred while processing the message with subject “<Subject>” from “<Path>”. Details: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.”

“Operation <OperationName> failed. Details: Could not process one or more databases.”

WORKAROUND

Run one data restoration task at a time.

58869

An automated task that is configured to restore messages to .pst files may permanently fail. This problem occurs when all of the following conditions are true:

  • You set a custom maximum size limit for the target .pst files.
  • The messages being restored are grouped by their source folder or mailbox.

WORKAROUND

Restore the data using one of the Recovery Manager for Exchange restore wizards.

99218

An automated task that restores data to an online Exchange mailbox may fail to run on a schedule, returning the error “Cannot connect to mailbox.” This problem occurs when the target mailbox is in a domain that is different from the one where RRecovery Manager for Exchange is installed.

WORKAROUND

Run the task manually:

  1. In the Recovery Manager for Exchange console tree, select the Task Manager node.
  2. In the task list in the right pane, click the task you want to run.
  3. Click the Run Now button.
165223

Unexpected behavior when you run an automated task to restore messages from an offline Exchange Server database: The task completes without any errors but does not restore some messages.

WORKAROUND

Use the Recovery Manager Console or cmdlets provided by the Recovery Manager for Exchange Management Shell to restore the messages in question.

215355

 

Table 4: Management Shell known issues

Known Issue Issue ID

The Attach-RMEExchangeMailbox cmdlet may return the following error message:

“Could not connect to mailbox <Mailbox> on server <Server>. Details: Microsoft Exchange is not available. Either there are network problems or the Exchange computer is down for maintenance.” You encounter this issue when all of the following is true:

  • The user name and password with which you attempt to connect are not stored in the Windows operating system (for example, by using the Store User Names and Passwords feature or the Credential Manager feature).
  • You are using the Attach-RMEExchangeMailbox cmdlet to connect to a mailbox located in a domain different from the one to which the Recovery Manager for Exchange computer is joined.

WORKAROUND

Store the user name and password with which you want to access the mailbox by using the functionality provided by the Windows operating system. To store the user name and password in 2007 or later version of Windows, use the Credential Manager feature of Windows.

136923

Table 5: Web Interface known issues

Known Issue Issue ID

Message export to a .txt, .eml, or .msg file performed in the Web Interface may fail with the following error:

“The Compressed Folder is invalid or corrupted.” This problem occurs when the subject of the message being exported exceeds 260 characters.

WORKAROUND

To export the message, use the Recovery Manager Console.

125957

Your attempt to open a storage based on a .pst file in the Web Interface may fail with the following error message: “The file <file name> could not be created or opened.”

This problem occurs when the .pst file is in use by another application or the storage based on the file is open in the Recovery Manager Console.

WORKAROUND

Make sure that

  • The .pst file is not in use by any application.
  • The storage based on the .pst file is closed in the Recovery Manager Console.
125964

You may encounter the following non-informative error message when using the Recovery Manager for Exchange Web Interface to register an online Exchange server mailbox as a storage: “[SFxServerDidNotReply]”

This problem only occurs if the online mailbox is located in an Active Directory domain different from the one where Recovery Manager for Exchange is installed.

WORKAROUND

To register the mailbox as a storage, use the Recovery Manager Console. For more information, see the “Registering a Storage” section in the Recovery Manager for Exchange User Guide.

136165

You may encounter the following error message when using the Recovery Manager for Exchange Web Interface to open a registered storage: “Retrieving the COM class factory for component with CLSID {<ID>} failed due to the following error: <ErrorID>.”

This problem occurs if you change the display language on the computer where Recovery Manager for Exchange is installed without restarting the computer.

WORKAROUND

Restart the Recovery Manager for Exchange computer, and then use the Recovery Manager for Exchange Web Interface.

137672

Unexpected behavior when you specify a nonexistent new folder in the Web interface output folder option on the Web Interface tab in the Settings dialog box, and then click OK: Recovery Manager for Exchange does not create the folder.

WORKAROUND

Create the folder manually.

154377

Unexpected behavior in the Recovery Manager for Exchange Web Interface: Keyboard input fails to work in the text boxes when you attempt to type in the Japanese, Korean, or Chinese language.

WORKAROUND 1

  1. Create a .txt file (for example, in Notepad).
  2. In the .txt file, type the text you want to insert into the Web Interface, and then copy and paste the text into the appropriate Web Interface text box.

WORKAROUND 2

NOTE: This workaround disables the shortcut menus in the Recovery Manager for Exchange Web Interface.

  1. Open the Recovery Manager for Exchange installation folder (by default, this is %ProgramFiles%\Quest\Recovery Manager for Exchange).
  2. Locate the Default.htm file, and then open the file in a text editor (such as Notepad).
  3. In the file, change the Windowless parameter value for the Silverlight object from TRUE to FALSE.
  4. Save changes and close the file.
266162

An issue in the Web Interface: Your attempt to browse a storage based on a Lotus Domino database (.nsf) file may fail with the error “This database is currently in use by another person or process, and cannot be accessed at this time.” This occurs if the same storage is concurrently open in the Recovery Manager Console.

WORKAROUND

  1. Close the storage in the Recovery Manager Console: Right-click the storage, and then click Close on the shortcut menu.
  2. Browse the storage in the Web Interface.
344384

Table 6: Third-party known issues

Known Issue Issue ID

Your attempt to register Exchange Server databases from a compressed backup created with Veritas NetBackup 6.5 may fail with the following error message: “Failed to process backup media: The next file media was not found in the folder '<FolderName>'.”

WORKAROUND

  1. Use Veritas NetBackup 6.5 to extract the Exchange Server databases from the compressed backup to a recovery storage group on a live Exchange Server.
  2. Use the Add Storage Wizard to register the Exchange Server databases (.edb files) from the recovery storage group to which you extracted data in step 1.
100185

Your attempt to directly access Exchange Server backups created with EMC Legato NetWorker 7.4.4 may permanently fail with the error “Column ID is constrained to be unique.”

WORKAROUND

To register storages from such backups, use the instructions provided in the “Working with EMC Legato NetWorker” section in the Recovery Manager for Exchange User Guide.

108087

Your attempt to use the Exchange Server Emulation feature to extract and register Exchange Server databases from backups created with CA BrightStor ARCserve Backup 12.5 may permanently fail. This problem occurs when Recovery Manager for Exchange and ARCserve Backup 12.5 are installed on the same computer and the ARCserve Backup Manager window is open while you are performing the storage registration operation.

WORKAROUND

Follow these steps to register storages:

  1. Start Exchange Server emulation.
  2. Restart the ARCserve Backup Manager.
  3. Proceed with the storage registration operation.
110152

Exchange Server emulation may fail when the 8.3 naming convention (short file and directory names) is disabled on the Recovery Manager for Exchange computer.

WORKAROUND

Ensure the 8.3 naming convention is enabled. For details, see the documentation for your version of Windows.

135788

When using Exchange emulation to extract and register two or more Exchange databases from a backup created with NetBackup 7.0.1, you may encounter the following issue: The extract operation fails after the first database has been successfully extracted.

WORKAROUND

Extract and register the Exchange databases one at a time.

138642

Your attempt to register Exchange Server databases from a backup created with Windows Server Backup may fail with the error “The backup destination is not readable.”

WORKAROUND

  1. Use Windows Server Backup to extract the Exchange Server databases from the backup into a custom location. For more information, see the documentation for your version of Windows Server Backup.
  2. In the Recovery Manager Console, start the Add Storage Wizard (select the Recovery Manager for Exchange console tree root, and then click Register Storages in the right pane.
  3. Step through the wizard until you are on the Select How to Add Storages page.
  4. Click the Access offline Exchange database, Domino databases, .pst files, or Archive Manager instance option, and then step through the wizard to register the Exchange Server databases you extracted in step 1.
159111

Your attempt to register storages from backups created with EMC NetWorker by using the Access Exchange and/or Domino backups directly option in the Add Storage Wizard may fail with the error “Catastrophic failure.” This issue only occurs if the backup media contains both Exchange and non-Exchange backups.

WORKAROUND

To register storages, either connect to NetWorker backup server or use Exchange emulation. For more information on each of these methods, see the “Working with EMC Legato NetWorker” section in the Recovery Manager for Exchange User Guide.

163389

Unexpected result when you export messages from an Archive Manager instance to Text (.txt) files: Message bodies may be missing from the target Text (.txt) files. This problem only affects messages whose bodies have HTML format or Rich Text Format (RTF).

WORKAROUND

  1. Restore messages from the Archive Manager instance to a Personal Folders (.pst) file.
  2. Export the messages from the Personal Folders (.pst) file to Text (.txt) files.
164810

Your attempt to use Exchange emulation to extract and register Exchange Server databases from a backup created with NetBackup 7.5 may cause Recovery Manager for Exchange to stop responding.

This issue only occurs when you attempt to start Exchange emulation two or more times in a row.

WORKAROUND

Restart the Recovery Manager Console, and then start Exchange emulation.

218188

You may encounter the following issue when using Exchange emulation to restore an Exchange Server database from a backup created with NetVault Backup: The restore operation fails with the following error being displayed in the NetVault Backup console: “Fatal error: Restore failed”.

This issue only occurs when Windows Management Framework 3.0 which includes Windows PowerShell 3.0 is installed on the computer running Recovery Manager for Exchange.

WORKAROUND

Uninstall Windows Management Framework 3.0, and then retry the restore operation.

 251988

When you use Exchange emulation to register multiple Exchange Server databases from backups created with ARCserve, the registration may fail. This issue occurs if the ARCserve agent installed on the Recovery Manager for Exchange computer is incompatible with the versions of Exchange Server from which the databases originate. In this situation, Recovery Manager for Exchange does not perform any checks to confirm the compatibility of the agent.

WORKAROUND

Check to make sure that the ARCserve agent is compatible with the Exchange Server versions whose databases you plan to register as storages.

261531

Your attempt to register a new storage may fail when you use the Exchange Emulation feature to register an Exchange Server database held on a backup server running Symantec NetBackup version 7.5.0.5. This issue only occurs when the Recovery Manager for Exchange computer does not have a disk volume whose letter is identical to the one on which the database being registered resided on Exchange Server. This issue is caused by a problem known to exist in Symantec NetBackup 7.5.0.5 and described in Article TECH196858 available on the www.symantec.com Web site. For a complete description of the problem, follow this link: www.symantec.com/docs/TECH196858.

WORKAROUND 1

  1. Make sure the Recovery Manager for Exchange computer has a disk volume whose letter is identical to the one on which the database you want to register resided on Exchange Server.
  2. Retry the storage registration operation.

WORKAROUND 2

  1. Downgrade Symantec NetBackup from version 7.5.0.5 to 7.5.0.4.
  2. Retry the storage registration operation.
281761

Unexpected behavior: The Rme.exe process may keep running when you close the Recovery Manager Console after working with vRanger.

WORKAROUND

Use the Task Manager to stop the Rme.exe process manually.

283983

Unexpected result when you use Exchange emulation to simultaneously extract and register two Exchange Server databases from a backup created with Symantec NetBackup: Only one database is extracted.

WORKAROUND

Extract and register only one Exchange Server database at a time.

289758
Cannot restore a message from Archive Manager if the message encoding is not specified in a standard way, e.g. UTF8 instead of UTF-8. RMEX-276
While exporting items from Archive Manager, only "sent" or "received" date criteria can be used for filtering operation. If any other type of dates is used for filtering (e.g. "created", "modified" or "deleted"), items are not filtered at all. RMEX-420

System Requirements

Before installing Recovery Manager for Exchange 5.8.6, ensure that your system meets the following minimum hardware and software requirements.

Core Components (required)

Table 7: Core Components system requirements

Requirement Details
Processor

1.4 GHz or faster Pentium or equivalent, x86 or x64 architecture.

Overall memory (RAM) 512 MB or more.
Hard disk space

x86 system

Full product installation, including the prerequisite software: 1.5 GB of free disk space

Product installation when all the prerequisite software is already installed: 75 MB of free disk space

x64 system

Full product installation, including the prerequisite software: 1.5 GB of free disk space

Product installation when all the prerequisite software is already installed: 110 MB of free disk space

Operating system

Your computer must run one of the following operating systems (32-bit or 64-bit edition):

  • Microsoft Windows Server 2019
  • Microsoft Windows Server 2016
  • Microsoft Windows 10 without Service Pack
  • Microsoft Windows 8.1 without Service Pack
  • Microsoft Windows 8 without Service Pack
  • Microsoft Windows Server 2012 R2 without Service Pack
  • Microsoft Windows Server 2012 without Service Pack
  • Microsoft Windows 7 without Service Pack or with Service Pack 1
  • Microsoft Windows Server 2008 R2 without Service Pack or with Service Pack 1
  • Microsoft Windows Server 2008 with Service Pack 1 or Service Pack 2
  • Microsoft Windows Vista with Service Pack 2

NOTE: Recovery Manager for Exchange does not support Terminal Services Application mode.

Screen resolution 1024 x 768 or higher
Microsoft .NET Framework
  • Microsoft .NET Framework 4.0
  • Microsoft .NET Framework 2.0
Microsoft SQL Server

One of the following versions is required:

  • Microsoft SQL Server 2019 (Enterprise, Standard, Workgroup, Express, Web, or Developer Edition)
  • Microsoft SQL Server 2017 (Enterprise, Standard, Workgroup, Express, Web, or Developer Edition)
  • Microsoft SQL Server 2016 (Enterprise, Standard, Workgroup, Express, Web, or Developer Edition)
  • Microsoft SQL Server 2014 (Enterprise, Standard, Workgroup, Express, Web, or Developer Edition)
  • Microsoft SQL Server 2012, with or without any Service Pack (Enterprise, Standard, Workgroup, Express, Web, or Developer Edition)
  • Microsoft SQL Server 2008 R2, with or without any Service Pack (Enterprise, Standard, Workgroup, Express, Web, or Developer Edition)
  • Microsoft SQL Server 2008, with or without any Service Pack (Enterprise, Standard, Workgroup, Express, Web, or Developer Edition)
  • Microsoft SQL Server 2005, with or without any Service Pack (Enterprise, Standard, Workgroup, Express, Web, or Developer Edition)
Microsoft Windows PowerShell Microsoft Windows PowerShell 2.0
Microsoft Windows Installer Microsoft Windows Installer 4.5
Microsoft Outlook

Your computer must have one of the following versions installed:

  • Microsoft Outlook 2016 (standalone installation)
  • Microsoft Outlook 2013
  • Microsoft Outlook 2010
  • Microsoft Outlook 2007 SP2 or later
Microsoft Exchange Server

Supported versions of Microsoft Exchange Server:

  • Microsoft Exchange Server 2019 CU 2, CU3, CU4, CU5, CU6
  • Microsoft Exchange Server 2016 CU5, CU12, CU13, CU14, CU15, CU16, CU17
  • Microsoft Exchange Server 2016 without service pack
  • Microsoft Exchange Server 2013 CU22, CU23
  • Microsoft Exchange Server 2013 without Service Pack or with Service Pack 1 (offline Exchange Server 2013 databases are only supported when Recovery Manager for Exchange is installed on a computer running Windows Vista with Service Pack 2 or a later version of Windows)
  • Microsoft Exchange Server 2010 Update Rollup 27
  • Microsoft Exchange Server 2010 without Service Pack or with SP1, SP2, or SP3
  • Microsoft Exchange Server 2007 without SP or with SP1, SP2, or SP3

NOTE:

  • Recovery Manager for Exchange does not support Exchange Cached Mode. Before you start working with an online Exchange Server (for example, before registering Exchange mailboxes as storages), make sure that Exchange Server allows connections in non-Cached Exchange Mode.
  • To work with Exchange Server databases, Recovery Manager for Exchange requires several .dll files supplied with Microsoft Exchange Server. For detailed information about these files, see the Recovery Manager for Exchange User Guide.
  • To link Recovery Manager for Exchange to the required .dll files originating from Exchange Server 2013, 2010, 2007 or 2016 you must install Recovery Manager for Exchange on a computer running a 64- bit edition of Windows.
IBM Lotus Notes

In order to view, search, and restore Lotus Domino data with Recovery Manager for Exchange, your computer must have one of the following IBM Lotus Notes versions installed:

9.0, 8.5, 8.0, or 7.0

IBM Lotus Domino

Recovery Manager for Exchange supports the following versions of IBM Lotus Domino:

9.0, 8.5, 8.0, 7.0, 6.5, 6.0, 5.0, and 4.6

Quest® Archive Manager® Recovery Manager for Exchange supports the following versions of Archive Manager as source and target storages: 5.4, 5.5, 5.6,5.3, 5.2 and 5.0.
Quest® Recovery Manager for Active Directory®

Recovery Manager for Exchange can integrate with the following versions of Recovery Manager for Active Directory to restore mailbox user accounts from Active Directory backups:

8.8.1, 8.8, 8.7.1, 8.7, 8.6.4, 8.6.3, 8.6.1, 8.6

Recovery Manager for Exchange and Recovery Manager for Active Directory must be installed on the same computer.

Management Shell (optional)

Table 8: Management Shell system requirements

Requirement

Details
Recovery Manager for Exchange components Core Components

Web Interface (optional)

Table 9: Web Interface system requirements

Requirement

Details
Microsoft Internet Information Server (IIS)

Microsoft Internet Information Services (IIS) 6.0, 7.0, 7.5, 8.0, or 8.5 must be installed on the Recovery Manager for Exchange computer.

Microsoft Silverlight

Microsoft Silverlight 5 must be installed on the computer from which you want to access the Web Interface.

If Silverlight is not installed, you will be prompted to install it when accessing the Web Interface for the first time.

Web Browser

You can access the Web Interface by using Microsoft Internet Explorer 7.0 or later.

 

Support HTTPS web access

Recovery Manager for Exchange components Core Components

Upgrade and compatibility

Recovery Manager for Exchange 5.8.6 is upgradeable from version 5.6 or later.

Recovery Manager for Exchange can integrate with the below-listed backup software to extract and register Exchange Server databases from streaming (normal, incremental, and differential) backups created with these products. The next table also describes the conditions where Recovery Manager for Exchange can extract and register Exchange Server databases from VSS (Volume Shadow Copy Snapshot) backups created with particular backup software.

Table 10: Supported backup software

Backup software Version VSS backups

Quest® Rapid Recovery®
(legacy name: AppAssure®)

5.3, 5.4, 6.0, 6.1.3, 6.2, 6.2.1, 6.3, 6.4

 Not applicable
Quest® NetVault® 8.6, 9.0, 9.1, 9.2, 10, 11, 11.1, 11.4, 11.4.5, 12, 12.0.1, 12.1, 12.2, 12.3, 12.4

VSS backups are supported via Exchange emulation if these conditions are true:

  • Backed Exchange is Exchange Server 2007, Exchange Server 2010 or Exchange Server 2013.
  • Recovery Manager for Exchange computer is running the same or a later version of Windows as the backed up Exchange Server.
Quest® vRanger® (Standard and Pro) 5.3, 5.4, 5.5, 6.0, 6.1, 7.0, 7.1, 7.2, 7.3, 7.5, 7.5.1, 7.6.3, 7.6.5, 7.6.6, 7.7 Not applicable

CA BrightStor ARCserve

(also known as CA ARCServeIT for Windows NT and CA BrightStor Enterprise Backup)

 2000 (7.0), 9.0, 10.5, 11.0, 11.1, 11.1 SP1, 11.5, 11.5 SP1, 11.5 SP3, 11.5 SP4, 12.0, 12.0 SP1, 12.0 SP2, 12.5, 12.5 SP1, 15.0, 16.0, 16.0 SP1, 16.5

VSS backups are supported via Exchange emulation if these conditions are true:

  • Created with ARCserve Backup 11.5 SP4, 12.0, 12.0 SP1, 12.0 SP2, 12.5, 12.5 SP1, 15.0, 16.0, 16.0 SP1, or 16.5.
  • Recovery Manager for Exchange computer is running the same or a later version of Windows as the backed up Exchange Server.
HP Data Protector 5.1, 5.5, 6.0, 6.1, 6.2, 7.0, 8.0, 8.1, 9.0

VSS backups are supported via Exchange emulation if these conditions are true:

  • Created with HP Data Protector 7.0, 8.0, 8.1 or 9.0.
  • Recovery Manager for Exchange computer is running the same version of Windows as the backed up Exchange Server
IBM Tivoli Storage Manager 5.1.1, 5.1.5, 5.2, 5.3, 5.4, 5.5, 6.1, 6.2, 6.3, 6.4, 7.1, 7.1.4

VSS backups are supported via Exchange Emulation if these conditions are true:

  • Created with Tivoli Storage Manager 6.2, 6.3, 6.4, 7.1 or 7.1.4
  • Backed up Exchange Server version is Exchange Server 2007, Exchange Server 2010, or Exchange Server 2013.
  • Recovery Manager for Exchange computer is running the same or a later version of Windows as the backed up Exchange Server.
EMC NetWorker 6.0, 6.1, 6.2, 7.0, 7.1, 7.2, 7.3, 7.4, 7.5, 7.6, 8.0, 8.1, 8.2, 9.0, 9.1.1, 9.2.1

VSS backups are supported via Exchange emulation if these conditions are true:

  • Backed up Exchange Server version is Exchange Server 2007, Exchange Server 2010, or Exchange Server 2013.
  • Recovery Manager for Exchange computer is running the same or a later version of Windows as the backed up Exchange Server.
Microsoft Windows Server Backup Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2016 VSS backups are supported via access to backup server.
Microsoft System Center Data Protection Manager 2007, 2007 with Feature Pack, 2007 SP1, 2010, 2012, 2012 SP1, 2012 R2 VSS backups are supported via access to backup server.
Symantec Backup Exec for Windows Servers

8.6, 8.6 SBS, 8.6 for WSA, 9.0, 9.1, 10.0, 10d (10.1), 11d, 12.0, 12.5, 2010 (13), 2010 SP1, 2010 R2, 2010 R2 SP1, 2010 R3, 2010 R3 SP1, 2010 R3 SP3, 2012, 2012 SP1, 2012 SP2, 2012 SP3, 2012 SP4, 2014

NOTE: Granular Restore Technology (GRT) backups are not supported.

VSS backups are supported via direct access if created with Backup Exec 11d, 12.0, 12.5, 2010 (13), 2010 SP1, 2010 R2, 2010 R2 SP1, 2010 R3, 2010 R3 SP1, 2010 R3

  • VSS backups are supported via Exchange emulation if these conditions are true: Created with Backup Exec 11d, 12.0, 12.5, 2010 (13), 2010 SP1, 2010 R2, 2010 R2 SP1, 2010 R3, 2010 R3 SP1, 2010 R3 SP3, 2012, 2012 SP1, or 2012 SP2
  • Backed up Exchange Server version is Exchange Server 2007, Exchange Server 2010 or Exchange Server 2013.
  • Recovery Manager for Exchange computer is running the same version of Windows as the backed up Exchange Server.

NOTE: Recovery Manager for Exchange can register offline Exchange Server databases extracted from a snapshot backup with Backup Exec. For instructions, see the Recovery Manager for Exchange User Guide.

Symantec NetBackup NetBackup DataCenter 4.0 V, 4.5, 4.5 FP3, 4.5 FP4, 4.5 FP5, 4.5 FP6, 4.5 FP7, 4.5 FP8, 4.5 FP9, 4.5 MP1, 4.5 MP2, 4.5 MP3, 4.5 MP4, 4.5 MP5, 4.5 MP6, 4.5 MP7, 4.5 MP8, 4.5 MP9 VSS backups are not supported.
NetBackup BusinesServer 4.5, 4.5 FP3, 4.5 FP4, 4.5 FP5, 4.5 FP6, 4.5 FP7, 4.5 FP8, 4.5 FP9, 4.5 MP1, 4.5 MP2, 4.5 MP3, 4.5 MP4, 4.5 MP5, 4.5 MP6, 4.5 MP7, 4.5 MP8, 4.5 MP9 VSS backups are not supported.
NetBackup Server or NetBackup Enterprise Server 5.0, 5.0 MP1, 5.0 MP2, 5.0 MP3, 5.0 MP4, 5.0 MP5, 5.0 MP6, 5.0 MP7, 5.1, 5.1 MP1, 5.1 MP2, 5.1 MP3, 5.1 MP4, 5.1 MP5, 5.1 MP6, 6.0, 6.0 MP1, 6.0 MP2, 6.0 MP3, 6.0 MP4, 6.0 MP5, 6.0 MP6, 6.0 MP7, 6.5.0, 6.5.1, 6.5.2, 6.5.3, 6.5.4, 6.5.5, 6.5.6, 7.0.0, 7.0.1, 7.1.0, 7.5.0, 7.6.0, 7.7.0, 8.0

VSS backups are supported via direct access if created with NetBackup 6.0 (with or without MP), 6.5.x, 7.0.0, 7.0.1, 7.1.0, 7.5.0, 7.6.0 or 7.7.0.

VSS backups are supported via Exchange emulation if these conditions are true:

  • Created with NetBackup 6.5.2, 6.5.3, 6.5.4, 6.5.5, 6.5.6, 7.0.0, 7.0.1, 7.1.0, 7.5.0, 7.6.0 or 7.7.0 or 8.0
  • Backed up Exchange Server version is Exchange Server 2007, Exchange Server 2010, or Exchange Server 2013
  • Symantec NetBackup 8.0 supports Exchange Server 2016
  • Recovery Manager for Exchange computer is running the same version of Windows as the backed up Exchange Server.
自助服务工具
知识库
通知和警报
产品支持
下载软件
技术说明文件
用户论坛
视频教程
RSS订阅源
联系我们
获得许可 帮助
技术支持
查看全部
相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级