立即与支持人员聊天
与支持团队交流

DR Series Software 4.0.4 - Command Line Reference Guide

Introduction to the DR Series System Command Line Reference Guide Introducing the DR Series system Managing the DR Series system
Alerts Commands Authenticate Commands Network
Network Command Usage network --show network --delete network --restart network --setdhcp network --setstatic_ip [--bondif <bondN>] [--nwif <ethN>] --ip <IPv4/IPv6 address not already in use> --netmask <netmask> [--gateway <IPv4/IPv6 address>] network --create_bond network --create_eth network --add_member network --setdns [--suffix <dns suffix>] [--primary <IPv4/IPv6 address>] [--secondary <IPv4/IPv6 address>] network --setbonding --bondif <bondN> [--mode <ALB | 802.3ad>] [--mtu <supported MTU range 512 - 9000>] network --update network --factory_reset network --host network --route network --nslookup --destination <ip address | hostname> network --traceroute --destination <ip address | hostname> network --ping --destination <ip address | hostname> [--tries <number>] [--size <number>] [--interface <bondN | ethN>] network --blink network --enable network --disable=GUID-925B2D94-D583-4966-ABDE-8E3FE14B59FC=1=en-us= network --troubleshoot [--links] [--gateway] [--ntp] [--dns] [--active_domain] [--nis] [--clients] [--port_mapper] [--network_config] [--show_active <NFS|CIFS|OST|RDS|NDMP|ISCSI|FC>] [--interface <bondN | ethN>] network --troubleshoot --gateway --interface <bondN | ethN> network --troubleshoot [--show_active <NFS| CIFS|OST|NDMP|ISCSI|RDS>] network --tcpdump [--port <nfs | windows | replication | ost | rds>] [--pkt_size <128 - 32768>] [--file_size <0 - 100>] [--stop] [--host <ip address list>] [--interface <bondN | ethN>] network --tcpdump [--pkt_size <128 - 32768>] network --tcpdump [--file_size <0 - 100>] network --tcpdump [--host <ip address list>] network --tcpdump [--port <nfs | windows | replication | ost | rds>] network --iperf_client --server <ip address | hostname> [--port <number>] [--window_size <num bytes [KB/MB]>] [--interval <num seconds>] [--time <num seconds>] network --iperf_server [--port <number>] [--window_size <num bytes [KB/MB>] network --help
OST RDA Stats Storage Group commands System
System Command Usage system --show [--config] system --show [--hardware] system --show [--storage] [--type <boot | internal | external>] [--service_tag <service tag>] system --show [--storage] system --show [--license] [--verbose] system --show [--ntp] system --show [--version] system --show [--timezones [Region]] system --show [--upgradefile] system --show [--upgradehistory] system --show [--marker] system --show [--replication_traffic] system --show [--opdup_traffic] system --show [--backup_traffic] system --show [--mgmt_traffic] system --init system --init --secure_erase <1–pass/3-passes/7-passes> system --reboot system --shutdown system --upgrade system --license [--validate] [--add] system --setname --name <node_name> system --setdate [--date <date>] [--timezone <Region/Zone>] system --setntp [--add <server name>] system --setntp [--delete <server name>] system --setntp [--enable] system --setntp [--disable] system --setntp [--adjust_time] system --hybrid_replication [--enable][--disable][--status] system --rdairgap [--enable][--disable][--set_retention_period <0 days to 365 days>][--get_retention_period][--open][--close][--status] system --rdairgap_schedule [--start_time <HH:MM>][--end_time <HH:MM>][--remove] system --setlogin system --telnet [--enable | --disable] system --datacheck --enable system --datacheck --disable system --datacheck --throttle system --marker [--enable] [--disable] system --verify_on_read [--enable] [--disable] system --add_storage --enclosure <service tag> system --storage [--set_usage_alert <70% - 90%>] system --storage [--blink] [--type <internal | external>] [--service_tag <service tag>] [--disk <slot num>] system --storage [--unblink] [--type <internal | external>] [--service_tag <service tag>] [--disk <slot num> system --mgmt_traffic system --backup_traffic system --replication_traffic system --opdup_traffic system --help
User Virtual Machine
Maintaining the DR Series System
Diagnostics Maintenance
Maintenance Command Usage maintenance --filesystem [--start_scan [verify_data | verify_rda_metadata | verify_metadata] [--storage_group <name>] maintenance --filesystem [--stop_scan] maintenance --filesystem [--scan_status] maintenance --filesystem [--scan_report [verbose]] maintenance --filesystem [--repair_status [verbose]] maintenance --filesystem [--repair_history [verbose]] maintenance --filesystem [--scan_restart [verify_data | verify_rda_metadata | verify_metadata]] maintenance --filesystem [--repair_now] maintenance --filesystem [--reclaim_space] maintenance --filesystem [--clear_quarantine] maintenance --filesystem [--clear_quarantine] maintenance --filesystem --show_throughput maintenance --configuration [--backup] maintenance --configuration [--restore] maintenance --configuration [--reinit_dictionary] maintenance --configuration [--reset_web_certificate] maintenance --configuration --enable_sha256_web_certificate maintenance --hardware [--reinit_nvram] maintenance --hardware [--restore_hw_db] maintenance --hardware [--motherboard_replaced] maintenance --disk [--make_standby [slot num]] [--type <internal | external-<num> | service tag>] --clear_foreign] maintenance --remote_access [--show] maintenance --remote_access [--enable] maintenance --remote_access [--racreset] maintenance --remote_access [--static_ip] [--ip <IPv4/IPv6 address>] [--netmask <netmask>] [--gateway <IPv4/IPv6 address>] [--device <lom1|lom2|lom3|lom4>] maintenance --remote access [--disable] maintenance --vdisk --check_consistency --type <boot|internal|external> [--service_tag <service tag>] maintenance --help
Managing DR Series System Storage Operations
System Storage Operation Commands Connection Container VTL NDMP iSCSI FC Replication Seed Schedule
Data Integrity Checking Additional Linux Commands About us

system --replication_traffic

Description

The command sets the default network interface for replicating 'source' data.

Syntax

system --replication_traffic [--add] [--interface <bondN|ethN|lo>]
                 [--update] [--interface <bondN|ethN|lo>]
                 [--delete]


        --add         Add default replication network configuration.
        --update      Update default replication network configuration.
        --delete      Delete default replication network configuration.
        --interface   Interface to use for replicating 'source' data.

For example, to add the replication, run the command, system --replication_traffic --add --interface bond0

Result

Successfully added application replication.

system --opdup_traffic

Description

The command sets the default network interfaces for optimized copy data transfer.

Syntax

system --opdup_traffic [--add] [--incoming_interface <bondN|ethN|lo>] [--outgoing_interface <bondN|ethN|lo>]
                 [--update] [--incoming_interface <bondN|ethN|lo>] [--outgoing_interface <bondN|ethN|lo>]
                 [--delete]


        --add                  Add default optimized copy configuration.
        --update               Update default optimized copy configuration.
        --delete               Delete default optimized copy configuration.
        --incoming_interface   Interface to use for receiving optimized copy data.
        --outgoing_interface   Interface to use for sending optimized copy data.
For example, to add the default network interface for incoming traffic, run the command: system --opdup_traffic --add --incoming_interface bond0

Result

Successfully added application opdup_incoming.

system --help

Description

Displays the list of all system-related options that can be used as a reference when using the DR Series system CLI.

Syntax

system --help

Result

Usage:
        system --show [--config]
                 [--hardware]
                 [--storage] [--type <boot|internal|external>] [--service_tag <service tag>]
                 [--license] [--verbose]
                 [--ntp]
                 [--version]
                 [--timezones [Region]]
                 [--upgradefile]
                 [--upgradehistory]
                 [--marker]
						  [--verify_on_read]
                 [--replication_traffic]
                 [--opdup_traffic]
                 [--backup_traffic]
                 [--mgmt_traffic]

        system --reboot
        system --shutdown
        system --upgrade
        system --license [--add]

        system --setname --name <node_name>

        system --setdate [--date <date>]
                 [--timezone <Region/Zone>]

        system --setntp [--add <server name>]
                 [--delete <server name>]
                 [--enable]
                 [--disable]
                 [--adjust_time]

								system --hybrid_replication [--enable]
																	[--disable]
																	[--status]

								system --rdairgap [--enable]
																	[--disable]
																	[--set_retention_period <0 days to 365 days>]
																	[--get_retention_period]
																	[--open]
																	[--close]
																	[--status]

								system --rdairgap_schedule [--start_time <HH:MM>]
																	[--end_time <HH:MM>]
																	[--remove]

        system --setlogin
        system --telnet [--enable | --disable]

        system --datacheck [--enable <all|namespace|blockmap>]
                 [--disable <all|namespace|blockmap>]
                 [--throttle <1-100>]

        system --marker [--enable]
                 [--disable]

								system --verify_on_read [--enable]  
                 [--disable] 

        system --add_storage --enclosure <service tag>

        system --storage [--blink] [--type <internal|external>] [--service_tag <service tag>] [--disk <slot num>]
                 [--unblink] [--type <internal|external>] [--service_tag <service tag>] [--disk <slot num>]

        system --mgmt_traffic [--add] [--type <Webserver|Telnet>] [--interface <bondN|ethN|lo>]
                 [--update] [--type <Webserver|Telnet>] [--interface <bondN|ethN|lo>]
                 [--delete] [--type <Webserver|Telnet>]

        system --backup_traffic [--add] [--type <NFS|CIFS|OST|RDS|NDMP|ISCSI|FC>] [--interface <bond(0-N)|eth(0-N)|lo>]
                 [--update] [--type <NFS|CIFS|OST|RDS|NDMP|ISCSI|FC>] [--interface <bond(0-N)|eth(0-N)|lo>]
                 [--delete] [--type <NFS|CIFS|OST|RDS|NDMP|ISCSI|FC>]

        system --replication_traffic [--add] [--interface <bondN|ethN|lo>]
                 [--update] [--interface <bondN|ethN|lo>]
                 [--delete]

        system --opdup_traffic [--add] [--incoming_interface <bondN|ethN|lo>] [--outgoing_interface <bondN|ethN|lo>]
                 [--update] [--incoming_interface <bondN|ethN|lo>] [--outgoing_interface <bondN|ethN|lo>]
                 [--delete]

        system --help

   system <command> <command-arguments>
   <command> can be one of:
                --show                  Displays command specific information.
                --reboot                Reboots the machine.
                --shutdown              Shuts down the machine.
                --upgrade               Upgrades the software on the machine.
                --license               Installs the license on the machine.
                --setname               Sets the name of the machine.
                --setdate               Sets the date and time zone for the machine.
                --setntp                Uses network time protocol (NTP) source to update time.
																--hybrid_replication				Enables or disables hybrid replication support.
																--rdairgap														Enables or disables airgap support.
																--rdairgap_schedule					Airgap close mode schedule management.
                --setlogin              Updates the login password.
                --telnet                Enables or disables telnet access.
                --datacheck             Enables or disables online data verification features.
                --marker                Enables or disables markers.
															 --verify_on_read								Enables or disables data verification on read
                --add_storage           Adds an expansion shelf.
                --storage               Locates a disk or expansion shelf.
                --mgmt_traffic          Configure Webserver or Telnet to use a specific network interface.
                --backup_traffic        Specify network interfaces to use for backup network traffic.
                --replication_traffic   Set default network interface for replicating 'source' data.
                --opdup_traffic         Set default network interfaces for optimized copy data transfer.

For command-specific help, please type system --help <command>
        eg:
            system --help show


User

This topic introduces the DR Series system CLI commands that allow you to manage user accounts by enabling or disabling user accounts, adding and updating users, setting passwords, deleting users, and displaying the list of current active user accounts logged in to a DR Series system.

相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级