立即与支持人员聊天
与支持团队交流

Foglight Evolve 9.3 - Installing Foglight on Windows with an External Oracle Database

Before Installing Foglight Installing Foglight
Preparing to install Installing a new version of the Management Server Installed directories Foglight settings HP patch checking tool Uninstalling Foglight Upgrading the Management Server Installing Foglight FAQ
Running the Management Server Installing and Upgrading Cartridges Installing Agents

Setting up an encrypted database connection

The following procedure outlines how to set up a secure external Oracle® database connection.

 
* 
NOTE: This procedure must be performed after installation but before you start the Management Server.
To set up an encrypted Oracle® database connection:
1
Enable encryption in your Oracle database. Check with your database administrator for details.
2
Uncomment and set the server.database.secureconn attribute in the server.config file to true, as shown below.
server.database.secureconn = "true";
3
Start the Management Server.

Setting up an encrypted LDAP connection with SSL

Use the following instructions if you need to encrypt communication between the Management Server and the LDAP server.

To encrypt communication between Management Server and LDAP:
1
Acquire the LDAP server certificate in .pem format from the administrator.
2
Import the certificate into the Management Server keystore, see Importing self-signed certificates to Foglight TrustStore .
* 
NOTE: In addition to the Root CA certificate, there may be one or more intermediate CA certificates. If so, make sure to import the Root CA certificate and all intermediate CA certificates in sequence.
3
On the navigation panel, under Dashboards, click Administration > Users & Security > Directory Services Settings.
4
Under LDAP Locations, click Edit.
5
Specify the LDAP server URL in the following format:
ldaps://ldap_server_host_name:636
 
* 
NOTE: The port number for LDAP over SSL is usually 636. Confirm the exact port number with your LDAP server administrator.
6
Restart the Management Server.

Using encryption when sending email from Foglight

You can use encryption when sending email from Foglight. To do so, you must enable Foglight to use the SSL protocol and configure the mail server used by Foglight to use an SSL certificate that is not self-signed.

You can configure Foglight to use the SSL protocol either on the Email Configuration Dashboard or by editing the related mail.use.ssl registry variable. See the Administration and Configuration Help for more information.

See the documentation for your mail server for information about configuring it to use an SSL certificate.

Configuring ports

You can set a number of different ports using the file <foglight_home>\config\server.config, including mandatory ports required for Foglight to run.

For a list of these ports, their default values, and the configuration parameters you can use to set them in server.config, see the Administration and Configuration Help.

 
* 
NOTE: In certain configurations the Management Server may use ports in addition to the ones that you set using server.config; for example, when Foglight is running in High Availability (HA) mode. See the Administration and Configuration Guide for details.
相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级