立即与支持人员聊天
与支持团队交流

Foglight for Storage Management Shared 4.8.5 - User and Reference Guide

Getting Started Configuring Agents to Monitor Storage Devices
Brocade SAN Switches Cisco SAN Switches Dell Compellent Arrays Dell EqualLogic PS Series Array Groups EMC CLARiiON CX Series Arrays (CLI) EMC CLARiiON, VNX, or VMAX Storage Arrays (SMI-S) EMC Isilon EMC VPLEX Hitachi Data Systems AMS, USP, and VSP HP EVA Storage Arrays HP 3PAR Arrays NetApp Filers Configuration Procedures
Managing Agents Using Foglight for Storage Management Monitoring Storage Performance Investigating Storage Devices Investigating Storage Components Investigating VPLEX Storage Troubleshooting Storage Performance Managing Data Collection, Rules, and Alarms Understanding Metrics Appendix: Collection Target Support Matrix Online-Only Topics

Installed Dashboards and Cartridges

Foglight for Storage Management adds a set of storage-specific dashboards to the core Foglight for Storage Management components.

Dashboards

Storage-specific dashboards are located under Storage & SAN in the navigation panel:

•
Storage Capacity — Monitor your storage capacity by device type.
•
Storage Environment — Configure the monitored storage environment, monitor and investigate storage devices, and maintain the solution.
•
Storage Explorer — Investigate issues in storage performance.
•
Storage Troubleshooting — Determine if a poorly-performing virtual machine is experiencing storage issues.

Storage information can also be found in the following menus/dashboards:

•
VMware or Hyper-V Explorer — Review the entities that make up the virtual environment, from vCenters to datastores or servers. The VMware Explorer and Hyper-V Explorer ships with Foglight Evolve. When adding Foglight for Storage Management dashboard, you gain the ability to view connectivity diagrams that link datastores to the SAN environment in the following tabs:
•
SAN Topology tab — View a diagram showing how the selected entity connects to the storage environment. Click an icon or name to drill down the component dashboard. This tab is available on the following dashboards: Cluster, Datastore, ESX Host, Hyper-V server, and Virtual Machine.
•
SAN Data Path tab — View a table and a diagram containing performance metrics for the ports providing I/O to and from storage devices and their components. Click an icon or name to drill down the component dashboard. This tab is available on the following dashboards: ESX Host, Hyper-V server, and Virtual Machine.
•
Infrastructure — Review the physical hosts that underlie the virtual environment. The Infrastructure Environment dashboard ships with Foglight Evolve. When adding Foglight for Storage Management dashboard, you gain the ability to infer the name of physical hosts that are connected to storage devices without having to create Infrastructure agents to monitor physical hosts directly. These hosts are referred to as Inferred Hosts.

Cartridges

The storage-specific functionality is packaged in one car containing the following cartridges:

•
Storage
•
Storage Collector
•
Storage-Intelliprofile
•
StorageUI

To view the status of installed cartridges, on the navigation panel, under Dashboards, click Administration >

Cartridges > Cartridge Inventory. Scroll down to find the cartridges.

Configuring Agent Managers for Storage Collection

If you are installing external Agent Managers, install them now and then return to this workflow to configure some settings for storage collection.

This section covers the following topics:

•
Installing External Agent Managers
•
Optional — Creating a Lockbox for Foglight for Storage Management Credentials
相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级