Monitoring SQL Server instances and databases provide information necessary to diagnose and troubleshoot SQL Server performance issues, as well as to fine-tune SQL Server. Optimal performance is not easy to define and set, as there is usually a trade-off between multiple software and hardware factors. It also depends on your environment, business requirements, and company policy.
While slow reporting may be acceptable in a small factory, it is not in large enterprises where slowdowns, hiccups, and bottlenecks affect a large number of users and can significantly affect business. The listed issues are usually unacceptable and must be fixed as soon as possible.
Once SQL Server performance is tuned, it has to be monitored continuously, as daily data, schema, and configuration changes often lead to a situation where additional, manual tuning is needed. The most common example is obsolete statistics – a query runs well and then, without any apparent reasons, becomes very slow.
To have a fine-tuned SQL Server instance that performs optimally, a DBA must be proactive and to monitor system performance regularly, define normal trends and set baselines for specific SQL Server performance metrics, be notified about metrics that are out of the ordinary value range, and take adequate actions.
The set of metrics that should be monitored depends on your performance goals. However, there is a range of commonly monitored metrics that provide the information sufficient for basic troubleshooting. Based on their values, additional, more specific metrics could be monitored to find the root cause of the problem.
These commonly monitored SQL Server performance metrics are memory and processor usage, network traffic, and disk activity.
Besides monitoring SQL Server parameters, it’s recommended to monitor parameters for the specific database, as well as Windows system parameters.
The commonly monitored metrics are processor time, processor queue length, page reads and writes per second, page life expectancy, target, and total server memory, buffer cache hit ratio, batch requests, processor utilization, lazy writes, network usage, paging, user connections, etc.
SQL Server provides two built-in monitoring features: Activity Monitor and Data Collector.
Activity Monitor tracks only the most important SQL Server performance metrics. To obtain them, it executes queries against its host SQL Server instance every 10 seconds. The performance is monitored only while Activity Monitor is running, which makes it a lightweight solution with almost no overhead.
The metrics are shown in 5 collapsible panes: Overview, Processes, Resource Waits, Data File I/O, and Recent Expensive Queries.
The Overview pane shows the processor time percentage, a number of waiting tasks, database I/O operations in MB/sec, and the number of batch requests.
The Processes pane shows currently running SQL Server processes for each database on the instance. The information shown is: login, application, and host used, tasks state and command, wait time, etc. The information in the table can be filtered by the specific column value.
The Process pane context menu provides a feature useful for more in-depth analysis and troubleshooting. That’s tracing the selected process in SQL Server Profiler.
The Resource Waits pane shows waits for different resources: memory, compilation, network, etc.
It shows the wait time (the time SQL Server tasks are waiting on system resources), recent wait time, cumulative wait time, and average waiter counter.
The Data File I/O pane shows a list of all database files: MDF, NDF, and LDF, their names and paths, recent read and write activity, and response time.
The Recent Expensive Queries pane shows the queries executed in the last 30 seconds that used most of the hardware resources: processor, memory, disk, and network. The context menu enables opening the query in a SQL Server Management Studio query tab and opening its execution plan.
Activity Monitor can be opened via the SQL Server Management Studio toolbar's Activity Monitor icon, keyboard Ctrl+Alt+A shortcut, or the SQL Server instance context menu in Object Explorer.
As shown, Activity Monitor tracks only a pre-defined set of the most important SQL Server performance metrics. Additional metrics cannot be monitored; the monitored ones cannot be removed. Only real-time monitoring is possible. There’s no built-in option to save metrics history for later use. Therefore, Activity Monitor is useful for current monitoring and basic troubleshooting; for any more profound analysis and performance tuning, a monitoring tool where monitored metrics can be selected, threshold values defined, and historical data stored is necessary.
Data Collector is another SQL Server Management Studio built-in performance monitoring and tuning feature. It collects performance metrics from SQL Server instances, saves it in a local repository, so they can be used for later analysis. It uses Data Warehousing, SQL Server Agent, and Integration Services.
Unlike Activity Monitor, Data Collector allows you to specify the metrics you will monitor. It offers three built-in monitor metrics sets (data collectors) with the most important and commonly monitored performance metrics. To monitor additional performance metrics, custom data collectors can be created via T-SQL code or API.
Make sure that SQL Server Integration Services is installed, and SQL Server Agent, Management Data Warehouse, and Data Collection are enabled.
Expand Management in SQL Server Management Studio Object Explorer
In Data Collection context menu select Configure Management Data Warehouse
Select Set up data collection
Select the SQL Server instance name and the database that will host the management data warehouse and the local folder where the collected data will be cached
Click Next, review the settings and click Finish
Data Collection provides three pre-defined sets, available in the System Data Collection Sets folder in the Object Explorer Management | Data Collection node: Disk Usage, Query Statistics, and Server Activity. Each has its built-in report.
The Disk Usage data collection set collects data for the database data files (MDF and NDF), transaction log file (LDF), and I/O statistics.
The Disk Usage built-in report is available in the Data Collection context menu. It shows disk space used by the database files, growth trends, and average day growth.
The Query Statistics data collection set collects query code, statistics, activity, and query execution plans for the 10 most expensive queries.
The Server Activity data collection set collects data about the processor, memory, disk I/O, and network used. The report shows CPU, memory, disk I/O, and network usage, SQL Server waits, SQL Server instance, and operating system activity.
As shown above, Data Collection has to be configured and started in order to capture data. It provides three built-in collection sets and adequate reports. There is no wizard for adding additional metrics; it has to be done through code.
One of the Data Collector advantages is that it doesn’t have to collect data all the time, but only in pre-defined schedules, and thus adds less overhead. A downside of the feature is that there’s no option to select the databases on the SQL Server instance that will be monitored, all databases will be monitored, which adds overhead, noise to the collected data, and requires more disk space.
The feature is not available in SQL Server versions earlier than 2008 and in editions other than Enterprise, Standard, Business Intelligence, and Web.
Unlike Activity Monitor, there is no option to watch real-time graphs, but captured data can be saved for a specified number of days. The feature provides basic performance metrics, but coding knowledge is required for monitoring any additional metrics.
ApexSQL Monitor is an agentless web-based SQL Server performance monitoring tool that monitors Windows OS, SQL Server, and database performance metrics, in real time through more than 30 counters in real time, including tracking of wait statistics at the cumulative and individual query level. It allows users to select the SQL Server instances and databases that will be monitored, to granularly select the metrics for each database, SQL Server instance, and machine, and to specify the metrics and alert threshold values and periods that if exceeded, the alerts will be raised. ApexSQL Monitor shows the performance metrics in real-time graphs, and stores the corresponding metrics data in a central repository database for later use.
The main dashboard page shows the necessary monitoring information about all currently monitored instances including alerts triggered for a specific category. The main dashboard also allows disabling or removing the monitored instance from the panel drop-down menu or from the Action column in the dashboard table view, as well as managing credentials used for monitoring specific instance.
Selecting the specific instance in the instance explorer or in the main dashboard opens the instance dashboard that displays essential information about the selected SQL Server instance such as host operating system and hardware but also the number of alerts per severity category for each of six performance groups.
The System performance page displays the important Windows metrics of the machine that hosts the selected SQL Server: pages input per second, processor queue length, free space, utilization of processor time, network utilization, paging file usage, pages per second, average bytes per read, average bytes per write, average disk queue length, current disk queue length, average read time, average write time, disk reads per second, disk writes per second, system availability and available memory in MB. Each chart can be enlarged by clicking on it. The default period displayed in charts is 30 minutes, and it can be changed to meet various preferences.
The SQL Server performance page shows metrics related to SQL Server instance performance: the number of batch requests, compilations per second, re-compilations per second, longest running transaction, full scans, index searches, forwarded records, free list stalls, lazy writes, lock requests, deadlocks per second, user connections, target and total server memory in KBs, memory grants pending, buffer cache hit ratio, page life expectancy, page reads/writes, and page splits per second.
The Database performance page displays the most important database information and configuration details and also database data, transaction log file size, and number of transactions per second.
By selecting the AlwaysOn availability group listener in the instance explorer, and then Dashboard from the main menu the AlwaysOn dashboard page will be displayed. The application can provide and resolve a complete WSFC and AlwaysOn structure of the monitored environment. This topography includes not just for the AlwaysOn listener added for monitoring, but only the replicas and WSFC that are part of the added AlwaysOn Availability Group will be monitored.
To track dedicated AlwaysOn Availability Group performance metrics in real time via a set of dedicated counters , but also by the ability to analyze historical data, ApexSQL Monitor AlwaysOn metrics page provides charts for all important AlwaysOn counters. Selecting the replica in the instance explorer and the AlwaysOn link in the SQL Server section of the instance dashboard will open the AlwaysOn metric charts page.
The Query waits page shows the top queries with the largest wait time during the selected time period, including the graphical presentation of the queries and their wait times. Queries with the highest wait times, accumulated during the chosen period, will be displayed in the chart in descending order from left to right. Also, single, grouped or blocked query details and query plans can be reviewed and analyzed.
The Query performance page displays the top slowest queries that used the most resource since the last SQL Server restart, including the graphical presentation of the slowest queries by average CPU time, average execution time, and averageI/O per second. The user can select the number of queries to be displayed.
Index monitoring is not enabled by default, so if needed, it must be enabled first in the configurations page. The Index page displays a table with a list of the indexes that meet the criteria specified in the index configuration page and basic info. For more details about each individual index, click on its name will open the details page for that index where Average fragmentation, Space usage, and Activity charts with appropriate metrics are displayed. Switching to details of another index is easy via the drop-down menu.
Start ApexSQL Monitor
Click Add server in the menu to add the SQL Server instance you want to monitor. All SQL Server instances added for monitoring are displayed in the instance explorer on the left
To configure the monitored performance metrics, click Metrics in the menu. The metrics monitored can be configured on the device, database, SQL Server instance, and machine level
In the same screen, you can configure alerts. To enable an alarm, select the Alerting checkbox and enter the threshold values, or use baseline threshold if baseline values are calculated
After you’ve set the alerts and metrics, click Apply at the top of the form
If there’s an alert, it will be indicated by an icon next to the SQL Server instance in the Servers list. To see the list of unresolved alerts, click Alerts in the main menu. In the Alerts page, the user can review alerts that have been raised on a specific set or all SQL Server instances depending on what is selected in the instance explorer By default, displayed alerts are grouped by date and by default alerts for last 24 hours.
When a particular metric is selected in the alerts list, an individual alert page will be opened with a chart of the affected metric along with the alert icon on the curve, placed at the exact moment when the alert was triggered.
ApexSQL Monitor is a monitoring solution easy to start and configure, and no coding knowledge is required. It provides granular monitoring, and unlike native SQL Server monitoring solutions, it enables selecting the metrics, as well as databases, devices and that will be monitored. Different metrics can be monitored for each device, database, SQL Server instance, and operating system. This reduces overhead added by the monitoring process.
Unlike Activity Monitor and Data Collector, ApexSQL Monitor stores historical data in a central repository, and displays the historical data in graphs. Alerts can be configured in a few clicks, with a specific threshold value entered for low, medium, and high severity alerts.
© ALL RIGHTS RESERVED. Feedback 使用条款 隐私 Cookie Preference Center