Displays any existing replication schedule for a DR Series system. If you do not specify a name parameter, the replication schedules for all containers are returned.
schedule --show --replication --name acme55-cont1
Replication Schedule: Start Stop Sunday 22:00 05:00 Monday 22:00 05:00 Tuesday 22:00 05:00 Wednesday 22:00 05:00 Thursday 22:00 05:00 Friday 22:00 05:00 Saturday 22:00 05:00
Creates a new Cleaner or Replication schedule for a DR Series system (on a source DR). For a specific container, you would use the --name <name> command option with the start time and stop time set points.
|
|
NOTE: Without any Cleaner schedule set, the DR Series system Cleaner process automatically starts within two minutes after it detects that no data ingest operation or other system operation activity is present. So, if your DR Series system runs intermittent or inconsistent ingest, readback, or replication operations, there is no need to set a Cleaner schedule (it will automatically run during periods of low or non-activity). However, if your system runs regular and consistent ingest, readback, or replication operations, you should create a Cleaner schedule that runs only during a known period of low or non-activity (for example, on a day or time period sufficient to complete this process). If your system does not meet either of these cases, you can still manually run the Cleaner. For more information, see maintenance --filesystem [--reclaim_space]. |
schedule --add --day Sunday --start_time 06:00 --stop_time 22:00 --cleaner
|
|
NOTE: Set a corresponding stop time for every start time in each Cleaner (or Replication) schedule you create. The following example shows setting up a Cleaner schedule for the remainder of the week (Monday through Saturday). |
|
|
NOTE: Do not select 00:00 for a start time or stop time endpoint for midnight when setting Cleaner or Replication schedules (instead, use either the 23:55 or 00:05 value). |
Successfully updated Cleaner schedule.
|
|
NOTE: To create a Replication schedule (use the DR Series system CLI --replication command), and the same process shown here to schedule the start and stop times for a Replication schedule. This lets you schedule start and stop times for each day in the week in which you want the Replication process to run. |
Deletes a day in an existing Cleaner or Replication schedule for a DR Series system (on a source DR). The --name option is only applicable for replication and not for the cleaner. You can use it to specify a container.
|
|
NOTE: To delete days from either an existing Cleaner or Replication schedule, specify the day in the week and the schedule type. |
schedule --delete --day Sunday --replication --name Container1
Successfully updated Replication schedule.
Displays the list of schedule-related options that can be used as a reference when using the DR Series system CLI.
schedule --help
Usage:
schedule --show [--cleaner]
[--replication]
[--name <name>]
schedule --add --day <Day of the week (Sunday|Monday...)>
[--start_time <hh:mm>]
[--stop_time <hh:mm>]
[--cleaner]
[--replication]
[--name <name>]
schedule --delete --day <Day of the week (Sunday|Monday...)>
[--cleaner]
[--name <name>]
[--replication]
schedule --help
schedule <command> <command-arguments>
<command> can be one of:
--show Displays command specific information.
--add Adds a schedule for replication/cleaner (use on source DR).
--delete Deletes a replication/cleaner schedule (use on source DR).
For command-specific help, please type schedule --help <command>
For example:
schedule --help show© 2024 Quest Software Inc. ALL RIGHTS RESERVED. Terms of Use Privacy Cookie Preference Center