Quest® vRanger® 7.6.6

Quest® vRanger® 7.6.6

August 2018

These release notes provide information about the Quest® vRanger® release.

About this release

vRanger Backup & Replication is the market-leading backup, recovery, and backup-management solution for VMware® and Hyper-V® virtual environments. vRanger automatically discovers new virtual machines (VMs), reduces backup windows, provides smarter backup options, and offers more scalability through its agent-less architecture and features while using fewer resources.

vRanger capabilities:

•	Performs incremental, differential, or full image backups of virtual and physical machines.

•	Restores the entire machine or specific files.

•	Manages disaster recovery strategies and protects critical data in virtual environments.

•	Replicates VMs to more than one destination, which lets you accomplish multiple high-availability and disaster recovery objectives based on your specific needs.

vRanger 7.6.6 is a minor release with additional features. See New features for more detailed information.

New features

New features in vRanger 7.6.6:

•	Support for VMware vSphere 6.7

 

Known issues

Known issues

The following is a list of issues, including those issues attributed to third-party products, known to exist at the time of release.

 

Table 1. Installation known issues

Known issue	Issue ID
The vRanger Service does not start after installing vRanger on WIndows Server 2008 R2 SP1.   Workaround: When installing vRanger on Windows Server 2008 R2 SP1, the Windows Management Framework 3.0 must also be installed in order for the vRanger Service to run. Options for installing WMF 3.0 are: Before installing vRanger: 1 First, manually install the Microsoft .Net Framework 4.5. 2 Install the Windows Management Framework 3.0 using the installer available in Microsoft KB article KB2506143. 3 Install vRanger. After installing vRanger: 1 Install vRanger as documented in the vRanger Installation/Upgrade Guide. If the .Net Framework 4.5 is not already installed on the server, it will be installed automatically during the vRanger installation process. 2 Install the Windows Management Framework 3.0 using the installer available in Microsoft KB article KB2506143. 3 Confirm the vRanger Service is started. 4 Start vRanger.	VR-177
When installing vRanger with the embedded database on Windows Server 2016, the installation may freeze due to a Microsoft issue with installing SQL Server R2 Express on Windows Server 2016.	VR-459
When installing or upgrading vRanger on a Micrsoft Windows 2012 R2 Server, the vRanger GUI may fail to launch with following error: “FileNotFoundException. Could not load file or assembly 'Vizioncore.vRanger.FLR.dll' or one of its dependencies. The specified module could not be found.”   Workaround: This issue is caused by a corrupted Visual C++ 14.0 installation on the installation server. To resolve this issue 1 Uninstall the current Visual C++ 14.0 instance. 2 Install the updates from the following Microsoft Knowledge Base articles: ▪ KB2939087 ▪ KB2975061 ▪ KB2919355 ▪ KB2999226 3 Reinstall VC++14.0 4 Perform fresh install /upgrade for vRanger 7.6
If the Quest vRanger Service is installed with a user other than the currently logged in user, use mixed-mode authentication for SQL Server® and authenticate with the system administrator (sa) user. Alternatively, Windows®-only authentication can be used if the following workaround is implemented. Workaround: 1 Log in to Windows as the install user. 2 Run a command prompt, and type: sqlcmd -S .\vRangerPro use vRangerPro go 3 Replace VRANGER\vRangerServiceUser with the name of the vRanger service user in the following command: EXEC sys.sp_addsrvrolemember @loginame=N'VRANGER\vRangerServiceUser', @rolename=N'sysadmin' go quit exit 4 Stop and start the Quest vRanger Service. vRanger is able to connect to the service.	17210
If you did not remove the vRanger database during a vRanger uninstall, you must use the same credentials as the original install or grant rights to the database for the new user when reinstalling vRanger.	17705
vRanger is available in three versions: vRanger Standard Edition (SE), vRanger Backup & Replication, and vReplicator. Only one version of vRanger can be licensed on a machine at any one time. For example, you cannot license vRanger SE and vReplicator on the same machine.
When vRanger is installed on Windows 8.1 or Windows Server 2012, using the Uninstall icon to remove the application fails unless the uninstall is performed using the Administrator role. Workaround 1: 1 Move the cursor to the upper-right or lower-right corner of the screen. 2 When the Charms bar appears, select the Start icon. 3 Right-click in an empty space on the Start screen, and select All Apps. 4 Using the scroll bar at the bottom, scroll right to the Quest section. 5 Look for the Uninstall tile above the vRanger Backup & Replication tile. 6 Right-click the Uninstall tile, and select Run as Administrator. The uninstall starts as it normally does. Workaround 2: You may also uninstall vRanger using the Programs and Features application in the Control Panel.	15470
When a proxy server is configured on the vRanger machine, vRanger may not be able to connect to VMware® vCenter™ Servers or NetVault SmartDisk repositories. Workaround: 1 Log in to the vRanger machine using the account used to run the three vRanger services. If you are unsure what the account is, use Microsoft Management Console (MMC) to check the services.msc file. 2 Open Internet Explorer® (IE) while logged-in with the account. 3 Go to Internet Options > Connections > LAN settings; this location varies depending on the version of IE installed on the machine. 4 Make sure that no proxy information is defined, and no proxy server is being used. 5 Clear the automatically detect settings check box, in case your particular environment has an automatic proxy script set up.
During an upgrade, the vRanger Upgrade Installer might not delete the previous vRanger Pro Service event log. This exclusion causes the vRanger user interface (UI) to hang and display a “Could not connect to the service” message after the upgrade. To remove the log manually, complete the following steps: Workaround: 1 Disable the Event Log service. 2 Restart the vRanger machine. 3 From the vRanger machine’s %SystemRoot%\System32\Config folder, delete the vRanger *.evt file. 4 In the Windows Registry, delete the vRanger entry from the “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog” key. 5 Restart the Event Log service.	13623
When the Quest vRanger Service is configured for a delayed start, and the vRanger Upgrade Installer is run before the existing Quest vRanger Service has started, the upgrade fails when the Quest vRanger Service starts. Workaround: Wait until the Quest vRanger Service starts to perform an upgrade. The vRanger Upgrade Installer stops the service if it is running.	13687
If vRanger is installed using a local admin account, and that account is changed after vRanger is uninstalled, you must use SQL Server authentication for the database installer for both vRanger and Cataloging when you reinstall vRanger. If the second local admin account does not have access to the database, grant that account administrator access to the SQL Server instance before installation.	16034

 

Table 2. General known issues

Known issue	Issue ID
In order to protect Microsoft System Center Virtual Machine Manger (SCVMM) servers, the version of the SCVMM Administrator Console matching the servers to protect must be installed on the vRanger machine. Two different versions of the SCVMM Administrator Console cannot be installed on the same vRanger machine, meaning that one vRanger machine can only protect one version of SCVMM servers. Workaround: If you need to protect multiple versions of SCVMM with vRanger, you must either: • Upgrade older SCVMM versions so that only one version exists in your environment • Use multiple vRanger servers	VR-429
Domain controller and domain authentication issues can cause errors such as: • VM backups encounter 2129 Can’t Write errors to CIFS repositories with any transport type. • Physical machine backups encounter 2129 Can’t Write errors to CIFS repositories. • Virtual appliance (VA) backups fail with 2129 Can’t Write errors to CIFS repositories. • Physical machine shows as Disconnected in Inventory. Workaround: The following lists some common situations that can cause these issues: • System Time synchronization: If any of the systems — AD server, the DNS server, and so on — is not within the allowed time drift, authentication can fail. • Domain membership: The machine may be part of the domain, as seen when you bring up the computer properties, but the membership may not be active, and may have to be reset. To check the status of the systems domain membership from the machine itself, use the command: netdom verify %computername% /verbose	15187
Paths for Common Internet File System (CIFS) repositories are case-sensitive. When configuring a CIFS repository, ensure that the path for the repository is entered in the correct case.	15468
When configuring repository connections, the credentials used cannot contain an asterisk (*) or a question mark (?)	17273
When a Backup Group contains two Windows 8.1 or Windows Server 2012 VMs that are clones of each other, and that group is backed up using HotAdd, only one of the cloned machines restores properly.	15112
Refreshing Windows Disk Management on the vRanger VM may cause a HotAdd backup to fail over to a network backup.	12302
When vRanger is installed on a VM that contains two paravirtualized (PVSCSI) controllers, mounting of paravirtual volumes by using HotAdd fail, causing vRanger to continue operations using the configured failover method — network for backup, or the configured transport failover option for replication. Workaround: Often, one of the PVSCSI controllers is empty and can be safely removed. Removing this second, empty controller from the vRanger machine allows HotAdd operations to process normally.
During periods of heavy activity on the vRanger machine, HotAdd backup tasks may fail over to LAN backups with the following message. Sometimes, the LAN backups fail with the same error. Backup task using VDDK Hot-add failed: RETRY operation timed out [at xtimedwait:416] These errors can be caused by excessive resource contention, which causes vRanger message queues to become out of synch. Workaround 1: To avoid task timeout errors, schedule jobs to avoid excessive resource contention on the vRanger machine. Workaround 2: If rescheduling jobs is not an option, you may increase the timeout value to allow the vRanger message queues to recover from issues caused by resource contention. To change the timeout value: 1 Browse to the vRanger installation directory. By default, this directory is C:\Program Files\Quest\vRanger. 2 Open the Vizioncore.vRanger.Service.exe.config file in Notepad. 3 Search the file for CommitTimeout, and change the timeout value to 450. 4 Save the file. 5 Restart the Quest vRanger Service to implement the changes.
Backup jobs for Hyper-V® Servers are shown twice in the Backup Job Summary Report.	16907
When the vCenter User credentials are changed, the change does not take full effect until the Quest vRanger Service is restarted.	17038
In some circumstances, Changed Block Tracking (CBT) does not show as enabled for some VMs in the vRanger inventory. This issue is due to an error described in VMware KB article 2075984. Workaround: To resolve this issue, perform the workaround documented in VMware KB article 2075984.	17528
When creating Hyper-V virtual machines, avoid using special characters. The [ ] (square brackets) and ‘ (backtick) specifically should not be used.

 

Table 3. Backup known issues

Known issue	Issue ID
When vRanger is installed on a server with FIPS enabled, backups fail with error “Backup task using VDDK HotAdd failed: This implementation is not part of the Windows Platform FIPS validated cryptographic algorithms.”   Workaround: Disable FIPS on vRanger machine	VR-521
Backup and replication jobs are unable to use a second SCSI controller attached to the vRanger VA or vRanger server. The jobs fail with the error “error 2760 - You do not have access rights to this file.”	VR-617
VA-based Hot add backups fail with Error: -1 - An unknown error has occurred. The following error will also appear in the Support logs: “mkdir: cannot create directory '/var/tmp/vix/dd57d1da-22ee-4a9b-9988-310e8b608c3f': Read-only file system” Workaround: The error is caused by the ext4 root file system being mounted as read-only. Reboot the VA and re-run the job.	VR-489
Backups to EMC Data Domain Boost 5.7 repositories may generate the error message: “OST secure query RPC failed . . .”. This error message is the result of newer EMC Data Domain Boost libraries failing back to legacy connection protocols and can be ignored.	VR-440
When performing SAN backups of VMs created in VMware® vCloud Director® from a template, the backup may fail with the “Error: 2760 - <VIXcannotOpenDetails> VIX can’t open…” error. The VMware SAN mode transport searches for VMs by BIOS UUID. By default, all instances and VMs that are deployed from a given catalog vApps/template in vCloud Director are assigned the same BIOS UUID. For more information, see VMware KB article 1002403. Workaround: To resolve this issue, perform the workaround documented in VMware KB article 2002506.	17591
When performing a quiesced backup of a Windows Server 2012 VM without using vzShadow.exe, event log errors are generated for System Reserved volumes during snapshot creation.	14130
The VMware QueryChangedDiskAreas API returns incorrect sectors after extending the VM VMDK file with CBT enabled. This issue causes the CBT filter to become invalid, possibly corrupting vRanger backups. For more information, see VMware KB article 2090639. Workaround: Ensure that the patches described in VMware KB article 2090639 are applied, and follow other workaround recommendations documented in the KB as appropriate for your environment.
When using the vzShadow.exe executable to perform application-consistent backups, lettered drives are required. The use of vzShadow.exe to quiesce mount points with databases is not supported.
When backing up Windows Server 2008 R2 VMs with multiple disks, and the Enable Guest Quiescing option is selected, some backup tasks may fail with the “API Call failed with message: A general system error occurred: Protocol error from VMX” error. Workaround: For options to resolve this issue, see VMware KB article 1037071.
When performing full backups with CBT enabled, the CBT operation may fail with the “Change Block Tracking not enabled on <disk>” error. When performing incremental or differential backups of the same VMs, CBT functions properly. The following scenarios have been shown to cause this error, although not in all cases: • VMware® ESXi™ host crash • VMX crash • Storage vMotion® of the VM — while powered off • Changes in the VM disk configuration that cause the disk device key to change • A disk was detached from the VM, and re-attached • HotAdd Workaround 1: Sometimes, performing the following steps resolves this issue. 1 Remove the snapshot from VM. 2 Disable CBT. 3 Enable CBT. 4 Take a snapshot. Workaround 2: Sometimes, deleting the *ctk.vmdk file for each disk in the affected VM resolves this issue.

 

 

Table 4. Restore and file-level restore (FLR) known issues

Known issue	Issue ID
Performing a VA-based, HotAdd restore on vSphere 6.7 fails with error “FATAL vix_cant_write_detail”.   Workaround: This issue is limited to VA based Hot Add restores. Restore jobs affected by this issue can be completed by using either: • the machine-based HotAdd transport • the VA-based LAN transport.	VR-738
Windows Server 2012, 2012 R2, or 2016 VMs that contain Storage Space volumes are not supported for File-level Recovery.	VR-637
When restoring a VM that had an ISO connected when the VM was backed up, the restored VM does not have the ISO connected. Workaround: To ensure that ISO images are attached to a VM when restored: • Change the VM settings to set the StartConnected value of the CD-ROM-image device to True. • Ensure that the restore job option Force Power On is enabled. • Ensure that the path to the ISO image is available to both the backup source VM and the restore target VM.	8366
Some restore tasks fail with the “Error: Restore command exited unexpectedly” error. This issue is caused by a known issue with the VMware VDDK titled “Possible segmentation violation if running multiple backup processes.” For more information, see the VMware VDDK 5.0 Release Notes.	15348
When a standalone ESXi 5 host is added to the vRanger inventory, and that Host is associated with a vSphere® 5 vCenter that is not in the vRanger inventory, restore operations to that host fail with the error: “<host> is being managed by a Virtual Center. Please disassociate the host from the Virtual Center before continuing a Restore operation or register the Virtual Center in vRanger.” Association is a new relationship introduced in vSphere 5, whereby some host resources are managed only by an associated vCenter, and not the host itself. The Host, therefore, does not have permission to perform the operations required to restore a VM. If the vCenter is not in the vRanger inventory, vRanger cannot obtain the required permissions. Workaround: Either disassociate — disconnecting is insufficient — the host from the vCenter, or register the vCenter in vRanger.
If you are connected to the vRanger machine using RDP when installing vRanger, some vRanger components required for FLR may be installed in an unexpected location, causing them to be unavailable when requested by vRanger. This issue causes FLR tasks to freeze while displaying “Loading …” Workaround: If this issue occurs, log out of your RDP session — do not simply exit — and reconnect. vRanger reinstalls the required tools.
When performing a Linux® FLR operation that recovers files and folders with the following characters in the name, the files and folders are displayed with what look to be randomly generated names, and are restored successfully with same random names. Characters that cause this behavior are: \ : * " ? < > |
FLR from a Windows Server 2012 VM, the contents of the mounted disk are not displayed. Workaround: To perform an FLR for a Windows Server 2012, install vRanger on Windows Server 2012.	14131
Windows systems often contain a Microsoft-created hidden partition that is not visible through the Disk Management snap-in. When vRanger catalogs the disk containing this hidden partition, it attempts to catalog this partition and may fail, as the partition is often not formatted with NTFS. vRanger generates a failure message in the log files for this partition which may cause confusion, as this partition is often not known to exist.
The vRanger cataloging feature does not support operation against dynamic disks.	13755

 

Table 5. Physical backup and restore known issues

Known issue	Issue ID
The vRanger Restore CD is not compatible with UEFI. Physical target servers booting into UEFI will not boot the Restore CD. Workaround: To restore a backup to a physical server booting into UEFI, change the boot mode to BIOS. To do so, follow the steps below: 1 Change the boot mode to BIOS for the physical server. 2 Boot using restore CD. 3 Perform restore from vRanger. 4 After successful restore from vRanger, change the BIOS mode back to UEFI.	VR-422
Physical backup of Windows Server 2012 and 2012 R2 machines may fail with the “Failed to create VSS snapshot (P_VSSUTIL_WRITER_ERR)” message. This issue is often due to a VSS timeout caused by resource contention on the source server. Workaround: If possible, adjust the backup schedule so that the backup is performed during a period of lower resource consumption.	16589
If the disk hardware is changed between physical backup or restore tasks, the job should be updated to reflect such changes to ensure that the intended disks are included. In some instances, rebooting the target server causes disks to change IDs — see Microsoft article http://msdn.microsoft.com/en-us/library/windows/desktop/bb968801(v=vs.85).aspx. This change to the IDs results in a machine whose effective hardware has changed.	14369
When deploying the vRanger physical client to a physical server, the account used to install and run the client must have administrative Log on as a service rights. If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster. If you have already assigned this user right to the service account, and the user right appears to be removed, a Group Policy object associated with this node might be removing the right. Check with your domain administrator to find out if this issue is happening. For instructions, see the Microsoft TechNet article Add the Log on as a service right to an account.	15278
If a repository was created using the vAPI, and the path to the repository was entered using backward slashes instead of forward slashes, restoring a physical server savepoint fails with the “Error: 2630 - can’t find uuid” error. Workaround: When configuring repositories using the vAPI, use forward slashes.	15409
The use of dynamic disks are not supported for physical backup. If a physical backup task is performed on a source server containing dynamic disks, the task fails with the “Value cannot be null” message.	14470
Adding a physical source server to vRanger inventory sometimes fails with the “The RPC server is unavailable” error. Workaround: If this error is observed, perform the following actions: 1 On the source server, open the Windows firewall, and select Change Settings. In the Exception tab, select Windows Management Instrumentation (WMI). 2 On the source server, verify that the Remote Procedure Call (RPC) service is started and set to Automatic. 3 On the source server, verify that the Windows Management Instrumentation (WMI) service is started and set to Automatic.
When uninstalling the vRanger Physical Client, the following files are not removed from the physical client installation directory —C:\Program Files\Quest\vRangerPhysicalClient by default. • A numerically designated directory containing the vRanger tools, for example, 201020823162 • serviceconfig.txt • vRangerPhysicalClient.log Workaround: You may remove these files manually.	14554
When restoring to a physical server, vRanger does not lock the source or savepoint. This behavior potentially allows the un-supported practice of creating two simultaneous restore tasks to the same server. Workaround: Ensure that you only configure one restore task per server.	14507
When performing physical backups of an Exchange 2010 server, the task fails with the “Failed to create VSS snapshot on the target machine (P_VSSUTIL_WRITER_ERR)” error. Workaround: To protect Exchange 2010 with physical backups, install Exchange Server 2010 Service Pack 2 on the source server.	14426
When performing physical backups, backup tasks intermittently fail with the “Failed to create VSS snapshot on the target machine (P_VSSUTIL_UNEXPECTED)” error. Workaround: When this problem occurs, log in to the affected source server and restart the Quest Physical Client service.	14711
Sometimes the “The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)” error is encountered while adding a physical machine to vRanger.	14639
When performing physical backups, if the credentials used for authenticating to the source server are changed without updating vRanger, subsequent backup tasks fail with the “Failed to acquire shared resources (Unable to connect to the backup destination.) Failed to connect to the backup destination” error. When this issue occurs, update the credentials in vRanger.	14712

 

Table 6. Replication known issues

Known issue	Issue ID
Performing a VA-based, HotAdd replication on vSphere 6.7 fails with error “FATAL vix_cant_write_detail”.   Workaround: This issue is limited to VA based Hot Add replications. Replication tasks affected by this issue can be completed by using the VA-based LAN transport.	VR-741
Backup and replication jobs are unable to use a second SCSI controller attached to the vRanger VA or vRanger server. The jobs fail with the error “error 2760 - You do not have access rights to this file.”	VR-617
Replication to a target containing vRDM disks is not supported.	16612
When a standalone ESXi host is added to the vRanger inventory, and that Host is associated with a vSphere vCenter not in the vRanger inventory, replication operations to that host fail with the error: “<host> is being managed by a Virtual Center. Please disassociate the host from the Virtual Center before continuing a replication operation or register the Virtual Center in vRanger.” Association is a relationship introduced in vSphere 5, whereby some host resources are managed only by an associated vCenter, and not the host itself. The Host, therefore, does not have permission to perform the operations required to replicate a VM. If the vCenter is not in the vRanger inventory, vRanger cannot obtain the required permissions. Workaround: Either disassociate — do not simply disconnect — the host from the vCenter, or register the vCenter in vRanger.
When performing a failover operation, without synchronizing changes, and the source host is unavailable, the failover task fails and you must manually perform the failover. Workaround: A failover operation performs two key tasks that need to be performed manually if the operation fails: powering on the destination VM, and reversing the direction of replication to ensure that changes to the destination VM are captured when operation reverts to the production site. To replicate a failover task manually, perform the following steps: 1 Disable the original replication job. 2 Power on the destination VM manually. 3 Operate as needed using the destination VM. 4 After the source host is up again, set up a new replication job using the pre-seed function, selecting the original source VM as the pre-seed target. 5 Run the pre-seed replication job. 6 After the job is successful, run a test failover to verify that the changes have been transferred. 7 Power off the destination — disaster recovery — VM, and power on the original source VM. 8 Enable the original job again. The next replication pass should be successful.
When performing a replication task after upgrading the source VM from HW version 4 to HW version 7 or 8, the task may appear to hang, and fail with the “The operation has timed out” message. In this situation, vRanger upgrades the HW version of the replica VM, which triggers a vSphere prompt to update the VMware Tools on the replica VM. Workaround: In the vSphere Client, select Continue with the VM Upgrade for the replica VM.	13817
Replication with the VA fails if the following characters are used when authenticating a vCenter connection in vRanger: | \ / “ ‘ : ; < > , ? [ ] + = * Workaround: Do not use the preceding characters in the username or password used to authenticate to vCenter.
When replicating a VM with a name containing a space in front of a bracket, “ [,” the replication task hangs at 12%.	12163

 

Table 7. Virtual appliance (VA) known issues

Known issue	Issue ID
When editing an existing VA, changing both the datastore and scratch disk size for a VA fails with an error. Workaround: Change either option individually.	16838
Deploying a VA to a standalone host fails if the host is managed by a vCenter.	16792
When deploying the vRanger VA using the Virtual Appliance Deployment Wizard, only one VA is allowed per host. If a second VA deployment is attempted, the VA Deployment Wizard does not let you deploy a VA to a host that has an existing VA.	13606
When creating a VA with the Install-VirtualAppliance vAPI cmdlet, enabling the VADeployStatus parameter may cause failures when used with multiple VAs. Workaround: When deploying more than three VAs with the vAPI cmdlets, use the Get-VirtualApplianceDeploymentStatus cmdlet to retrieve the status.	13834
In some environments, it may be necessary for a customer to add a second network interface card (NIC) to the vRanger VA. To add a second network card: 1 In the vSphere client, add the NIC to the VA. 2 Power on or reboot the VA. 3 Log in to the VA. 4 Run the command: dmesg | grep "rename.*eth" You see two messages indicating the renaming of the real NICs with new Udev NIC names. 5 Find the Udev NIC name for the new NIC, and note the name indicated for the renamed NIC. 6 Run the command: cd /etc/sysconfig This directory already contains one configuration file for the first NIC. 7 Run the following command to create and edit the configuration file for the new NIC where <IFname> is the new name for the new NIC card: vi ifconfig.<IFname> 8 Add these lines: == For DHCP (SAMPLE NIC Interface Name): ONBOOT=yes SERVICE=dhcpcd IFACE=enps2 DHCP_STOP="-k" PRINTIP=yes PRINTALL=no   == For Static (SAMPLE NIC Interface Name & IP Addresses): ONBOOT=yes SERVICE=ipv4-static IFACE=enps2 IP=192.168.1.1 GATEWAY=192.168.1.254 PREFIX=24 9 Restart networking by running the command: /etc/init.d/network restart 10 Check the new NIC and IP configuration by running the command: ifconfig

 

Table 8. Third-party known issues

Known issue	Issue ID
vSphere 5 introduces the vStorage APIs VixDiskLib_PrepareForAccess() and VixDiskLib_EndAccess() to lock and unlock migration for individual VMs. It is observed that on occasion the VixDiskLib_EndAccess fails to unlock the VM and, as a result, that VM is left in a state where vMotion is permanently disabled. Workaround: Follow the steps documented in the VMware KB article 2008957.	13619
Due to a VMware limitation — as documented in the vSphere 5 Documentation — vRanger cannot support operations against datastores with names containing the characters forward slash (/), backward slash (\), and percent (%).	13840 13841
The use of non-standard US-English ASCII characters in certain VM parameters can cause unexpected behavior to occur. For more information, see VMware KB article 1003866.
When special characters are used in a file or folder name, you cannot see that file or folder when browsing the datastore in vCenter. This issue is documented in more detail in the VMware KB article 1015650.
If the host name of a vCenter server contains a character that Tomcat does not support, retrieving health data fails with the “Unable to retrieve health data from <server>…” error. This error occurs because Tomcat requires that host names are RFC 952 complaint. For more information, see VMware KB article 1013507.
Cloning a custom Linux VM fails if the VMs computer name contains Extended-ASCII or non-ASCII characters. For more information, see VMware KB article 2004390.
When creating a Hyper-V backup job, mixing VMs with Cluster Shared Volumes (CSV) and non-CSV volumes is not supported. For more information, see Microsoft KB article 2771882.
When creating or running a backup job, the operation fails with the “Error: 2760 - <VIXcannotOpenDetails> VIX can’t open [XXXXX] XXXX/XXX.vmdk (The host is not licensed for this feature)” error. Workaround: To resolve this issue, remove the vSphere license and then add it back.	17102
In some cases, VMware backup jobs may fail with the error “Error: -1 Backup process had an unexpected failure”. This is a known issue as documented in VMware KB article 2125497 and the VMware VDDK 6.0 Release Notes. Workaround: This issue is believed to be a problem with enabling IPv6 on more than one NIC. To resolve this issue, disable IPv6 on the vRanger machine.	17965

System requirements

System requirements

 

IMPORTANT: The information in this section is a summary. Review the information below and in the “System Requirements” and “Upgrading vRanger” chapters of the Quest vRanger Installation/Upgrade Guide before installing or upgrading to this version of vRanger.

Supported operating systems for installation

Supported operating systems for installation

The following operating systems are supported for installation of vRanger.

 

Table 9. Supported operating systems

Operating system	Service pack level	Bit level
Windows Server 2008 R212	SP1 or later	x64
Windows Server 2012b	All service packs	x64
Windows Server 2012 R2b3	All service packs	x64
Windows Server 2016b	All service packs	x64

---

1

Windows 2008 R2 SP1 requires Windows Management Framework 3.0. Refer to Known Issue VR-177 in the vRanger Release Notes for more information.

2

The Windows Storage Server edition is not supported as an installation platform for vRanger.

3

Before installing vRanger on Windows Server 2012 R2, the updates listed in Additional required software must be installed.